Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Hobe Sound
When an electric gate stops working in Hobe Sound, the problem is rarely simple. Salt air, heat, and hurricane season combine to punish gate hardware in ways you won’t see ten miles inland. We’re Archway Gate Repair, a gate-only specialist serving Hobe Sound with same-day diagnosis in most cases. If your gate won’t open, stalls partway, or the keypad has gone dead, call us at (855) 360-5306. We work on the brand already on your property, and we’ll tell you the price before any work begins.
We know Hobe Sound’s gates the way a mechanic knows saltwater boats. Different animal. Different fixes.
Why Archway Gate Repair Is Hobe Sound’s Preferred Electric Gate Repair Company
Hobe Sound homeowners and HOA managers call us for one reason above all: we recognize the equipment on the property before we finish the first sentence of the service call. A LiftMaster swing gate off SE Bridge Road, a BFT slide operator on a community entrance in 33455, a Viking unit on an estate near the Intracoastal. We’ve been inside all of them. Diagnosed, not guessed.
The repair-first philosophy matters here. We don’t start with a replacement quote. We start with the failure point: the motor, the board, the hinge post, the photo-eye. Then we tell you what it takes to get your electric gate back online. If replacement is genuinely the better call, we’ll say so. If a $180 board repair gets you five more years, that’s what we recommend.
Nelson Arrieta leads our team with a simple standard: from the motor to the hinge, every electric gate repair in Hobe Sound gets treated as a full-system diagnosis, not a part swap. That’s why property managers along the SE Bridge Road corridor keep us on speed dial.
Styles & brands we work with
Electric Gate Motor in Hobe Sound
An electric gate motor in Hobe Sound lives a hard life. Salt spray from the Atlantic and Intracoastal creeps into housings, attacks terminals, and shorts boards. A typical electric gate motor repair in Hobe Sound runs $240-$480 when the motor itself is saveable; full operator replacement on an estate swing gate can go from $1,200 to $3,800 depending on the brand and the gate’s weight.
When a Motor Is Worth Saving
The tell is usually corrosion at the terminal block or a blown capacitor, not a seized armature. If the motor still runs but trips its breaker or moves in jerks, it’s often an electrical contact problem rather than mechanical death. We test load draw, check for water intrusion, and only recommend replacement when the windings are gone or the gearbox is failing.
Salt Corrosion and Motor Wiring
Hobe Sound’s salt-laden air attacks copper connections long before motor internals fail. We regularly find green corrosion across control board terminals on LiftMaster and FAAC units that are only three or four years old, while the same hardware in Stuart lasts twice that. Prevention here means sealing entry points, replacing non-stainless fixings, and using dielectric grease on exposed terminals after every repair.
Gate Access Control in Hobe Sound
Gate access control in Hobe Sound covers everything from a simple keypad to a full phone-entry or transponder system on a gated community. Repair or replacement of a gate access control keypad or receiver in Hobe Sound typically runs $350-$900, while full panel upgrades for community or commercial entrances range from $1,800 to $5,500 depending on the number of codes, remotes, and integration requirements.
Keypads, Remotes, and Receivers
When a keypad stops accepting codes or remotes work only from three feet away, the failure is usually in the receiver board or the antenna run. Salt air corrodes the solder joints and antenna connections over time. We test the keypad itself, then the receiver sensitivity, then the control board, in that order. No parts cannon. You’ll know exactly what failed and what it costs.
HOA Gate Systems and Multi-User Panels
Hobe Sound’s gated communities along the Atlantic Ridge corridor rely on DoorKing, Linear, and BFT systems that manage dozens or hundreds of users. When those panels fail, every resident is affected. We’ll get a diagnostic on the panel, operators, and safety loops the same day we arrive, and most community gates are back to normal within 24 hours of parts being confirmed.
Trusted Brands We Service in Hobe Sound
Our technicians are factory-familiar with the gate brands most common in Hobe Sound: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite, along with Mighty Mule for smaller residential setups. That means we arrive knowing each brand’s specific failure patterns. And for Hobe Sound customers, we stock common replacement boards, remotes, safety sensors, and motors locally, which cuts days off the repair timeline. You don’t wait while a part rides a truck from another state.
Common Electric Gate Repair Problems We See in Hobe Sound Homes
- Corroded control boards and terminal strips. Salt air finds its way into operator housings faster than you’d think. Green terminals on a FAAC or LiftMaster board are the single most common electric gate failure we see in the 33455 and 33475 zip codes.
- Sagging swing gates at the hinge post. It’s rarely the panel itself. Hobe Sound’s sandy soil and occasional standing water after storms let hinge post footings shift, and the gate binds because the post moved, not because the frame warped. We fix the post and re-shim the hinge, not the panel.
