Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Dania Beach
Gate repair in Dania Beach costs $150 – $1,800 depending on the failure, and most jobs we handle are done same-day or next-day. The typical repair is an electric gate that won’t open, a sagging hinge post, or a rusted latch, and the fix usually runs $180 – $450. If you’re on a canal block in 33004, your gate is fighting salt air and saturated soil from day one, so the sooner we look at it, the cheaper the repair. Call (855) 360-5306 and we’ll be out to your Dania Beach property fast, diagnose the actual failure, and quote the price before any work starts.
We’re Archway Gate Repair, a gate-only shop led by Nelson Arrieta. We work on the brand already on your property, from the motor to the hinge. And because we’re based in Miami Gardens, we’re on Dania Beach streets constantly, not rolling in from another county.
Why Archway Gate Repair Is Dania Beach’s Preferred Gate Repair Company
Dania Beach property owners deal with a specific set of gate failures. Salt-laden ocean air chews through operator housings and hinge barrels. Saturated soil lets posts settle after every heavy summer rain. A general handyman who “does gates too” will guess at the cause. We diagnose it.
Nelson built Archway around one trade and one trade only. That means when we pull up to a property off Dania Beach Boulevard or Federal Highway, we’re not also thinking about a roof repair across town. Every job we take is a gate job. Homeowners, HOA board members, and commercial property managers in Dania Beach call us because we recognize their LiftMaster, FAAC, or Elite operator before we’ve even opened the control box.
Repair first, replace only when necessary. That’s how we operate. If a hinge post has settled, we don’t quote a whole new gate. We reset the post, correct the sag, and get your gate latching again. If the motor is genuinely shot, we’ll tell you straight and price the honest fix.
Styles & brands we work with
Commercial Gate Repair in Dania Beach
Commercial Gate Repair on Dania Beach properties, from the marina-side lots near the Intracoastal to the industrial corridors off Stirling Road, often means a slide gate that has stopped holding its limit settings or a keypad entry system that has corroded from the ground line up. These are access-control failures, not cosmetic problems. A delivery truck can’t wait, and a tenant who can’t get in at 6 a.m. is a phone call you don’t want. Nelson Arrieta and his team handle both the mechanical side and the electric side, so we’re not referring your motor problem to a third company.
Slide Gate Motors and Limit Switches
A commercial slide gate in Dania Beach runs dozens of cycles a day. Salt air works into the limit switch housing. Rust forms. The gate stops two feet short or overtravels and rams the end stop. We replace the limit assembly, reset the travel, and reset the safety loops. Most commercial slide gate repairs in Dania Beach run $350 – $900.
Keypad and Access Board Replacement
Condo associations around 33004 call us when a keypad has gone dead or an access board has taken on moisture. We bench-test the board first. If it’s a corroded terminal strip, we repair it. If the board is gone, we swap in a replacement compatible with your DoorKing or FAAC system. Typical cost: $220 – $650 including programming.
Iron Gate Repair in Dania Beach
Iron Gate Repair in Dania Beach usually comes down to one thing: the post is rusted from the ground line up. The 1950s and 60s CBS homes in 33004 were built with galvanized or thin-walled steel frames, and on canal-front lots the brackish water wicks straight up into the post. The gate sags. The latch stops catching. The panel looks fine, but the footings are shot. We cut out the failing footing, set a new galvanized post, and hang the gate true.
Hinge Post Replacement and Realignment
If your iron gate drags on the driveway concrete, the hinge post is almost always the cause, not the panel. We fix the post, not just the striker. That’s the difference between a repair that holds and a patch that fails again next storm season. Expect $280 – $680 depending on how deep the old footing runs.
Weld Repair and Rust Treatment
Pinholes and cracked picket welds are common on older iron gates in Dania Beach, especially along the bottom rail where irrigation spray keeps the steel damp. We grind out the rust, weld what’s structural, and treat the surface so the repair doesn’t fail in six months. Small weld repairs start around $150.
