Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across West Gate
Gate repair in West Gate usually falls into two camps: a slide gate that’s jumped its track, or an electric operator that stopped responding after a storm. Most calls we run in the 33409 corridor are same-day or next-morning, because a gate stuck open on a commercial strip or a multifamily lot isn’t something you can sit on. We’re Archway Gate Repair, and we work on the brand already on your property. Call (855) 360-5306 and tell us what the gate is doing, or not doing, and we’ll tell you what it likely is before we roll a truck.
Why Archway Gate Repair Is West Gate’s Preferred Gate Repair Company
West Gate is a different kind of gate market. You won’t find many decorative HOA entry monuments here like you will west of Haverhill or in Wellington. What you’ll find are older swing and slide gates on modest residential lots, low-rise apartment buildings, and strip centers, most of them retrofitted years ago with an aftermarket opener. That’s exactly the kind of work we do daily.
Homeowners and property managers near Congress Avenue and along the mixed-use parcels off Belvedere Road call us because we diagnose, not guess. A property owner with an Elite operator that hums but won’t move gets a tech who knows that board’s failure patterns before he opens the cover. HOA managers coordinating a shared entry system don’t get bounced between a fencing company and an electrician. We handle the motor, the board, the hinge, the post, the photocell, all of it.
Nelson Arrieta leads the team. His approach is repair first, replace only when necessary. That matters in West Gate, where a lot of gate hardware is older but still worth saving with the right fix.
Styles & brands we work with





Metal Gate Repair in West Gate
Metal gate repair in West Gate is the bread-and-butter service here, because almost every gate on a 33409 parcel is steel or aluminum. The work usually involves cutting out and replacing a rusted bottom rail, re-welding a cracked hinge, straightening a bent picket, or realigning a slide gate that’s dragging on its rollers. Tight setbacks on older lots mean a swing gate that sags even a couple of inches starts scraping the driveway, so hinge and post work is common.
Expect $180 to $340 for typical hinge replacement or minor weld repair on a standard single swing gate. A badly rusted frame section or a full rack and pinion replacement on a slide gate runs higher, often $450 to $800. We quote the number before any torch gets lit.
Hinge and Post Repair
Sandy, high-water-table soil in West Gate shifts gate posts over time. A leaning post pulls the gate leaf down with it, which binds the hinges and stresses the welds. We excavate, re-set the post in concrete, and rehang the gate so it opens without dragging. We can usually save the existing gate panel.
Gate Realignment and Weld Repair
Slide gates here grind because posts heave and the rack and pinion fall out of line. We check gear engagement, roller wear, and the track level before welding anything, so the repair holds through the next wet season.
Wood Gate Repair in West Gate
Wood gate repair in West Gate tends to involve gates that have been around since the 1970s or 1980s, built from pressure-treated lumber and now fighting South Florida humidity and termites. The frame rots, the gate sags, and the latch stops lining up. We replace rotten stiles and rails, re-square the frame, and install adjustable anti-sag kits where the gate was never braced properly.
A standard wood gate sag repair or post replacement in West Gate generally runs $220 to $420. Full frame rebuilds on a wide driveway gate land between $500 and $900, depending on whether we’re reusing the existing pickets or fitting new cedar. Every price is agreed before we cut anything.
Frame Rebuilds and Anti-Sag Kits
The climate here turns untreated wood soft fast. If your gate has the classic sagging diagonal crack, we can often rebuild the frame in place rather than replace the gate. That’s the repair-first approach, and it keeps matching gates on the other side of the driveway looking right.
Trusted Brands We Service in West Gate
We’re factory-familiar with nine major gate brands, and in West Gate that usually means LiftMaster, Mighty Mule, and FAAC operators bolted to older gate frames. The techs know each system’s specific failure points, which is why diagnosis here is faster than it is with a generalist trying to learn your gate on the clock. We stock common boards, remotes, looper detectors, and safety edges locally, so turnaround for West Gate calls isn’t slowed by a parts order. If you’ve got an opener that’s clicking, humming, or dead after an afternoon lightning storm, our Gate Repair team can usually tell you what’s wrong over the phone.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in West Gate Homes
- Lightning-surge damage to access-control boards after summer squalls. The 33409 corridor gets hammered by afternoon storms, and we routinely find gates stuck open or cycling erratically after a nearby strike. Surge protectors on operators are often missing or undersized.
- Heaving posts from sandy, high-water-table soil. Posts set years ago lean gradually, which throws slide gates out of alignment and wears the rack and pinion unevenly. The fix is re-setting and levelling the footing, not just tightening bolts.
- Worn retrofitted aftermarket operators on tight driveways. Many West Gate gates were originally manual, with an opener added later. The geometry is rarely perfect, so operators work harder and wear out faster than they would on a new install.
- Swing gate bind and drag from narrow setbacks. Gates on older multifamily lots swing close to curbs and walkways. Even slight sag scrapes the ground and stresses hinges, so minor misalignment is worth catching early before it wrecks the post.
Pricing for Gate Repair in West Gate, FL
Basic hinge, latch, and realignment work in West Gate runs $180 to $340. Slide gate rack and pinion repairs land between $300 and $650 depending on gate weight and how far out of line the gear is. Access-control board replacement after a surge generally runs $275 to $550 for the part and labor, and we carry common boards to keep that same-week. You’ll get a firm number before any work starts, and estimates are free. Call (855) 360-5306 and we’ll give you a range that matches what the gate is actually doing.
We Also Serve Cities Near West Gate
Our team covers Gate Repair in West Gate and the surrounding Palm Beach County corridor, including West Palm Beach, Haverhill, Lake Belvedere Estates, and Plantation Mobile Home Park. If your property sits just outside West Gate proper, the same techs run those routes daily.
Serving West Gate, FL — Our Local Coverage Area
We’re based in the West Gate area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in West Gate
If the gate serves a shared entry, parking lot, or commercial parcel in West Gate, you generally need the property owner’s or management company’s approval before structural work starts, and architectural approval can apply if the gate face changes. We coordinate directly with management companies on shared residential entries and commercial strips. Call (855) 360-5306 and we’ll tell you what’s needed for your specific property.
In West Gate it’s usually one of two things: a post that’s heaved in the sandy, high-water-table soil and thrown the rack and pinion out of line, or a surge event that’s scrambled the operator. We replace surge-damaged boards and re-set post footings regularly after squalls move through the 33409 corridor.
First, secure the property and call us. A stuck-open gate that won’t respond to the remote or keypad usually means the access-control board or its surge protector took a hit, and the operator may still be powered on and dangerous to touch. Call (855) 360-5306 and we’ll walk you through how to cut power safely, then run the repair.
Usually yes. A sagging metal or wood gate in West Gate is commonly a hinge, post, or frame issue rather than a panel issue, and we repair before we recommend replacement. Rebuilding the frame, re-setting a post, or adding an anti-sag kit is almost always cheaper than a new gate and keeps the matching gate on the other side looking right.
Yes. Automatic gates in West Gate must have functioning entrapment protection, typically photocells and a reversing mechanism, to meet current UL 325 safety standards. If your gate hits an object and doesn’t reverse, stop using it and call us, that’s an urgent safety repair, not a tune-up.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving West Gate and the surrounding Palm Beach County corridor.