Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Tamarac
Gate repair in Tamarac typically runs $180 – $520 depending on the job, with most hinge, alignment, and control board fixes completed the same week. Most calls we take in Tamarac come from homeowners and HOA property managers dealing with a gate that won’t open, a keypad that’s gone dark, or a sagging driveway gate that scrapes against the concrete. If you’re in Tamarac and your gate is acting up, call (855) 360-5306 and we’ll talk through what you’re seeing before anyone rolls a truck.
We work throughout Tamarac’s 33321 zip code, from the Kings Point communities off Nob Hill Road down through the residential streets off West McNab and Commercial Boulevard. We know the difference between a stand-alone villa driveway gate and a shared community entrance gate on a masonry wall. That matters because the repair approach, the parts, and the coordination with an HOA board all change depending on which one you’ve got.
Why Archway Gate Repair Is Tamarac’s Preferred Gate Repair Company
We’re a gate-only specialist, which means every call is handled by someone who has already diagnosed your exact brand and failure mode dozens of times before. In Tamarac, that brand is often LiftMaster, FAAC, or BFT on an original operator from the 1980s or 90s. We don’t send a general handyman to figure it out on your driveway. We send someone who can tell from your description whether it’s a dead battery, a water-damaged board, or a failing limit switch.
Our Gate Repair team handles everything from the motor to the hinge. In Tamarac we’ve built our reputation inside the 55+ communities, where residents want a gate that opens quietly, responds to the remote reliably, and doesn’t trap them outside after a thunderstorm. That’s not a high bar. It’s the minimum, and we clear it consistently.
Led by Nelson Arrieta, our technicians work on residential and commercial gate systems across Tamarac with the same repair-first approach: diagnose the actual fault, quote the fix honestly, and replace only what’s genuinely worn past saving.
Styles & brands we work with





Iron Gate Repair in Tamarac
Iron Gate Repair in Tamarac usually means one of three things: rusted-out hinge welds, sagging gate leaves that no longer align, or cracked posts that have shifted under Florida heat and hurricane-season wind loads. We see all three regularly in the villa and single-family ranch neighborhoods off Southgate Boulevard and Pine Island Road, where driveway gates were built decades ago and have lived in humidity and salt-laced air ever since.
Most iron gate repair work in Tamarac runs $200 – $480. A simple hinge replacement or weld repair is at the lower end. If the post has shifted and needs to be re-anchored or re-set in concrete, expect to pay toward the higher end. Every price is quoted and agreed to before work begins, so there’s no surprise on the invoice after the gate is swinging again.
Hinge and Post Repairs
When a hinge wears or the post drifts even a quarter inch, the gate leaf drags or binds. On older Tamarac properties the post footing is often shallow, poured before modern wind-load standards. We re-anchor the hinge post, replace barrel hinges or weld repairs as needed, and realign the leaf so it clears the driveway cleanly.
Rust and Corrosion Control
South Florida’s humidity and coastal air accelerate rust on steel gates faster than most homeowners expect. We grind back active corrosion, repair the affected section, and prime and paint so the repair doesn’t become next year’s problem. On gates with severe pitting through structural members, we’ll tell you straight if replacement is the honest fix.
Sliding Gate Repair in Tamarac
Sliding Gate Repair in Tamarac is common in shared community entrances and larger driveway setups, especially in HOA communities where the gate rides on a steel track or cantilever system. The dominant failure mode in this city is a gate that binds on the track because the footing has settled or vegetation debris has built up in the track channel.
Sliding gate repair here typically runs $250 – $520. Replacing worn rollers or clearing and re-leveling track is on the lower end. Repairing a motor, chain drive, or rack-and-pinion binding from post movement falls toward the top. We quote the job before touching tools, and that quote is the price.
Track, Roller, and Alignment Work
Sliding gates fail when the track drifts out of level or rollers wear oval. We remove the gate leaf, service or replace rollers, clean the track channel, and set the spacing so the gate moves without grinding. On cantilever systems we check the counterbalance adjustment and rack mesh so the motor isn’t fighting the gate on every cycle.
Motor and Limit Switch Diagnosis
If your sliding gate stops midway or reverses for no reason, the limit switch or motor capacitor is usually the culprit. In Tamarac, storm-driven power surges take out capacitors and control boards regularly. We diagnose rather than guess, test the motor amp draw, and replace only the failed component.
Trusted Brands We Service in Tamarac
We work on the brand already on your property. In Tamarac that’s often LiftMaster on community entrance gates, FAAC on 1990s swing operators, and BFT or Linear on newer installs. Because we’re factory-familiar with these systems, we can tell you before we arrive what the likely failure is and which parts we’ll need. That means fewer return trips and less labor time. We keep common boards, remotes, and safety sensors stocked for Tamarac customers, and parts we don’t carry locally are usually a two-day order away.
