Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Lighthouse Point
If your gate in Lighthouse Point has stopped opening, started grinding, or seized up entirely after the last king tide, we can get it running again. Most Lighthouse Point repair calls we handle are diagnosed and fixed in a single visit, and we answer the phone at (855) 360-5306 with a real person who knows gates. Our techs work on the brand already on your property, which matters here because Lighthouse Point’s salt-air lots are hard on LiftMaster, FAAC, and BFT operators. Diagnosed, not guessed: we’d rather spend twenty minutes finding the actual fault than replace parts on a hunch.
Lighthouse Point sits on a finger of land between the Intracoastal and a web of saltwater canals. That’s wonderful for boating and brutal on gate hardware. We keep marine-grade stainless components and sealed operators on the truck as standard stock when we head your way, because standard inland hardware doesn’t survive a full season on a canal-front lot. Whether your gate guards a driveway off NE 31st Court or a side yard off Lighthouse Drive, the salt is already working on it.
Why Archway Gate Repair Is Lighthouse Point’s Preferred Gate Repair Company
We’re a gate-only specialist, not a general handyman who also happens to look at fences. That focus shows up fast in Lighthouse Point. When a homeowner near Sample Road calls about a LiftMaster slide operator that whines but won’t move, we already know the likely failure points before we pull into the driveway for LiftMaster repair in Lighthouse Point. Same with FAAC swing systems on the wider lots near Lighthouse Point Marina and BFT control boards on the homes west of Federal Highway. Brand familiarity means less trial-and-error, fewer unnecessary parts, and a repair bill that reflects the actual fix rather than a parts cannon.
Our lead technician Nelson Arrieta has spent years working on gate systems in South Florida’s coastal communities, and he built Archway around a simple principle: repair first, replace only when necessary. That philosophy matters in Lighthouse Point, where a corroded hinge or a salt-damaged control board is often repairable for a few hundred dollars when a replacement quote would run into the thousands. We quote the repair, get your approval, and do the work. No surprise invoices after the fact.
Styles & brands we work with
Driveway Gate Repair in Lighthouse Point
Driveway Gate Repair in Lighthouse Point usually means a salt-exposed slide or swing gate that has stopped mid-travel, a gate dragging on its track, or an operator that hums but won’t engage. Most Lighthouse Point driveways are tight by Broward standards, especially on canal-front lots where the side setback leaves just a few feet between the house and the water. That makes slide gates the default on many shared driveways and rights of way, and slide gates demand precise rack and pinion alignment. A quarter-inch of pinion slop at the motor will bind the gate on the far end, and in Lighthouse Point the salt corrosion accelerates that wear. Typical driveway gate repair here runs $180 to $450 depending on whether we’re realigning rack and pinion, replacing a hinge post, or swapping a seized operator.
Slide Gate Realignment on Tight Lots
On a canal-front property near Lighthouse Point Marina, we repaired a LiftMaster slide gate operator that had seized from salt corrosion after a king tide. The rack and pinion were rusted solid, and the hinge post had shifted. We replaced the operator with a sealed unit, installed stainless steel hinges, and corrected the post footing, restoring smooth operation despite the restricted working space between the house and the dock. That’s the kind of job we do regularly in Lighthouse Point, and it’s why we keep stainless hardware stocked instead of special-ordering it.
Operator and Motor Replacement
When an operator has been breathing salt air for three or four years, the motor windings and control board both take damage. Sealed operators last meaningfully longer on Lighthouse Point waterfront lots than standard units. If your gate opens halfway and reverses, or the motor runs but the gate doesn’t move, the next step is usually a diagnostic visit. We’ll test the board, the limit switches, and the drive train, then quote you a repair price before any work starts.
Gate Welding in Lighthouse Point
Gate Welding in Lighthouse Point is frequently about corrosion repair rather than fabrication from scratch. Salt-laden air off the Intracoastal works into the bottom rail and hinge side of steel and aluminum gates, and once a weld starts to rust, the structural integrity goes with it. We weld cracked gate frames, re-weld hinge plates that have torn from the post, and reinforce corners on older slide gates that were fabricated with lighter gauge steel than the salt environment can tolerate. Most weld repair jobs in Lighthouse Point run $220 to $600, with heavier structural repair or new hinge fabrication at the upper end. You’ll know the price before we strike an arc.
Corroded Frame and Hinge Reinforcement
The classic Lighthouse Point failure is a hinge plate that has rusted at the weld line where it meets the gate frame. The gate still hangs, but it sags, and the operator fights the added friction every cycle. We cut out the failed weld, grind back to clean metal, and re-weld with a heavier plate where needed. Where the original fabricator didn’t add gussets at the corners, we add them on the weld-up to keep the frame square for years instead of months.
Post Footing and Anchor Repair
Storm surge and saturated ground after heavy rain both undermine gate posts on Lighthouse Point lots. A post that has shifted even an inch changes the entire gate geometry, putting strain on the hinges and the operator. We reset posts in properly cured concrete, correct the level and plumb, and then re-align the gate so it travels freely again. If the post has corroded through at the base, we’ll quote a replacement post and weld it in place.
