Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Washington Park
Electric gate repair in Washington Park usually means diagnosing an owner-built or secondhand system that was never quite right to begin with. We typically reach Washington Park homes off Sunrise Boulevard or Broward Boulevard within the hour, and most opener and control board repairs are finished the same visit. If your gate has stopped responding to the remote, is sagging onto the track, or trips its breaker every time it cycles, call Archway Gate Repair at (855) 360-5306. We work on the brand already on your property and we diagnose before we quote.
Why Archway Gate Repair Is Washington Park’s Preferred Electric Gate Repair Company
Washington Park is a small, historically Black residential pocket of unincorporated Broward County in ZIP 33311, and most of its homes sit on compact 1950s to 1970s lots with chain-link, wrought-iron lookalike, or DIY-built driveway gates. Those gates are rarely builder-installed. They’re owner-modified, secondhand, or welded together over a weekend, which means the opener label often doesn’t match the actual wiring or voltage. Our Electric Gate Repair team knows to check the hardware before trusting the sticker. That is not a guess. It is experience with exactly this kind of housing stock.
Led by Nelson Arrieta, Archway Gate Repair is a gate-only specialist. We don’t fence. We don’t do garage doors. Every job we take in Washington Park is a gate job, and electric gate repair is our core specialty, not an add-on. We are factory-familiar with LiftMaster, FAAC, Mighty Mule, Elite, and several other major brands, so the diagnosis usually happens in the first few minutes on site, not after two hours of trial-and-error. Homeowners in Washington Park call us because the first repair attempt is usually the correct one, and the price is agreed before any work begins.
Styles & brands we work with





Gate Opener Repair in Washington Park
Gate opener repair in Washington Park typically costs between $185 and $420 depending on whether we are replacing a capacitor, a control board, or a full opener arm. The opener is the motorized unit that swings or slides your gate, and on the owner-built gates common to Washington Park, it is frequently mounted to a post that was never set deep enough for the panel it is moving. That means half the repair is electrical and the other half is mechanical recalibration. We check both in the same visit.
Control Boards and Voltage Mismatches
Many Washington Park gates run openers that were installed by a previous homeowner, not a licensed technician. The label might say 24V while the transformer feeds 12V, or the remote is a universal unit that was never properly paired. We verify the actual voltage, replace corroded control boards, and re-pair remotes and keypads to match what is really on the property.
Opener Arm and Motor Replacement
When the opener arm has burned out from years of moving a gate that drags, replacement in Washington Park usually runs $260 to $380 for common brands like Mighty Mule and LiftMaster. We quote the exact part price before touching a screw, and we always check why the old motor failed so the new one does not inherit the same problem.
Automatic Gate Repair in Washington Park
Automatic gate repair in Washington Park generally runs $160 to $500, with the higher end covering a full operator replacement plus safety sensor rewiring. An automatic gate is the whole assembly: the gate panel, the opener, the safety photocells, the keypad or remote receiver, and the wiring between them. In a subtropical climate like Washington Park’s, salt-laden inland air gets into every one of those components, so a single failed part is rarely the whole story.
Safety Sensors and Entrapment Protection
Bypassed photocells are the most common code violation we find on Washington Park driveways. A prior owner disables them to stop nuisance reversals, and suddenly the gate will not close without holding the button. We restore entrapment protection, align the sensors, and test the auto-reverse function so the gate meets current safety standards.
Hurricane-Season Damage
Washington Park sits inland far enough to avoid storm surge, but hurricane wind loads and flying debris still bend tracks, snap rack teeth, and knock gate panels off their rollers. After a storm passes, we reset panels, straighten or replace track sections, and re-tension chain drive systems so the operator is not fighting a bent frame.