Common Gate Repair Problems We See in Tamarac Homes
- Dead backup batteries after storm outages. Most gate operators in Tamarac’s 55+ communities still run on original 1990s hardware. When FPL cuts power during a summer storm, the backup battery is the only thing between you and a gate that won’t open. In older systems, that battery is often years past its life. We replace it and test the charging circuit so it actually recharges for the next outage.
- Water-damaged control boards and keypads. Humidity and heavy rain find their way into operator housings and keypad enclosures in Tamarac more than in drier parts of Florida. When corrosion bridges contacts on the board or a keypad membrane fails, the gate either won’t respond or cycles erratically. We diagnose the board before replacing it, because sometimes the fix is a cleaned relay, not a $400 part.
- Sagging gates on aging posts. In Tamarac’s 1960s – 90s ranch and villa neighborhoods, driveway gates often hang on posts set before modern anchoring standards. Humidity softens the surrounding soil, and the post slowly leans. The gate then drags, the hinges twist, and the operator strains. Re-anchoring the post and re-hanging the gate is the permanent fix.
- HOA access-control failures at community entrances. Shared entry gates in Tamarac HOAs run on loop detectors, keypads, and sometimes phone-entry systems. When any of those fail, residents get stuck outside or the gate stays open and defeats the security. In many of the 55+ communities we coordinate directly with the board or property manager to get the repair approved and scheduled fast.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Tamarac, FL
Here’s what we see on the ground in Tamarac. Hinge and alignment work on a driveway gate typically runs $180 – $320. Iron gate rust repair and repainting runs $200 – $480 depending on how far the corrosion has spread. Sliding gate track, roller, and motor repairs range from $250 – $520. Control board replacement, including parts and labor, usually lands between $300 – $500 depending on the brand and board type. These are real ranges for this market, not national averages.
What pushes cost in Tamarac’s favor: our techs already know the failure patterns in this city’s housing stock. Faster diagnosis means less labor billed. And every job gets a written quote before we order parts or pick up a tool. Call (855) 360-5306 for a free estimate on your specific gate.
We Also Serve Cities Near Tamarac
Our service area extends beyond Tamarac to North Lauderdale, Palm Aire, Coral Springs, and Margate. If you manage properties across multiple Broward communities, one call covers the whole area. See our full coverage at Gate Repair in Tamarac for local details and scheduling.
Serving Tamarac, FL — Our Local Coverage Area
We’re based in the Tamarac area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Tamarac
Check the backup battery and the control board for water intrusion, in that order. In Tamarac’s older HOA communities like Kings Point, most operators still run on 1990s boards and batteries that haven’t been replaced in years. After a thunderstorm, a dead battery means the gate won’t move during a power cut, and a water-damaged board causes erratic cycling even when power is restored. Call us at (855) 360-5306 and we’ll test both and quote the exact fix before work starts.
The problem is almost always the post footing, not the hinge hardware. In Tamarac’s 1960s – 90s ranch and villa neighborhoods, gate posts were often set in shallow concrete before current wind-load standards, and humid soil allows the post to drift over time. Tightening hinge bolts realigns it temporarily, but if the post is leaning, the gate will sag again within weeks. The permanent fix is re-anchoring the post and re-hanging the gate leaf.
No, but we’ll help you get the approval moving. In Tamarac’s HOA communities, the gate is typically common property, so we coordinate directly with the board or property manager before doing any work. Once the board approves, we schedule fast and quote the repair in writing before starting. If you’re a resident, we can provide a diagnostic report for the board so the request isn’t a vague complaint, it’s a specific fault with a specific fix and price.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Tamarac, the most common operators we see are LiftMaster on community entrances, FAAC on 1990s swing gates, and BFT or Linear on newer installs. Because we’re factory-familiar with each brand’s boards, sensors, and motor specs, we don’t trial-and-error on your gate.
We test safety photocells and edge sensors on every electric gate repair, and we follow UL 325 entrapment-safety requirements. For Tamarac’s 55+ communities, that’s critical: residents move slower, and a gate that reverses on contact or lacks a working photocell is a real hazard. We won’t leave a gate running that bypasses its safety devices. If an older system can’t meet current entrapment standards, we’ll tell you what needs to change and quote it plainly.
Get Your Tamarac Gate Fixed This Week
If your driveway gate is dragging, your community entrance gate is stuck open, or your keypad won’t respond, call (855) 360-5306. Nelson Arrieta and our Gate Repair team will talk through the symptoms, tell you what we think the fix is, and schedule a visit that fits your timeline. Estimates are free, prices are fixed before work starts, and the gate gets diagnosed, not guessed.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Tamarac and surrounding Broward County communities.