Trusted Brands We Service in Dania Beach
We’re factory-familiar with the gate systems Dania Beach already has installed. That’s LiftMaster, FAAC, Elite, Mighty Mule, plus BFT, Linear, Viking, Ghost Controls, and DoorKing. If your HOA spec’d an Elite slide gate operator or your home came with a Mighty Mule swing opener, we know the specific failure points of that unit before we arrive. Diagnosed, not guessed. That brand knowledge means fewer return trips and lower labor time on your invoice.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Dania Beach Homes
- Sagging gate panels from wind-loaded storm season. Solid infill iron and aluminum gates catch a lot of wind during June-to-November storms, and all that force lands on the hinge post. If your gate sags an inch after a squall line, the post has likely moved in saturated soil.
- Rusted operator housings and keypads. Salt air off the Intracoastal makes short work of unsealed steel housings. Keypads go first, then limit switches, then the board. We see it on canal blocks constantly.
- Latch misalignment after heavy rain. Saturated soil shifts post footings. A gate that latched perfectly in April won’t catch in September. We correct it at the post so it stays corrected.
- Manual release mechanisms seized shut. If a storm knocks out power and your gate won’t roll free, the quick-release is probably corroded. This is the single most dangerous failure we see, because the gate is now a barrier during a potential evacuation window.
Pricing for Gate Repair in Dania Beach, FL
A service call to Dania Beach runs $85 – $125. From there, the most common repairs fall into clear ranges. Hinge and post work: $280 – $680. Electric gate motor or control board replacement: $350 – $950. Keypad and access hardware: $220 – $650. Weld and rust repair: $150 – $400. Full operator replacement on a commercial slide gate: $1,200 – $1,800.
Every price is quoted and agreed before we touch anything. You will not get an invoice bigger than the number we gave you unless we find something we cannot see from the outside, and in that case we call you first and explain it in plain English. Free estimates are free. Call (855) 360-5306.
We Also Serve Cities Near Dania Beach
Our team covers Gate Repair across South Broward. In addition to Gate Repair in Dania Beach, we service properties in West Hollywood, Melrose Park, Hallandale Beach, and Pembroke Park. The same brands, the same repair-first standard, the same local response.
Serving Dania Beach, FL — Our Local Coverage Area
We’re based in the Dania Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Dania Beach
Every automatic gate has a manual release mechanism, usually a handle or lever on the operator itself or a keyed cylinder near the motor. In Dania Beach, those releases are often corroded from salt air, so do not force them. If there is tension on the gate from the wind, release it slowly and keep your body outside the swing path. Call us if the release is seized, because forcing a salt-locked mechanism can break the gearbox. Once power returns, (855) 360-5306 will get your gate cycling again.
Because brackish water and salt-laden air work from two directions. The soil around canal-adjacent blocks in 33004 stays damp year-round, and the airborne salt attacks the post at ground level. The result is a rust line right where the post enters the concrete, and that is exactly where Dania Beach gates fail. Inland posts rot from neglect. Intracoastal posts rot even when you maintain them.
Yes. We install solar gate openers with battery backup on Dania Beach properties specifically for this. When FPL goes down after a named storm, the gate cycles off the battery and recharges when the sun comes back. These systems run $900 – $1,600 installed and they are worth every dollar when the power is out and you still need to get a car out.
The simple test: with the gate open, break the safety loop or photo eye with something solid, then activate the close cycle. The gate should stop and reverse immediately. On lift-away slide gates, the motor should not run at all. If your gate doesn’t respond that way, the safety circuit has failed or been bypassed. A gate that does not reverse on contact or obstruction is a genuine hazard, especially around children and pets. Call us for a full safety check.
Limit switch corrosion. The constant salt air works into the switch housing, contacts pit out, and the gate either stops too soon or overtravels the end stop. The fix is usually a $350 – $700 limit assembly replacement and a full re-set of travel stops. Most Dania Beach commercial slide gate failures are not the motor, they are the small components the motor depends on.
If your gate is sagging, seized, or refusing to cycle on a canal block in 33004, call Nelson Arrieta and the team at Archway Gate Repair. We will diagnose the actual failure, quote the price before we start, and get your gate working again. (855) 360-5306.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Dania Beach and South Broward’s gate repair needs as a gate-only specialist.