Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Highland Beach
When an electric gate stops responding in Highland Beach, it’s usually not a mystery to us. Salt air, tight shared drives, and storm-shifted tracks create a specific set of failures we see repeatedly along A1A and the condo corridors off it. We diagnose first, then repair, and we do it with the brand already on your property, whether that’s a LiftMaster slide operator on an estate drive or a FAAC swing motor on a mid-rise entry. Call (855) 360-5306 for a free estimate, and we’ll get your gate back online.
Highland Beach is a narrow barrier island. That geography changes how gates fail and how they must be fixed. We stock marine-grade hardware because the local salt air eats standard galvanized parts within a season. We also know that many of your gates sit on shared rights of way where a swing gate simply won’t fit, so slide gates dominate, and slide gates have their own failure profile here: rack and pinion binding, corroded limit switches, photocells knocked out of alignment by wind and debris. This page is about those specific problems and what they cost to fix in Highland Beach.
Key Takeaways
- Electric gate repair in Highland Beach typically runs $185 – $480 for common fixes like limit switches, keypads, and safety sensors; full motor replacement runs $900 – $2,400 depending on brand and gate type.
- Salt-air corrosion is the leading cause of operator failure on the island, and we default to marine-grade stainless and sealed operators here, not as an upgrade but as standard.
- We work on nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
- Same-day response is available for emergency gate failures in Highland Beach when we’re already working nearby; call (855) 360-5306 to confirm.
- Every repair price is quoted and agreed before we start work, so the invoice matches the estimate.
Why Archway Gate Repair Is Highland Beach’s Preferred Electric Gate Repair Company
Highland Beach property managers and homeowners call us because we show up already knowing the gate. Not the address, the gate. A DoorKing on a condo entry off South Ocean Boulevard behaves differently than a Ghost Controls unit on an estate drive off A1A, and we carry that mental catalog to every job. We’re a gate-only shop, so when a control board fails or a loop detector stops reading vehicles, we don’t have to run back to an office to look something up. We fix it.
Our local reputation here is built on showing up fast and replacing only what actually failed. That matters on a barrier island where every gate is a line of defense against salt air, storm surge, and the foot traffic that comes with an oceanfront community. Nelson Arrieta leads our repair team, and his approach is simple: diagnose the failure, explain it in plain English, and give the homeowner a fixed price before any part gets ordered. No trial-and-error on your dime.
Response time to Highland Beach is something we take seriously because a gate stuck open on A1A is a security problem, not just a parking problem. We typically reach most of Highland Beach’s 33487 ZIP code within a short drive from our Miami Gardens base, and we schedule around the building’s access needs when it’s a condo or HOA job. That means setting up a temporary manual open while we work, keeping one lane passable, or coordinating with the front desk when a shared entry gate is being serviced.
Highland Beach residents also appreciate that we don’t try to sell a full replacement when a repair will hold. Repair first, replace only when necessary. That philosophy, combined with brand-specific diagnosis, is why we’re the call most of our Highland Beach customers make when the gate stops mid-cycle.
Styles & brands we work with
Automatic Gate Repair in Highland Beach
Automatic Gate Repair in Highland Beach means working on the full automated system: the operator, the control board, the safety loop, the photocells, and the keypad or card reader that triggers it all. In a place where salt-laden onshore breezes blow constantly, these components corrode faster than they would inland. A Highland Beach homeowner usually needs us when the gate hesitates, reverses for no reason, makes a grinding noise, or simply won’t open from the remote or phone app. In this market, automatic gate repair on a residential property typically runs $200 – $450 for component-level fixes like safety sensors, loop detectors, and keypad replacement. A complete operator swap, when the motor or board is too far gone, runs $1,200 – $2,400 depending on the brand and whether it’s a slide or swing configuration.
Control Board and Safety Loop Diagnosis
Most intermittent gate failures in Highland Beach start at the control board or the loop detector. Corrosion from salt air creeps into connectors and relay contacts, and a board that worked fine after a storm will start failing when humidity spikes. We test each input and output before ordering parts, so you’re not paying for a board when the real problem is a loop detector that’s lost its tuning.
