Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Ocean Ridge
Gate repair in Ocean Ridge usually comes down to one of three things: salt-air corrosion on hinges and operators, water intrusion in control boards after storms, or sagging gates hung decades ago on posts that were never meant for daily automated use. We fix all three, and we work on the brand already installed at your property. If your gate is stuck, grinding, or not responding to the keypad, call us at (855) 360-5306 and we’ll get a tech out to Ocean Ridge the same day in most cases. Our trucks are stocked for the failures we see most on the barrier island, so the first trip is usually the only trip.
Why Archway Gate Repair Is Ocean Ridge’s Preferred Gate Repair Company
Ocean Ridge is not Boynton Beach. The same gate that survives five years inland can fail in eighteen months a block off the Intracoastal. We know that because we work here constantly. Our techs understand which operators hold up to daily salt spray and which control boards are prone to water intrusion, because we have replaced enough of both to recognize the pattern before we even open the panel. Nelson Arrieta built Archway Gate Repair around one idea: diagnose the actual failure, not a guess. That matters in Ocean Ridge, where a corroded connection often looks like a dead motor to someone who does not work on gates every day.
Property owners here call us after other companies misdiagnose the problem or quote a full replacement on a gate that needs a $40 relay. We would rather repair your existing gate and keep it running than sell you a new one. When replacement is genuinely the cheaper long-term answer, we will tell you that too, straight. That reputation is why much of our work in Ocean Ridge comes from referrals along Ocean Boulevard and the side streets off A1A.
Styles & brands we work with
Iron Gate Repair in Ocean Ridge
Iron Gate Repair in Ocean Ridge means working with salt-corroded welded joints, rusted hinge barrels, and heavy custom-fabricated panels that were never powder-coated for a marine environment. Most iron gates in town are custom pieces, built by local fabricators decades ago, and they were not designed for the constant onshore spray that hits properties on the ocean side. What starts as surface rust on a hinge becomes a seized pivot within two years if left alone.
Hinge and Weld Restoration
We grind out the rot, re-weld the joint, and re-hang the gate so it swings clean. On pillar-mounted gates, we often discover the hinge post itself has shifted inside the masonry, which means the gate sags no matter how many times someone tightens the hinge bolts.
When Replacement Beats Another Patch
If the bottom rail is rusted through or multiple pickets have lost structural integrity, welding another patch is throwing money into a losing frame. We will show you the difference and give you an honest price either way.
Sliding Gate Repair in Ocean Ridge
Sliding Gate Repair in Ocean Ridge frequently comes down to two problems: rollers seized by salt corrosion and track channels packed with sand and debris blown in from the beach. A sliding gate that jerks, squeals, or stops midway is usually fighting the track. We service cantilever and V-track slides on estates throughout the 33435 area, including the walled properties set back from the road.
Track and Roller Service
We clean out the track, replace worn rollers and bearings, and realign the gate so the motor is not straining. A gate that fights the track burns through motors prematurely, and motor replacement costs far more than roller service.
Operator and Safety Loop Checks
On automated sliding gates, we test safety loops, photo eyes, and the operator’s torque settings. Many older systems in Ocean Ridge were installed before current UL 325 safety standards, and we can retrofit them without replacing the entire operator.
Trusted Brands We Service in Ocean Ridge
Archway Gate Repair works on the equipment already on your property, which in Ocean Ridge usually means LiftMaster, FAAC, or Elite operators, with plenty of Mighty Mule systems on older ranch-era homes replacing worn-out original openers. Because we carry factory-familiar parts for these brands on our trucks, we can often complete a repair on the first visit instead of ordering parts and returning a week later. For legacy boards no longer manufactured, we maintain relationships with suppliers who stock refurbished and new-old-stock parts. When a board is truly obsolete, we will tell you before you spend money on a repair that will fail again.
Common Gate Repair Problems We See in Ocean Ridge Homes
- Corroded keypads and control boxes on ocean-facing gates. Salt spray works its way into every seam and terminal. We see keypads that work intermittently for months before dying outright.
- Water-logged control boards after tropical storms. Even a near-miss storm can drive rain horizontally into boards mounted on the windward side of a pillar. Legacy LiftMaster and FAAC boards are especially vulnerable.
- Sagging hinge posts on older custom installations. Many original estate gates were hung on posts set with minimal footings. The pivot shifts, the gate drags, and the operator arm bends trying to compensate.
- Wind-load failures on gates not rated for hurricane exposure. Gates that survive Ida or Nicole often do so with bent pickets, cracked welds, and operators that worked far beyond their spec. We inspect for hidden damage after every major storm.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Ocean Ridge, FL
Most gate repairs in Ocean Ridge run between $225 and $650 depending on what failed. A corroded keypad replacement typically lands around $225 – $350 installed. Replacing a seized hinge or re-welding a broken joint runs $300 – $500 per hinge. A new control board for a LiftMaster or FAAC system usually costs $450 – $750 with labor. Full sliding gate track replacement and realignment falls in the $600 – $1,200 range on longer drives. Every quote is given up front and agreed to before we start work, so there are no surprises on the invoice. For an exact number on your gate, call (855) 360-5306 and we’ll give you a free estimate based on the actual equipment and damage.
We Also Serve Cities Near Ocean Ridge
Archway Gate Repair works throughout southern Palm Beach County. Beyond Ocean Ridge, our Gate Repair team regularly serves Boynton Beach, Atlantis, Hypoluxo, and Lantana. If you are just over the bridge or a few blocks south, the same crew and same stocked trucks will handle your gate.
Serving Ocean Ridge, FL — Our Local Coverage Area
We’re based in the Ocean Ridge area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Ocean Ridge
Because salt-laden rain and wind-driven spray force water into the enclosures, even ones rated for outdoor use. The fix is sealing the board and keypad with marine-grade gaskets and relocating the control box to the leeward side of the pillar where possible. Call (855) 360-5306 and we can inspect your setup before the next storm.
Most sagging gates can be repaired by rebuilding the hinge post footing and re-hanging the gate. If the gate frame itself is rusted through or the bottom rail has failed, replacement is the honest answer. We will show you exactly what we found and quote both options when it is close.
Yes. Town code reviews for replacement gates typically require wind-rated operators and positive stops, which is why many repairs here become code-upgrade retrofits. We handle the paperwork and installation so the replacement passes on the first inspection.
In most cases, yes. We can add photo eyes, safety edges, and audible alarms to legacy LiftMaster operators to bring them up to current UL 325 standards without replacing the entire unit. If the board is too old to accept these inputs, we will tell you and price a modern replacement.
Every six months for ocean-facing gates, and annually for properties on the Intracoastal or inland side of A1A. Salt corrosion moves fast here. A $200 service visit catches seized rollers and corroded terminals before they become a $600 board replacement. Call (855) 360-5306 to schedule one.
Call Archway Gate Repair for Your Ocean Ridge Gate
If your gate is stuck open, stuck closed, or making a sound it never made before, call us at (855) 360-5306. We will diagnose it, quote it, and fix it. From the motor to the hinge, we work on the gate you already have, we repair before we replace, and we will tell you the truth about what it costs. Estimates are free, and the price we quote is the price you pay.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Ocean Ridge and southern Palm Beach County.