Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Delray Beach
Gate repair in Delray Beach usually means one of two jobs: a legacy 1980s or 90s automatic operator that finally quit west of I-95, or a wrought-iron pedestrian gate dragging on settled posts near Atlantic Avenue. We handle both, plus everything in between. Our Delray Beach customers call when a gate won’t open, won’t close, grinds, sags, or simply stopped responding to the remote. Call (855) 360-5306 and you’ll reach a gate specialist, not a dispatcher reading a script. We work on the brand already on your property.
Why Archway Gate Repair Is Delray Beach’s Preferred Gate Repair Company
Archway Gate Repair is a gate-only shop. We don’t do fences on the side, we don’t do garage doors, and we don’t send a general handyman to diagnose a LiftMaster swing operator. Every job we take in Delray Beach is a gate job. That focus means our technicians recognize failure patterns by brand before they even open the control box. Property managers in gated communities off Hagen Ranch Road and Jog Road know us because we retrofit operators into legacy tracks instead of pushing full replacements. Homeowners in the historic districts off Swinton Avenue and around Old School Square know us because we re-plumb and re-hang settled pedestrian gates rather than cranking hinges and hoping. Nelson Arrieta runs our shop with a repair-first rule: diagnose, quote, then fix. No replacement pitch unless the gate actually needs it.
Styles & brands we work with
Metal Gate Repair in Delray Beach
Metal Gate Repair in Delray Beach means working with aluminum, wrought iron, and steel gates that face two very different environments. West of I-95, in gated communities where driveway slide and swing gates date to the 1980s and 90s, the metal itself is usually fine. The operator, control board, and gearbox are the moving parts that fail. Near the beach in 33483, salt-laden onshore breezes attack the gate’s fasteners, hinges, and operator housings, so we replace hardware with corrosion-resistant components. A typical metal gate repair in Delray Beach runs $180 to $450 for hinge, latch, and alignment work, while operator retrofits on legacy metal gates fall between $1,200 and $2,800 depending on the brand and track condition.
Hinge and Post Repair on Wrought-Iron Gates
Historic-district pedestrian gates near Atlantic Avenue often bind because the original concrete or masonry hinge posts have shifted in the sandy soil. Cranking the hinges doesn’t fix that. We re-plumb the gate panel, reset or re-core the post anchors, and re-hang the leaf so it swings true. This is one of the most common jobs we do in Delray Beach’s older neighborhoods.
Welding, Rust Repair, and Realignment
Beachside properties in 33483 and Intracoastal-adjacent homes see rust on hinges, weld points, and bottom rails within a few years of installation. We cut out corroded sections, weld in new material, grind and refinish, and repaint with marine-grade coatings. If a gate has dropped or is dragging on the latch side, we realign the leaf and adjust the hinge barrels before any operator work.
Wood Gate Repair in Delray Beach
Wood Gate Repair in Delray Beach deals with humidity, termites, and post rot. A wood driveway gate in a lot off Federal Highway or a cedar pedestrian gate in a community off Linton Boulevard absorbs moisture year-round, and when the post rots at the base, the gate sags and the latch stops lining up. In the gated country-club communities west of I-95, original wood gates often carry automatic operators, so a rotten post can also cause rack-and-pinion binding and burn out the operator motor. Plan for $140 to $380 for post stabilization and hinge replacement, while a full wood gate rebuild in Delray Beach typically runs $500 to $1,600 depending on size and hardware.
Post Replacement and Rot Repair
We replace rotted posts with pressure-treated or steel-core alternatives, set them below-grade in concrete, and re-hang the gate on fresh hinges. The goal is to give the operator a stable platform so it isn’t fighting the weight of the gate. If a wood gate in an automated community has started grinding, we check the post before touching the operator.
Warped Panel Straightening and Re-Hinging
Wood gates warp in Delray Beach’s humidity. A panel that has bowed or twisted will drag on the driveway or refuse to meet the latch. We can often straighten the frame with tension hardware and re-hang the panel, which preserves the gate’s original look. When the wood is too far gone, we say so and give you an honest quote for rebuilding it.