Keypad and Remote Control Repair
Oceanfront gates see constant input from keypads, phone systems, and remote controls, and salt air is brutal on keypad contacts and remote fob batteries. We repair or replace keypads with sealed, weather-rated units designed for marine environments, and we reprogram remotes on-site so the whole system talks to itself again before we leave.
Electric Gate Motor in Highland Beach
Electric Gate Motor work in Highland Beach is usually about corrosion or storm damage. The motor sits inside an operator housing that’s supposed to be sealed, but after a season or two of salt spray, seals fail, water gets in, and the motor burns out or starts tripping its thermal overload. Highland Beach homeowners call us when the motor hums but the gate doesn’t move, when the gate stops at random points in its travel, or when the motor makes a high-pitched whine that wasn’t there before. Motor repair at the component level, like replacing brushes or a capacitor, runs $185 – $350 in Highland Beach. A full motor replacement for a slide or swing gate runs $900 – $1,800 depending on brand and whether we’re reusing the existing operator housing.
Slide Gate Motor Replacement
On Highland Beach’s narrow lots and stacked condo drives, slide gates dominate because there’s no room for a swing arc. Slide motors work hard, and when the track shifts from storm surge or settling sand, the motor strains against misaligned rack and pinion, burning out faster. We replace the motor and realign the rack in the same visit so the new motor isn’t fighting the old problem from day one.
Swing Gate Motor Repair
Some Highland Beach estate homes and smaller condo entries still run swing gates, usually FAAC, BFT, or Linear. The hinge posts take the brunt of salt air, and a minor sag at the hinge puts extra load on the motor. We repair the motor and correct the hinge alignment together, because fixing one without the other just buys a month, not a fix.
Trusted Brands We Service in Highland Beach
We work on the brand already on your property. In Highland Beach, that’s often LiftMaster slide operators on estate drives, FAAC swing motors on condo entries, and BFT barriers on commercial or HOA access points. We also service Linear, Viking, and Ghost Controls units regularly across the island. Because we’re brand-familiar rather than brand-guessing, we can often diagnose a failure before we even put a meter on it. For Highland Beach customers, that means fewer trips back and forth and less labor time billed. We keep common parts for these brands stocked, and what we don’t carry, we can usually have in a day or two. If you’re not sure which brand you have, that’s fine; read the label off the operator or keypad and call us, or take a photo and describe the symptom.
Common Electric Gate Repair Problems We See in Highland Beach Homes
- Corroded limit switches and control boards. Salt-laden onshore breezes push salt particles into operator housings and control boxes, and limit switches that should last a decade last a season here. Symptom: the gate opens partway and stops, or won’t close without multiple attempts.
- Storm-shifted tracks and rack-and-pinion binding. Tropical storm winds and storm surge flex gate posts and shift slide tracks. Symptom: a grinding or dragging sound, a gate that stops mid-travel, or motor overload trips on a slide gate that used to run smooth.
- Photocell and safety loop failures. Debris, standing water, and corrosion knock out safety photocells and loop detectors, and the gate will either refuse to close or reverse for no visible reason. These are entrapment protection devices, and a failing one is a safety issue as much as a nuisance.
- Tight shared-drive space damage. On Highland Beach’s shared rights of way, slide gates get squeezed into narrow pockets where the operator housing and photocells get clipped by passing vehicles or flooded by runoff. Symptom: operator housing damage, water in the motor, or a gate that has to be reset at the breaker repeatedly.
