Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across West Park
Electric gate repair in West Park typically costs $180 to $480 for most service calls, with motor replacements running $450 to $1,100 depending on the operator brand. We’re usually on-site within 24 to 48 hours for non-emergency calls, and we carry parts for the brands already installed across 33023. If your gate is stuck, grinding, or refusing to open, call us at (855) 360-5306 and we’ll tell you what we think is wrong before we even roll the truck. We work on the brand already on your property.
Why Archway Gate Repair Is West Park’s Preferred Electric Gate Repair Company
West Park homeowners and property managers call us because we diagnose, we don’t guess. Our lead technician Nelson Arrieta has worked on gates across every block of this city, from the canal-front homes off SW 24th Street to the older ranch-style properties near Carver Ranches. When a LiftMaster slide operator starts struggling after a storm, we already know the likely cause before we arrive: it’s usually not the motor.
We’re a gate-only repair company. This matters in West Park because so much of the local housing stock carries legacy slide operators and older iron gates that general contractors don’t recognize. A handyman sees a gate that won’t move and quotes a replacement. We see a rusted limit switch, a corroded loop detector, or a post that’s settled in loose fill near a canal bank. Repair first, replace only when necessary.
Our Electric Gate Repair team responds to West Park calls with trucks stocked for the common local failures: salt-corroded wiring, wind-raked hinges, and control boards that trip after afternoon thunderstorms. Nelson has built our reputation in this exact area by fixing what others misdiagnose.
Styles & brands we work with
Gate Access Control in West Park
Gate Access Control in West Park means something specific here: keeping a gate working through hurricane season and the daily wear of salt air while making sure the right people still get in. We install, repair, and reprogram keypads, intercoms, loop detectors, and remote receivers on residential and commercial properties. A basic keypad replacement runs $150 to $350. A new loop detector, the thing that senses your car and opens the gate automatically, costs $200 to $450 installed.
Keypad and Remote Programming
We reprogram existing keypads and remotes when codes get lost or a tenant moves out. If your remote opens the gate only sometimes, the problem is usually a corroded receiver antenna or a dying capacitor in the opener, not the remote itself. We test the whole signal path from the remote to the board, then fix the actual point of failure.
Loop Detector and Safety Sensor Work
West Park’s saturated yards after an afternoon storm can compromise loop detector wiring that’s been in the ground for 15 years. We dig test holes at the loop corner, check wire insulation for salt intrusion, and replace only the failed section when possible. Safety edge and photocell replacement runs $120 to $280 per sensor.
Commercial Gate Operator in West Park
Commercial Gate Operator service in West Park covers slide and swing operators on apartment complexes, churches, warehouses, and small retail plazas throughout 33023. These units run hundreds of cycles a day, and they fail differently than residential operators: more heat on the control board, more wear on the drive chain, more stress on the limit switches. A commercial slide operator repair in West Park typically runs $350 to $850, depending on whether we’re rebuilding the existing unit or replacing a burned motor.
High-Cycle Operator Rebuilds
When a DoorKing or FAAC operator has been in service for years, we can often rebuild the drive train, replace limit cams, and re-tension the chain for less than half the cost of a new operator. We handle hydraulic operators too, including BFT and Viking units that most local contractors won’t touch.
Access Control Integration
We wire new keypads, card readers, and telephone-entry systems into existing gate operators on commercial properties. If your HOA gate needs a new access control board integrated with an older operator, we can do that without recommending a full replacement. The gate has to work first; the access system rides on top of it.
Trusted Brands We Service in West Park
We work on the gate system already sitting on your property. Our techs are factory-familiar with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In West Park specifically, we see a lot of older LiftMaster slide operators and Mighty Mule swing units on single-family homes, plus DoorKing and FAAC on commercial properties. Because our trucks carry common parts for these brands, we often complete the repair in one trip instead of ordering and coming back a week later.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in West Park Homes
- Post settling near canal banks. The 33023 lots that back onto retention swales and canals have loose fill under the gate posts. After heavy rain, posts shift and the track racks, which makes a slide gate bind or stall. We reset the post, correct the sag, and verify the footing before touching the operator.
