Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across White City
Gate repair in White City usually comes down to one of two things: a solar operator or charge controller that quit on a long driveway set far from the meter, or a heavy gate that’s sagging because its post shifted in sandy soil. We fix both, and we’re familiar with the long shell driveways and wider-than-standard entrances that define this stretch of St. Lucie County. When your gate won’t open at 7 a.m. and you need to get a truck out, you don’t want a handyman guessing at the control board. You want someone who already knows the system on your property. Call (855) 360-5306 and we’ll get a gate specialist to your property, from Midway Road down to the residential lanes off Kings Highway.
Why Archway Gate Repair Is White City’s Preferred Gate Repair Company
We’re a gate-only shop, and that focus matters in White City. Most of our work here is on the custom slide and swing gates that sit at the end of long, unpaved drives, running on solar because running conduit to the meter costs more than the operator itself. Nelson Arrieta built Archway around a repair-first approach, and the gate brands we see most often in White City are LiftMaster, FAAC, and Mighty Mule, with a good share of Elite operators on the larger estates and small commercial parcels along US-1.
We don’t send a general technician who might recognize your system. We send someone who already knows the failure points on your specific board before they pull through the gate. That means faster diagnosis, fewer return trips, and a fix that holds through the next storm season. White City customers call us because the first repair actually sticks, and because we tell them when a repair is smarter than a replacement, not the other way around.
Styles & brands we work with
Sliding Gate Repair in White City
Sliding Gate Repair in White City is the service we handle more than any other, because the typical property here isn’t a short suburban apron. It’s a long shell or unpaved drive off the US-1 corridor with a cantilever or rolling slide gate spanning anywhere from 14 to 24 feet. The gate itself is usually mechanically sound. What fails is the solar operator, the charge controller, or the battery bank that’s been quietly dying since last year’s storm season.
A typical sliding gate repair in White City runs $285 – $560 for operator, battery, and control board work. If the rack and pinion is stripped or the rail has shifted, expect $40 – $85 per replacement rack segment, plus the realignment labor. New solar operators and battery banks run higher, $900 – $2,400 installed, depending on gate length and panel size.
Sagging or Stuck Slide Gate on a Long Driveway
The most common call we get on slide gates off long drives isn’t a broken gate. It’s a dead battery bank or a charge controller that stopped telling the panel to recharge. The panel reads fine on the voltmeter while the batteries sit flat. We test the charge controller under load, replace the battery bank with sealed units, and re-verify the photocells before we leave.
LiftMaster, FAAC, and Mighty Mule Solar Operators
We work on the brand already on your property, and in White City that’s frequently a LiftMaster or Mighty Mule slide operator running off solar. FAAC shows up on a lot of the older custom installs. We keep common boards, battery trays, and safety loop parts stocked locally so a repair doesn’t wait on a week-long parts order.
Wrought Iron Gate Repair in White City
Wrought Iron Gate Repair in White City almost always starts the same way: the gate still swings, but it’s dragging or latching wrong because the hinge post has shifted in sandy soil. Heavy custom iron gates put a huge cantilever load on a post, and in White City that post is almost always set in sand rather than compacted clay. Over a few wet summers and a couple of tropical wind events, the post leans, the gate drops, and adjusting the hinges becomes a temporary patch, not a fix.
Wrought iron gate repair in White City typically runs $180 – $420 for hinge replacement, sag correction, and latch realignment. If we’re re-setting a post footing in concrete, budget $350 – $750 depending on gate weight and digging conditions. Weld and rust repair runs $85 – $120 per hour, and most rust repair plus re-paint touch-up on a standard double gate is a one-day job.
Hinge Post Shifting and Interior Gate Sag
We don’t just adjust the hinges and call it done. We check the post, and in sandy soil the post itself is usually the reason the gate keeps sagging. If the gate has dropped, we dig the footing, re-set the post with a proper concrete anchor, and correct the sag at the hinge line, not just at the latch.