On a tight A1A estate drive in Highland Beach, a LiftMaster slide gate operator had corroded limit switches from constant salt spray and the gate was dragging on its rack and pinion. We replaced the operator with a sealed marine-grade unit, corrected the sag at the hinge post, and realigned the track, all while keeping the driveway passable for the homeowner’s vehicles. We also added a safety photocell test to the service ticket and verified the loop detector still triggered reliably after the repair. That’s the Highland Beach job in one paragraph: salt, space, and keeping the driveway usable while we work.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Highland Beach, FL
In Highland Beach, a typical electric gate repair visit runs $185 to $480 depending on what failed. Here’s the breakdown we quote from, and every price is agreed before we start:
- Diagnostic visit (applied toward repair): $85 – $125
- Limit switch or safety sensor replacement: $185 – $320
- Keypad repair or replacement: $190 – $375
- Control board replacement: $350 – $750 depending on brand
- Gate motor replacement (slide or swing): $900 – $1,800 for the motor and labor, higher if the operator housing also needs replacement
- Full slide operator replacement with marine-grade housing: $1,600 – $2,400
What changes the price in Highland Beach specifically is the salt-air factor. A standard galvanized replacement part costs less up front, but it’ll pit within a season or two on this island. We quote marine-grade parts as the default because that’s what actually holds up here. We don’t mark up parts. You’ll see the line item before we order it, and the price we quote is the price you pay. Call us at (855) 360-5306 for a free estimate, and we’ll give you an exact number based on your gate’s brand and what we find.
We Also Serve Cities Near Highland Beach
Highland Beach is one part of our regular service area. We also handle Electric Gate Repair for neighbors in Delray Beach, Boca Raton, Kings Point, and Villages of Oriole. Many of those communities share the same salt-air and storm-surge failure profile, and we apply the same marine-grade standard across the whole coastal strip. If you’re just over the line from Highland Beach, you’re still close enough for a same-day visit.
Serving Highland Beach, FL — Our Local Coverage Area
We’re based in the Highland Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Highland Beach
Salt air is the main reason operators fail frequently in Highland Beach. Constant onshore breezes push salt particles into operator housings, control boards, and limit switches, where they corrode contacts and cause intermittent failures within a season or two. We address this by installing sealed, marine-grade operators and hardware as standard, not as an upgrade. Call us at (855) 360-5306 for an exact diagnosis of your gate’s failure.
Yes, that’s one of the most common jobs we do in Highland Beach. On shared rights of way where a swing gate won’t fit, we repair slide gates while keeping one lane passable throughout the work. We work in the existing footprint, we don’t ask you to close the driveway, and we coordinate with the other residents on the shared right of way when needed. Call (855) 360-5306 and describe your driveway layout; we’ll tell you how long the repair should take.
We inspect the posts, track, rack and pinion, and operator mounting after a storm, then realign everything in one visit. Storm surge and wind shift posts and tracks, and a gate that drags or binds after a storm usually needs both mechanical realignment and an operator check. We also verify the safety photocells and loop detector after realignment, because those are often the next thing to fail. Call (855) 360-5306 to schedule a post-storm inspection.
Yes, LiftMaster and FAAC are two of the most common brands we service in Highland Beach, and we know them both well. LiftMaster slide operators are common on estate drives along A1A, and FAAC swing motors are common on condo and HOA entries. We stock parts for both, and we can usually diagnose a failure in one visit. Call (855) 360-5306 with your brand and model, and we’ll confirm we have what the job needs.
Entrapment protection is the set of safety devices that keeps a gate from closing on a person, vehicle, or pet: safety photocells, loop detectors, and the motor’s obstruction-sensing circuit. These fail more often in Highland Beach because of salt corrosion and wind-blown debris, and a gate with failed entrapment protection is dangerous, not just annoying. When we repair a gate, we test and verify every entrapment protection device before we call the job done. Call (855) 360-5306 if your gate is reversing erratically or ignoring the safety beam.
Contact Archway Gate Repair in Highland Beach
If your electric gate is down, dragging, or opening on its own, call us at (855) 360-5306 for a free estimate. We’ll tell you what we think is wrong based on the brand and symptom, then give you a fixed price before any work starts. Highland Beach salt air doesn’t wait, and neither do we. Same-day visits are available when we’re already in the area, and we’ll work around your driveway access so life keeps moving. That’s the Archway standard: diagnosed, not guessed, repair first, and the gate back online by the time we leave.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Highland Beach with electric gate repair, automatic gate repair, and gate motor work.