Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Wilton Manors
Gate repair in Wilton Manors usually means one of three things: a swing gate dragging the carport apron, an electric opener that stopped responding, or a rusted latch that no longer closes the way the city requires. Most jobs we handle in the 33305 run between $180 and $680, and we can usually reach a Wilton Manors home the same day you call. Our team knows these tight lots, the sandy soil, and the salt air that eats hardware faster here than almost anywhere else in Broward County. Call (855) 360-5306 and you’ll get a diagnosis from someone who works on gates every single day, not a general handyman guessing at the problem.
Nelson Arrieta leads our crews, and he’s built Archway Gate Repair around a repair-first approach. That matters in Wilton Manors because so many gate failures on these compact lots trace back to one specific weakness: the shared post between a driveway gate and a pool safety barrier. We’ll cover that in detail below.
Why Archway Gate Repair Is Wilton Manors’s Preferred Gate Repair Company
Wilton Manors homeowners keep calling us because we already know what their gate problem is before we unload the truck. When a swing gate sags on a 1950s concrete-block ranch off NE 26th Street, it’s almost never the panel. It’s the hinge post. Salt air has been working on that steel for sixty years, and the sandy soil beneath it doesn’t hold a footing the way clay would. A general contractor sees a bent gate. We see rust-weakened posts, a dropped hinge line, and likely a pool barrier that’s now out of code if that post is shared. That’s the difference between a quote for a new gate and a quote for the honest fix.
Our Gate Repair team covers the full ecosystem: manual gates, electric and automatic gates, hinge and post work, realignment, lock repair, and weld and rust repair. If the gate can be saved, we save it. If the operator has failed beyond reasonable repair, we’ll tell you straight and quote a replacement from a brand you already know. No pressure, no upselling, just a clear answer and a fixed price before any work starts.
We work on the brand already on your property. LiftMaster, FAAC, Mighty Mule, Elite, and the other major systems you’ll find on Wilton Manors homes are all familiar to our crews. That means faster diagnosis and less labor time on your invoice.
Styles & brands we work with
Wood Gate Repair in Wilton Manors
Wood Gate Repair in Wilton Manors usually means re-hanging a gate that’s dropped, replacing rotted stiles or pickets, or swapping out hinges that have seized from salt and humidity. In a typical Wilton Manors job, this runs between $180 and $460 depending on how much of the frame has rotted and whether the post itself needs re-setting. A gate that drags the carport apron isn’t necessarily ready for the dumpster. Often the wood is fine and the hardware failed.
Here’s how we approach wood gates on these lots.
Structural Assessment and Re-Hang
We start with the post, not the panel. On 1950s and 1960s bungalows along streets like NE 6th Ave, the post is often the original and the wood gate was hung on it decades ago. If the post is sound, we re-hang the gate with fresh hinges, adjust the reveal so it clears the carport apron, and test the swing at both full open and full closed. If the post is rust-weakened or rotted, we re-set it before doing anything else. Hanging a wood gate on a failing post just moves the sag to the new hinges within a season.
Rot Repair and Weather Sealing
Wilton Manors humidity means wood gates sweat. We see rot concentrated where pickets meet the bottom rail, because water pools there after every afternoon downpour. We cut out rotted sections, splice in matching stock where the gate is worth saving, and re-seal. If the rot has spread through the rail end to the mortise, replacement is the honest call. We’ll tell you that before you spend money on a patch that won’t last through hurricane season.
Driveway Gate Repair in Wilton Manors
Driveway Gate Repair in Wilton Manors almost always happens on a tight site. Driveways here open directly onto narrow streets, and many homes have carports converted from the original open bay. A swing gate that’s hung even half an inch off-plumb will drag the apron within months. Our repair work here typically runs $220 to $680, with the upper end covering electric operator replacement, post re-setting, and weld repair on the frame.
We fix the positioning problem first, then the hardware.
Swing Gate Realignment for Tight Clearances
When a driveway gate sags on a compact lot, the cause is usually the hinge post settling in sandy soil, not a bent frame. We re-set the post, shim it true, and re-hang the gate so it clears the carport apron through the full swing. We also check the gate’s arc against the property line. On narrow streets in Wilton Manors, a gate that swings past the setback can clip a parked car or block a neighbor’s right of way. That’s a call we flag before you get a code enforcement notice.
Operator and Track Repairs for Sliding Gates
Where a swing gate won’t fit, Wilton Manors homes use sliding driveway gates. The failure point on these is usually the rack and pinion drive or a track that’s packed with sand and debris. We clear the track, re-set the drive gear, and test the safety sensor alignment. If the operator itself has failed, we swap it for the same brand or a direct-compatible unit. You’ll get a fixed price before the new opener goes in.
