Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Gateway, FL
Gate installation in Gateway, FL typically runs $3,200 to $8,800 for a complete automatic driveway gate, depending on the operator brand, gate length, and whether you need a new power run. Most of the work we do here is in 1990s and 2000s Mediterranean-revival communities, where association approval and matching the neighborhood’s existing gate style matter as much as the hardware itself. Archway Gate Repair has served Gateway since 2011, and we know the specific failure points and HOA realities that shape every job in this corner of Fort Myers. Call (855) 360-5306 for a free estimate.
Why Gateway Homes Are Different
Gateway is a master-planned, gated-community suburb built almost entirely around HOA-governed entrance gates, community pool and recreation gates, and villa-style driveway gates. That changes the nature of the work. We’re not showing up to a rural five-acre parcel with a pipe-rail gate and a solar arm. We’re working in deed-restricted subdivisions where the association board approves the gate style, the property manager schedules the repair, and the gate has to match the forty other gates on the same street.
Southwest Florida’s humid subtropical climate adds a second layer. Heavy summer afternoon thunderstorms bring lightning and power surges that take out control boards and operators in clusters. Salt-laden air from the Gulf corrodes keypads, hinges, and motor housings year-round. We routinely find rusted limit switches and keypad faces after just a few years in service. In Gateway specifically, it’s common to see several entrance gates in the same development fail within a week of a bad storm, because they share the same power feed and the same original 1990s-era operator hardware.
The housing stock here, predominantly 1990s and 2000s single-family homes, villas, and townhomes, means the original gate equipment is now twenty to thirty years old. Control boards are obsolete, swing arm brackets are fatigued, and many operators were never sized for daily use by a full subdivision. That’s the job we walk into most often.
Styles & brands we work with
Our Main Gateway Services
Gateway homeowners and association boards call us for two things most often: getting a failed gate moving again, and getting an electric gate system back online after a storm or years of wear. Both are covered under one roof.
Gate Repair in Gateway
When a gate stops opening or closes halfway and reverses, the cause is usually mechanical: a bent hinge, a snapped weld on a swing arm, a wheel that’s ground itself flat on a sliding track. In Gateway, salt corrosion accelerates every one of those failures, especially on hardware that faces the street. We diagnose the specific failure point rather than guessing, and we repair before we recommend replacement. Full details on what a repair visit covers are on our dedicated Gate Repair in Gateway page.
Electric Gate Repair in Gateway
Electric gate problems in Gateway are disproportionately storm-related. Lightning strikes and power surges kill control boards, fry safety sensor wiring, and scramble keypad programming. We also see motor capacitor failures from years of high-humidity operation and intermittent stop issues caused by corroded photo eye connections. This is a core specialty for us, not an add-on. The motors, boards, loops, and wiring are all in scope. Details on diagnosis and same-visit repair are on the Electric Gate Repair in Gateway page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Gateway
New gate installation in Gateway usually means replacing a 25-year-old association gate or upgrading a manual driveway gate to an automatic system. The local reality: HOA approval is required in nearly every community here, and the new gate has to match the subdivision’s approved style, material, and operator type. Getting that right before the first hole is dug saves a board rejection and a re-order. We handle the full job from measure to programming, and we explain the options for Gate Installation so you know exactly what you’re paying for before work begins.
Automatic Gate Installation
Signs you need it
You’re still getting out of the car to open the gate by hand, or a property manager is fielding complaints that the old opener fails every time it rains.
What it costs in Gateway
A full automatic gate system in Gateway, including operator, arm or slide track, safety edges, and a basic keypad, typically runs $4,200 to $7,600 installed.
How we do it
We measure the opening, confirm swing or slide direction and clearance, run a new power feed if needed, then mount the operator, weld or bolt the hardware, install safety edges and photo eyes, and program the limit settings and remotes.
Driveway Gate Installation
Signs you need it
The current driveway gate is bent, rusted through at the hinge, or doesn’t close square anymore and the board won’t approve another patch job.
What it costs in Gateway
A new residential driveway gate in Gateway, whether swing or slide, typically starts at $3,200 and runs up to $6,900 depending on length, material, and whether an operator is already in place.