- Photo-eyes and safety edges throwing false readings. Dried salt film and leaf debris across sensor lenses cause gates to refuse to close or to reverse for no clear reason. A cleaning and lens replacement usually clears it in one visit.
- Welds and painted-steel hardware rusting through. On ornamental estate gates, the original wrought iron has a specific patina that HOAs expect us to preserve. Non-stainless bolts and painted-steel straps corrode within a few seasons and leave rust streaks down the pickets. We replace with stainless and treat new metal to blend with the aged finish.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Hobe Sound, FL
Here is what Hobe Sound homeowners actually pay for common electric gate repairs. Gate motor repair: $240-$480. Control board replacement: $180-$620 depending on brand. Keypad repair or replacement: $350-$900. Safety sensor or photo-eye replacement: $150-$340 per sensor. Full operator replacement on an estate swing gate: $1,200-$3,800. Full access control panel on a community entrance: $1,800-$5,500.
The main variables are the gate’s weight and length, the brand of the existing operator, and whether the post footings need resetting. Every estimate is free. The price we quote is the price you’ll see on the invoice. We confirm it with you before any work starts, and no repair moves forward without your approval.
Call (855) 360-5306 for an exact quote on your Hobe Sound gate. Estimates are free and we come to you.
We Also Serve Cities Near Hobe Sound
If you’re in Port Salerno, Tequesta, Stuart, Jupiter, or anywhere along the Treasure Coast, our Electric Gate Repair team covers your area too. We’re based in South Florida, and Hobe Sound is one of the communities we serve regularly. You can learn more about our local coverage on our Hobe Sound service page.
Serving Hobe Sound, FL — Our Local Coverage Area
We’re based in the Hobe Sound area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Hobe Sound
Hobe Sound’s salt air is the direct cause. Ocean spray and Intracoastal humidity carry chlorides that corrode control board terminals, connectors, and motor housing fasteners in a fraction of the time the same parts last inland. Gates along SE Bridge Road and the Atlantic Ridge sit close enough to the water that salt reaches them daily. The fix is not just cleaning the corrosion. It’s sealing entry points, replacing painted-steel hardware with stainless, and applying protective coating to the board. Call (855) 360-5306 and we’ll inspect your operator for salt damage before it kills the board completely.
In Hobe Sound, it’s almost always the hinge post. Sandy, shifting soil and storm water undermine post footings, and the post leans or settles, which makes the gate bind and drag at the latch side. The gate panel itself rarely warps unless a tree has fallen on it. We correct the post, re-shim or replace the hinge, and get the gate swinging clean without unnecessary panel work. Call (855) 360-5306 for a free assessment, and we’ll tell you exactly which component moved.
Yes, and it’s a request we handle constantly in Hobe Sound. Decades of salt spray on estate gates creates a weathered patina that owners and HOAs want preserved. New galvanized parts bolted on look shiny, clean, and obviously wrong. We treat and blend new metal to match the surrounding aged finish before installation. The repair disappears into the gate instead of standing out on it. Call (855) 360-5306 and describe your gate. We’ll quote the repair including the patina match.
Yes. Under federal UL 325 standards that Florida enforces on automatic gates, your gate must have functioning entrapment protection: photo-eyes, safety edges, or an equivalent reversing mechanism. If your gate closes on someone or something because the sensors are disabled or failed, the liability falls on the owner. Many older Hobe Sound gates were installed before current standards and are out of compliance. We test entrapment protection on every repair visit and can bring older systems up to standard. Call (855) 360-5306 if you’re not sure whether your gate meets current requirements.
A well-spec’d solar opener will hold up, but the panel mounting and battery enclosure matter more than the opener itself. Wind-rated panel mounts and sealed battery boxes survive Hobe Sound storms; flimsy mounts and exposed batteries don’t. We recommend solar for gates where running conduit from the house isn’t practical, and we install panels with hurricane-rated brackets and charge controllers sized for storm-season cloud cover. If you already have a solar gate opener that failed after a storm, call (855) 360-5306. We’ll inspect the panel, battery, and controller and tell you what needs replacing versus what’s still sound.
Contact Archway Gate Repair in Hobe Sound
If your electric gate is down, erratic, or failing its safety checks, don’t wait for it to strand you outside the driveway on a wet morning. Call Archway Gate Repair at (855) 360-5306 for a free estimate. We’ll put a brand-familiar technician on your Hobe Sound gate, tell you the exact repair price before any work starts, and get you back to operating on a fixed, honest schedule. Licensed, insured, and gate-only since day one. From the motor to the hinge, we handle it.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Hobe Sound and the Treasure Coast.