Trusted Brands We Service in Delray Beach
We’re factory-familiar with nine major gate brands, including LiftMaster, FAAC, BFT, DoorKing, Elite, and Mighty Mule. That matters in Delray Beach because so many of the 1980s and 90s gated-community driveway gates run on LiftMaster, FAAC, or BFT operators whose control boards are now obsolete. We know those boards, we know which modern equivalents drop into the same footprint, and we know which gearboxes share mounting patterns with legacy units. We keep common retrofit parts for these brands ready for Delray Beach service calls, which shortens the time between diagnosis and repair.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Delray Beach Homes
- Dead 1980s and 90s slide operators west of I-95. Original operators in gated communities around 33484 and 33446 fail most often at the control board or gearbox. We retrofit modern LiftMaster, FAAC, or BFT operators into the existing track and posts instead of tearing out the gate.
- Dragging wrought-iron gates near Atlantic Avenue. Settled masonry and concrete hinge posts in the sandy soil cause these gates to bind. Hinge adjustment alone never fixes it because the post itself has moved. We re-plumb and re-hang the gate.
- Salt corrosion on gates in 33483. Beachside properties on A1A and Intracoastal-adjacent homes see fast rust on hinges, fasteners, and operator housings. We swap in stainless and marine-grade hardware and coat exposed metal before it fails mid-storm.
- Safety sensor and photo-eye failures on older automated gates. Pre-2000 installations around Delray Beach often lack the reversing edges and photo-eyes required today. We bring older gates up to current safety standards while we repair them.
Pricing for Gate Repair in Delray Beach, FL
Delray Beach gate repair pricing breaks down by the job. Hinge, latch, and alignment repairs run $180 to $450. Post replacement on a wood or metal pedestrian gate runs $250 to $600. Retrofitting a modern operator into a legacy track runs $1,200 to $2,800. Full gate replacement starts around $2,500 for a standard driveway swing gate and climbs from there with automation and access control. The price we quote is the price you pay; we agree on the number before any work starts. Call (855) 360-5306 for a free estimate. Nelson Arrieta and our Delray Beach service team are happy to walk through options over the phone and schedule a site visit.
We Also Serve Cities Near Delray Beach
Our Gate Repair team covers the communities around Delray Beach, including Kings Point, Highland Beach, Villages of Oriole, and Boynton Beach. If you’re just outside our core Delray Beach ZIPs, call us anyway. We’re familiar with the gate systems in all these neighborhoods and can bring the same brand-specific diagnostics to your property.
Serving Delray Beach, FL — Our Local Coverage Area
We’re based in the Delray Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Delray Beach
Because the concrete or masonry post the gate hangs from has shifted in Delray Beach’s sandy soil. Adjusting the hinges changes the gate’s position on the post, but the post itself has moved, so the gate still drags or binds. The permanent fix is re-plumbing the post and re-hanging the gate panel. Call (855) 360-5306 and we’ll assess the post movement and quote the repair.
Salt. Gates on A1A and Intracoastal-adjacent properties in 33483 corrode faster than anywhere else in Delray Beach. Hinges, fasteners, operator housings, and welded seams all fail early unless they’re made of stainless, marine-grade, or coated materials. We use corrosion-resistant components on beachside gate repairs and inspect the operator enclosure for salt ingress during every service call. Call (855) 360-5306 if your beachside gate is showing rust or operator fatigue.
Not necessarily. An operator repair gets the gate opening and closing again, but Delray Beach is in a hurricane zone, and the gate’s hinges, latches, anchors, and wind-rated hardware matter at least as much as the motor. We check all of those when we service a gate in Delray Beach, especially in the gated communities where a failed gate means a compromised perimeter. If you want a storm-readiness inspection alongside your repair, just ask when you call (855) 360-5306.
We dispatch to Delray Beach weekdays, and we prioritize a gate that won’t open at all or a gate stuck open overnight. Property managers in gated communities call us because a stuck-open gate is a security problem, not just an inconvenience. For urgent repairs, call (855) 360-5306 early in the day and we’ll work with you on the soonest available window.
A full replacement in Delray Beach includes removal and disposal of the old gate and operator, new gate fabrication or supply, new posts and hinges, motor and control board installation, safety edges and photo-eyes, and final adjustment. Most full replacements run $2,500 to $7,500 for residential driveway gates, and higher for commercial gates with access control. We’ll give you the number in writing before any work begins. Call (855) 360-5306 for a detailed quote.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Delray Beach and surrounding communities.