Trusted Brands We Service in Wilton Manors
If your gate says LiftMaster, FAAC, Mighty Mule, or Elite on the opener, we already know its failure points. Wilton Manors homes tend to have one of those systems on an automatic driveway or pool gate, and our crews have taken each one apart many times. We carry common boards, sensors, receivers, and hinge sets on the truck, so a Wilton Manors call often turns into a same-visit fix. You don’t wait for a part to ship from a distributor while your gate sits open against the street. Come to us with the brand name and the symptom, and we’ll bring the fix.
Common Gate Repair Problems We See in Wilton Manors Homes
- Sagging hinge posts from rust and sandy soil. The post fails before the panel, and the gate drops and drags the carport apron. We re-set the footing and replace the corroded hardware.
- Pool gates that won’t self-latch. On small lots, the pool safety gate often shares a post with the driveway gate. When that post shifts, both gates fail, and the city code inspection becomes a real problem.
- Electric operators tripping after heavy rain. High water tables and salt air corrode control boards and trip sensors. We dry, clean, and re-seal connections, then replace what’s actually failed.
- Swing gates hung slightly off-plumb from day one. On tight Wilton Manors lots, original installations from years ago were sometimes set to avoid a fence or carport corner. That angle works fine for a while, then the gate starts dragging. We correct the geometry, not just the symptoms.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Wilton Manors, FL
Here’s what gate repair in Wilton Manors typically costs, with the caveat that every job gets a written quote before work begins.
- Hinge replacement and gate re-hang: $180 – $320
- Wood rot splice and re-seal: $220 – $460
- Post re-set in sandy soil (single gate post): $300 – $600
- Shared pool/driveway post re-set with code-compliant latching hardware: $450 – $780
- Electric operator replacement (parts and labor): $350 – $680
- Weld repair on steel gate frame: $150 – $400
What moves the price is the post condition, the operator brand, and whether the job touches a shared pool barrier. We quote all of that before we remove a single hinge. Call (855) 360-5306 for a free estimate, and you’ll have the number in writing before you decide anything.
We Also Serve Cities Near Wilton Manors
Besides Gate Repair in Wilton Manors, our crews cover the surrounding area regularly: Sunrise, North Andrews Gardens, Oakland Park, and Boulevard Gardens. If you’re a property manager with gates at multiple sites across these cities, we can handle them all under one schedule and one contact person.
Serving Wilton Manors, FL — Our Local Coverage Area
We’re based in the Wilton Manors area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Wilton Manors
Yes, and this is one of the most common jobs we handle in Wilton Manors. On compact lots, the pool safety barrier and the driveway gate frequently share a single post. When that post shifts or rusts, both gates fail: the driveway gate drags and the pool latch won’t self-close. We re-set the shared post first, then hang both gates on the corrected footing, and verify the pool latch meets Wilton Manors code for self-latching and height. The job usually runs $450 – $780 when the shared post needs re-setting. Call (855) 360-5306 and we’ll tell you what your post actually needs.
Because the problem is the hinge post, not the panel. In Wilton Manors, salt air corrodes the post below ground level, and the sandy soil lets the footing settle unevenly over time. The gate sags and drags even though the frame is straight. We fix this by exposing the post, re-setting the footing, and replacing the corroded hinges. Hanging a new gate on the old post would just repeat the problem within a year or two.
Often yes, but it has to be hung correctly. On narrow Wilton Manors lots, a swing gate needs proper reveal and a clean arc that stays inside the property line. If the current gate is dragging, it’s almost certainly hung off-plumb or set on a failing post. We can assess your clearance and tell you whether the existing gate can be saved or whether a sliding gate makes more sense for the site. The assessment is free. Call (855) 360-5306 and we’ll measure it.
Usually not for long. Our crews keep the driveway passable during most repairs by working in stages and scheduling the brief disconnections around your coming and going. On a recent job off NE 6th Ave in the 33305, we pulled a 1950s ranch’s sagging swing gate and kept the carport accessible while the post footing was re-set. The homeowner drove through the whole time. We’ll tell you before we start what the access plan is and when you’ll have full use back.
Yes, automatic gates in Wilton Manors are required to have operational safety sensors that stop and reverse the gate when something is in the path. The easiest test: block the gate with an object in its path while it’s closing. It should stop and reverse immediately. If it doesn’t, the sensors are misaligned or dead. We test every sensor after every repair, and we won’t leave a gate running without working safety entrapment protection. It’s a code requirement, and more importantly, it’s the difference between a gate and a hazard.
Call Archway Gate Repair for Wilton Manors Gate Service
If you’re in Wilton Manors and your gate is dragging, stuck, or failing to latch, call (855) 360-5306. Nelson Arrieta and our crews know these lots, these posts, and these gates. You’ll get a straight answer, a written quote, and a fix that holds up to salt air and hurricane season. Free estimates, no dispatch fee, and the price is agreed before any work starts.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Wilton Manors and Broward County.