Trusted Brands We Service in Lighthouse Point
Archway Gate Repair works on the brand already on your property. Our techs are factory-familiar with nine major gate brands, and in Lighthouse Point the ones we see most often are LiftMaster, FAAC, and BFT on residential slide and swing installations, with occasional Linear equipment on older automatic systems. Knowing each brand’s specific failure points lets us diagnose faster and avoid ordering unnecessary parts. For Lighthouse Point customers, we keep the most common sealed operators, stainless hinges, safety photocells, and control board replacements stocked so same-week repair is realistic on most calls. If your gate came with the house and you’re not sure what brand it is, tell us what the motor housing looks like and we’ll usually identify it over the phone at (855) 360-5306.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Lighthouse Point Homes
- Salt-seized operators and hinges. Canal-front and Intracoastal lots in Lighthouse Point expose gate hardware to salt-laden air year-round, and a king tide or storm-surge event accelerates the damage dramatically. We regularly see operators that worked fine in April and seized solid by September.
- Shared driveway clearance issues. Many Lighthouse Point homes share a driveway or rights of way with a neighbor, leaving minimal space for a swing gate. Slide gates are the usual answer, but they need precise rack and pinion alignment and properly placed loop detectors to work reliably in tight setbacks.
- Corroded safety photocells and keypad entry. Hurricane-season flooding leaves salt residue on safety sensors and keypad circuits, which causes intermittent operation or complete failure. A gate that stops and reverses for no apparent reason is often a photocell that’s shorting internally from corrosion.
- Shifted posts from saturated ground. Lighthouse Point sits low and very close to the water table, so gate posts settle and shift after heavy rains or storm surge. A shifted post binds the gate, stresses the operator, and accelerates hinge wear until it’s corrected.
Pricing for Gate Repair in Lighthouse Point, FL
Gate repair in Lighthouse Point typically runs between $150 and $600 depending on what’s actually failed. A basic service call and realignment is at the lower end. Replacing a salt-corroded hinge set runs $180 to $350. A new sealed operator or control board replacement lands in the $400 to $900 range depending on the brand and model. Full gate welding repair of a corroded frame runs $220 to $600. We quote the full price before any work begins, and you approve it in writing. Estimates are free, and there’s no charge just to come look at the job in Lighthouse Point. Call (855) 360-5306 for an exact quote on your gate.
We Also Serve Cities Near Lighthouse Point
Archway Gate Repair covers Lighthouse Point and the surrounding communities in northeast Broward. We take calls from Gate Repair in Lighthouse Point residents, plus Pompano Beach Highlands, Tedder, Kendall Green, and Hillsboro Beach. Our Gate Repair team knows how the salt-air conditions change from one canal-front block to the next, and we stage our trucks accordingly.
Serving Lighthouse Point, FL — Our Local Coverage Area
We’re based in the Lighthouse Point area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Lighthouse Point
Because Lighthouse Point’s homes sit directly on saltwater canals and the Intracoastal, so operators and hinges get a constant dose of salt-laden air that inland Broward gates never see. A standard gate operator that lasts eight years in Coral Springs might last three on a canal-front lot here. Sealed operators and marine-grade stainless hardware extend that lifespan meaningfully. If your operator has already seized or is acting up, call (855) 360-5306 and we’ll tell you whether it’s worth repairing or replacing.
Yes, and it’s one of the most common jobs we do in Lighthouse Point. Shared driveways and tight side setbacks usually mean a slide gate is already in place, and the repair is almost always about rack and pinion alignment, loop detector placement, or a corroded track. We reset the alignment, test the safety loops, and get the gate moving without taking any more of your side yard than the gate already uses.
If your gate sags at the latch side, scrapes the ground during travel, or doesn’t close squarely against the post, the hinge post has likely shifted or the hinge plate is rusting at the weld. On Lighthouse Point waterfront lots, we also look for rust staining running down the post from the hinge barrel. We repair or replace the hinge assembly and re-anchor the post if needed. Call (855) 360-5306 and we’ll assess it on site.
Every 60 days during the wet season, and more often if you’re within a few hundred feet of the Intracoastal or a canal. Salt residue from storm surge and king tides shorts out photocell circuits, and the first sign is usually a gate that stops and reverses when nothing is in the way. We test voltage and lens condition as part of any repair visit and can replace corroded photocells on the spot.
Yes. We weld corroded gate frames, hinge plates, and slide tracks, and we use marine-grade stainless or properly treated steel on Lighthouse Point repairs because inland-grade replacements won’t hold up. Most frame and hinge welding repairs are done in one visit, and the price is quoted and agreed before we begin. Call (855) 360-5306 for a free welding assessment.
Contact Archway Gate Repair
If your gate in Lighthouse Point won’t open, won’t close, or is grinding its way through every cycle, call us at (855) 360-5306 and we’ll schedule a free estimate. Nelson Arrieta and the Archway Gate Repair team serve Lighthouse Point homeowners, HOA managers, and commercial property owners with a repair-first approach and brand-specific expertise. The price is quoted and agreed before any work starts, and we’ll get your gate back online properly.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Lighthouse Point with gate repair, electric gate repair, and gate installation.