Custom Iron Gates on Shell or Unpaved Drives
We fabricate and repair custom-width and custom-height iron gates that were built for a specific entrance, often wider than a standard 12-foot opening. You don’t replace a gate like that with an off-the-shelf panel. You fix the structure, match the existing metalwork, and re-hang it square.
Trusted Brands We Service in White City
We arrive knowing your system. Our gate repair team is factory-familiar with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, which covers most of the slide and swing operators installed in White City. That brand-specific knowledge means we diagnose from what each board actually does, not from trial and error, and it cuts labor time because we’re not reading a manual in your driveway. For White City customers we keep common Gate Repair parts, solar battery trays, and safety sensor stock on hand so a repair doesn’t wait on a parts order from out of state.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in White City Homes
- Solar gate opener batteries and charge controllers dying on lots set far from the meter. The operator quits while the slide gate itself is mechanically fine, and the panel still shows voltage while the battery bank is flat.
- Hinge posts shifting in sandy soil and letting heavy custom swing gates sag. White City soil drains fast, and after a heavy rain the footing can settle enough that a 400-pound iron gate drops a half inch at the latch.
- Salt-laden onshore air and year-round humidity corroding control boards, hinges, and operator housings. It’s worse closer to the coast, and it accelerates after every storm season when wind-driven salt spray gets into the enclosure.
- Storm-season wind loading racking wide, taller gates. A 16-foot custom iron gate that takes repeated gusts will twist at the hinge line unless the posts are anchored deep and the hardware is up to it.
Pricing for Gate Repair in White City, FL
You’ll know the price before we do the work, and it’s quoted and agreed before any repair begins. Most White City gate repairs fall between $180 and $560, with the biggest variable being whether the operator, the battery bank, or the gate structure itself is the problem. Solar operator and charge controller replacement runs $900 – $2,400 because the parts, install, and load-testing are all part of the job. Post re-setting and footing work runs $350 – $750 depending on gate weight and digging conditions. If a gate is older and the repair math doesn’t make sense, we’ll tell you that honestly and quote a replacement. Call (855) 360-5306 for a free estimate. We’ll come out to your property, diagnose the actual failure, and give you a written number before you commit to anything.
We Also Serve Cities Near White City
Archway Gate Repair covers White City and the surrounding area, including Indian River Estates, Fort Pierce South, Fort Pierce, and Fort Pierce North. If you’re on the edge of White City or just down the road, call us. Gate repair in White City is our local specialty, but we work throughout this part of St. Lucie County.
Serving White City, FL — Our Local Coverage Area
We’re based in the White City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in White City
In most cases, no. Most solar-operated gates in White City that go completely dead have a failed charge controller or a dead battery bank, not a structural gate problem. We test the panel, the controller under load, and the batteries, and we repair whatever actually failed rather than replacing the entire system. Call (855) 360-5306 and we’ll schedule a diagnostic at your property.
Because the hinge post is likely shifting in White City’s sandy soil. Adjusting the hinges compensates for the sag for a while, but if the post itself moved, the gate will sag again. We re-set the footing in concrete, re-anchor the post, and correct the sag at the hinge line so the fix lasts.
Yes, we work on custom-width gate systems every week in White City. Many entrances on the long shell drives are 14 to 24 feet, not the standard 10 or 12. We repair existing custom gates and can fabricate replacement sections that match your current metalwork and operator.
We do, and those are nine of the most common operator brands installed in White City and across Florida. We’re factory-familiar with each system, so diagnosis is faster and we aren’t learning your board on your dime. We stock common parts for these brands for faster turnaround. Call (855) 360-5306 and we’ll identify your operator and the repair scope.
Safety photocells are required. They detect a vehicle or person in the gate’s path and prevent the gate from closing on them, and a gate that runs without working photocells is a safety hazard. Keypad entry is not legally required, but it’s part of the access system and we repair and replace both. We re-verify all safety sensors as part of any gate repair before we call the job done.
If your gate is dead, sagging, or running erratically, call Archway Gate Repair at (855) 360-5306. We’ll schedule a free estimate, diagnose the actual failure, and give you a written price before any work begins.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving White City and St. Lucie County.