Trusted Brands We Service in Washington Park
We are factory-familiar with nine of the most widely installed gate brands in the country, and on Washington Park properties we most often see LiftMaster, Mighty Mule, FAAC, and Elite. We know each brand’s specific failure points before we arrive: the capacitor that goes first on a Mighty Mule swing arm, the control board revision that fails on older FAAC operators, the sensor wiring harness that corrodes on LiftMaster slide units. We carry common parts and boards for these brands on our trucks, so a Washington Park repair is usually a same-visit fix, not a two-trip parts wait.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Washington Park Homes
- Sagging swing panels from failed hinge post footings. The concrete footing at the post base cracks or sinks in Washington Park’s sandy soil, and the panel drags until the opener overloads. Fixing the post is what actually fixes the gate, even though the opener gets the blame.
- Owner-built wiring that has never matched the opener. Secondhand or DIY installs on compact Washington Park lots often mean the transformer, board, and remote are from three different systems. We trace every wire and rebuild the circuit to match the opener label.
- Corroded boards and battery backups from salt-laden air. Washington Park’s inland location still gets enough coastal salt in the air to green out control boards and kill battery backups within a few years, especially on unsealed enclosures mounted outside.
- Broken tracks and bent racks after hurricane-season debris strikes. Gates on narrow side yards off tight Washington Park streets are exposed to wind-driven branches, and a single bent rack tooth will jam a slide gate every cycle.
Pricing for Electric Gate Repair in Washington Park, FL
Service call and diagnosis in Washington Park runs $65 to $95, credited toward the repair if you approve the work. Gate opener repair falls between $185 and $420. Replacing a corroded control board is $220 to $350. Safety sensor repair or rewiring is $120 to $200 per sensor pair. Full operator replacement starts at $500 and goes up with gate size and brand. Every quote is written and agreed before we start, so the invoice matches the number we gave you.
We Also Serve Cities Near Washington Park
Archway Gate Repair covers Electric Gate Repair in Washington Park and the surrounding Broward communities, including Boulevard Gardens, Rock Island, Roosevelt Gardens, and Broward Estates. If your gate is in one of those neighborhoods, the same techs and the same truck stock cover it. Call (855) 360-5306.
Serving Washington Park, FL — Our Local Coverage Area
We’re based in the Washington Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Washington Park
Yes, that is most of what we see in Washington Park. We re-pair the remote to the actual opener, verify the voltage and board, and replace the remote or receiver if either is incompatible. The repair starts at $120 for a simple remote re-pair. Call (855) 360-5306 and describe what is on the gate now.
Most Washington Park properties are in unincorporated Broward County and are not part of an HOA, so there is no architectural-review committee to approve gate work. Approval is a county permitting question if you are replacing a full masonry or oversized gate, and a homeowner decision for ordinary repairs. We can tell you on site whether your repair is a simple service call or something that needs a permit pull. Call (855) 360-5306 for a free assessment.
Because the problem is almost never the panel. On Washington Park’s compact lots, the hinge post footing was often poured too shallow for the gate’s weight, and the post rocks in sandy soil until the panel drops. We rebuild the post footing and re-hang the gate so the opener stops dragging and burning out. Expect $400 to $700 for a post footing rebuild and panel re-hang.
Yes, automatic gates must have functioning entrapment protection, usually a pair of safety photocells plus auto-reverse on the motor. If your gate closes on pressure or will not reverse when a child or pet crosses the beam path, the protection is bypassed or failed. We test it on every Washington Park repair and restore it as part of the job. Call (855) 360-5306 to schedule an inspection.
We repair LiftMaster, Mighty Mule, FAAC, Elite, BFT, Linear, Viking, Ghost Controls, and DoorKing. If your Washington Park gate runs a no-name secondhand opener, we can usually identify the compatible board and remote and get it working. Estimates are always free.
Call (855) 360-5306 now for a free estimate on electric gate repair in Washington Park. We quote the price before we start, and the invoice matches the quote. Nelson Arrieta and the Archway Gate Repair team are ready to get your gate working today.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Washington Park and the surrounding Broward County communities.