How we do it
We pull the old gate, set new posts in concrete, hang the gate and check the reveal, then install or transfer the operator and set the open and close limits so the gate stops firmly without slamming.
Sliding Gate Installation
Signs you need it
Your community needs a slide gate because the driveway has no room for a swinging panel, or the existing slide gate regularly jumps the track and gets stuck open.
What it costs in Gateway
A cantilever or roller slide gate in Gateway runs $4,800 to $8,800 installed, with the higher end covering longer commercial openings and heavy-duty operators like BFT or Viking models.
How we do it
We lay the track or set the cantilever posts, install the gate on rollers, mount the rack and pinion or chain drive, wire the operator, and adjust the travel and speed so the gate moves cleanly through the full opening.
What Gate Installation Costs in Gateway
| Item | Typical range in Gateway |
|---|---|
| Manual driveway gate replacement | $1,200 – $3,000 |
| Automatic driveway gate package | $3,200 – $6,900 |
| Full automatic system with new power run | $4,200 – $7,600 |
Does an HOA need to approve a new gate in Gateway?
Yes, nearly every community in Gateway requires architectural review board approval before a new driveway or entrance gate is installed. We provide the gate specs and operator details the board asks for, and we don’t start work until you have written approval.
How long does a gate installation take in Gateway?
Most residential driveway gate installations take one to two days. A full entrance gate replacement with new power, safety loops, and reprogramming can take three to five days, depending on the opening length and whether concrete work is needed.
Brands We Service in Gateway
We’re factory-familiar with the operators already installed across Gateway’s communities. BFT, Linear, Viking, and Ghost Controls are the brands we see most often on 1990s and 2000s association gates, and we keep the common boards and remotes for these systems on the truck. That usually means one visit, not two. See the full brand list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Gateway, FL
| Service | Typical range in Gateway |
|---|---|
| Manual gate repair trip | $85 – $160 |
| Hinge or bracket replacement | $150 – $400 |
| Track or roller replacement | $180 – $450 |
| Gate won’t open or close | $180 – $420 |
| Electric gate diagnosis and control board replacement | $280 – $850 |
| Keypad, receiver, or remote programming | $95 – $250 |
| Operator motor replacement | $450 – $1,000 |
| Complete automatic gate replacement | $4,200 – $7,600 |
Prices in Gateway run toward the higher end of those ranges when we’re dealing with rust-seized hardware, storm surge damage to a control board, or an HOA entrance gate that has to be brought up to current code with new safety edges and photo eyes. You’ll always get the full price agreed before any work starts.
Neighborhoods We Serve in Gateway
We cover all of Gateway’s gated communities, including the village subdivisions around Gateway Boulevard and the lakes. Typical response time for service calls in the 33973 area is same day or next morning, depending on call volume.
- The Plantation
- Hampton Park
- Pelican Preserve
- Catalina Isles
- Stoneybrook
Service Area – Cities Near Gateway
Beyond Gateway, we regularly work across the greater Fort Myers area. If your community is a few miles north or east, call (855) 360-5306 and we’ll confirm coverage. We also serve Lehigh Acres, FL, Buckingham, FL, Fort Myers Shores, FL, and Olga, FL.
Serving Gateway, FL — Our Local Coverage Area
We’re based in the Gateway area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Gateway
We answer calls from Gateway every day, and most emergency calls get a same-day visit or a next-morning arrival. Storm damage calls spike after afternoon thunderstorms, so a failed entrance gate after a lightning strike may be scheduled for the next morning if technicians are already on other surge-damage jobs.
Yes. A large share of our Gateway work is HOA and community-association repair and replacement. We quote in writing, provide the specs the architectural review board needs, and work with the property manager’s scheduling so entrance gates are offline for as little time as possible.
We match your community’s existing gate style, material, and operator brand wherever the board requires it. Because Gateway’s communities are deed-restricted, we confirm the approved spec with you before ordering, so the new gate doesn’t stand out from the twenty others on your street.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Gateway Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Chris Padgett"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Michelle Ackerman"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Veronica Mendoza