- Rusted hinges and hardware. Salt-laden air eats zinc-plated hinges fast in West Park. A gate that drags on the ground is usually riding on rusted or worn hinges, not a failed motor. We replace with stainless hardware sized for the gate’s wind load.
- Corroded loop detector wiring. Intermittent gate opening, where it works sometimes and not others, is frequently a loop detector wire that’s been sitting in saturated soil for a decade. Salt intrusion into the insulation creates the exact same symptom pattern.
- Wind-raked solid infill gates. Solid panels catch hurricane wind load and twist the hinge post, which throws the operator out of alignment. We see this every storm season, and the fix is structural, not electrical.
Pricing for Electric Gate Repair in West Park, FL
Here’s what we charge in West Park’s market, stated plainly. A service call for diagnosis runs $75 to $125, and if you approve the repair, that amount rolls into the final invoice. Gate motor replacement runs $450 to $1,100 depending on whether you have a Mighty Mule swing arm or a LiftMaster slide unit. Control board replacement runs $250 to $600. Keypad or remote receiver replacement runs $150 to $350. Safety sensor replacement runs $120 to $280 per sensor. Post resetting or track realignment runs $250 to $600 depending on whether we’re pouring new concrete or just correcting sag.
The price we quote is the price you pay, agreed before any work starts. Call (855) 360-5306 for an exact quote on your gate. Estimates are free, and we’ll tell you honestly whether a repair makes sense or if replacement is the cheaper long-term move.
We Also Serve Cities Near West Park
Our Electric Gate Repair in West Park service area extends into the surrounding Broward communities. We regularly run calls to Andover, Carver Ranches, Miramar, and Hollywood. If your property sits right on the city line, call us and we’ll confirm which route gets us there fastest.
Serving West Park, FL — Our Local Coverage Area
We’re based in the West Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in West Park
Your gate posts have likely settled in saturated soil near a canal bank or retention swale, which racks the track and binds the gate. West Park’s afternoon storm cycle saturates the loose fill that many 33023 lots are built on, and older iron gates are especially prone to post shift. We reset the post, re-align the track, and usually have the gate running same day. Call (855) 360-5306 if it’s sticking now.
Most operators installed in West Park have a manual release lever or key on the operator housing, usually a red handle or a small plastic tool that detaches the drive from the gate. Once released, you can slide or push the gate by hand. We always verify that the manual release works during every repair call, because in a hurricane you need that gate openable when the power is out and you’re securing the property.
The operator is usually not the weak point. Solid infill panels catch wind load and transfer that force to the hinge post, and in West Park’s post-Andrew high-wind zone, an under-engineered post will rack long before a new operator fails. We inspect the post, the hinge welds, and the footing whenever we install or service a solid gate. A new motor doesn’t fix a post that’s already leaning.
The motor is trying to move a gate that’s physically bound, which means the problem is mechanical, not electrical. In West Park we see this when a post has settled, a hinge has rusted through, or a wheel has ground into a rut in the concrete. Continuing to run the operator against that resistance will burn out the motor. Call us before that happens, and we’ll diagnose the real cause at (855) 360-5306.
Yes. We rebuild and repair commercial slide and swing operators on apartment complexes, churches, plazas, and warehouse properties throughout 33023, including DoorKing, FAAC, BFT, and Viking units. We also wire keypads, card readers, and telephone-entry systems into existing operators. We work on the brand already on your property.
If your gate is down, grinding, or acting up, call Archway Gate Repair at (855) 360-5306. We’ll give you a straight diagnosis over the phone and a free estimate before any work begins. Serving West Park and the surrounding Broward communities with electric gate repair, gate motor work, access control, and commercial operator service.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving West Park and the surrounding Broward County area.