Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Kings Point, FL
Gate installation in Kings Point, FL runs between $2,800 and $9,500 for a complete automatic system, depending on gate length, operator type, and how much of the existing access-control wiring can be reused. Most jobs in this 55-plus community involve replacing perimeter or golf-cart gates that the HOA has already assessed and approved for work. Archway Gate Repair has served Kings Point since 2011, and we know that gate work here is rarely a one-owner decision – it’s board-reviewed, insurance-documented, and scheduled around a population that depends on those gates every single day. Call (855) 360-5306 for a free estimate on any Kings Point gate job.
Why Kings Point Homes Are Different
Kings Point is a large, age-restricted HOA community in western Delray Beach, ZIP 33484. The housing stock is almost entirely low-rise condo buildings and villas built from the 1970s into the 1990s, and the gates that matter most here are not individual driveway gates. They’re the common-area perimeter gates, golf-cart gates, and amenity-area gates controlled by the association. Board rules about vendor credentials, insurance certificates, and work scheduling shape every job we do.
The climate does its own damage. Subtropical sun, salt-laden humid air, and near-annual hurricane exposure corrode gate operators, hinges, and hardware faster than inland locations. Gate iron pits and seizes, operator chains rust, and after a storm the community’s gates become the choke point for emergency and service access. That’s why gate work in Kings Point leans on preventive lubrication, hinge and operator maintenance, and pre-season storm readiness rather than waiting for a failure. When a perimeter gate stops responding in this community, the board hears about it within minutes – so our diagnostic work has to be right the first time.
Styles & brands we work with
Our Main Kings Point Services
Most calls from Kings Point fall into two categories: a gate that won’t open or close reliably, and an electric gate system where the motor, board, or sensors have failed. Both are core specialties for Archway Gate Repair.
Gate Repair in Kings Point
Gate repair in Kings Point usually means a common-area gate that has jammed, sagged, or stopped latching after years of salt-air exposure. We work on the brand already on your property, which speeds diagnosis and avoids parts guesswork. From the motor to the hinge, we diagnose before we quote, and we repair first – replacement only when it’s genuinely necessary. Learn more about our Gate Repair in Kings Point services.
Electric Gate Repair in Kings Point
Electric gate repair is a core specialty, not an add-on. In Kings Point, we regularly see control boards fried by surge events, motors corroded by coastal humidity, and safety loops torn up after storm debris passes through. We handle motors, control boards, safety loops, and wiring on LiftMaster, FAAC, BFT, DoorKing, Elite, Mighty Mule, and more. Get the full breakdown on our Electric Gate Repair in Kings Point page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Kings Point
Gate installation in Kings Point is almost always a board-approved replacement of an aging common-area or golf-cart gate, often after years of patchwork repairs and corrosion have made continued fixes uneconomical. The 1970s-to-1990s housing stock means many original gates and operators are past their practical life, and salt-laden air has accelerated wear on every steel component. We install automatic gate systems that hold up to South Florida conditions and meet the association’s access-control requirements. See our full Gate Installation service details.
Automatic Gate Installation
Signs you need it
Your current gate needs repeated manual intervention, the operator trips its breaker, or the board has failed more than once in two years.
What it costs in Kings Point
Automatic gate installation in Kings Point typically runs $3,500 to $7,500 depending on gate length, operator type, and control wiring.
How we do it
We set the posts and gate, mount the operator, run control and power wiring, install the safety edges and photo eyes, then program and test limit settings and access devices.
Electric Gate Installation
Signs you need it
The motor runs but the gate barely moves, the opener is more than 15 years old, or repair quotes approach the cost of a new system.
What it costs in Kings Point
Electric gate installation in Kings Point generally runs $4,000 to $8,000 including the operator, control board, and safety equipment.
How we do it
We wire the operator to the board, install safety photo eyes at the gate path, set the gate travel and force limits, and test all access devices before we leave.
Driveway Gate Installation
Signs you need it
The existing gate leans, scrapes the ground, or no longer closes fully, leaving a security gap at the property line.
What it costs in Kings Point
Driveway gate installation in Kings Point typically runs $2,800 to $6,500 depending on gate style, width, and whether power must be run to the gate.
How we do it
We measure the opening, set the gate posts in concrete, hang and level the gate, and mount the opener with all required safety edges and photo sensors.
Sliding Gate Installation
Signs you need it
The existing sliding gate binds on its track, the wheels have worn flat, or the gate fails to open far enough for service vehicles.
What it costs in Kings Point
Sliding gate installation in Kings Point runs $4,500 to $9,500 for a complete system including track, cantilever hardware, and operator.
How we do it
We pour the track footing or set the cantilever posts, hang and square the gate, mount the operator and receiver loop, and tune the open and close speeds.
What Gate Installation Costs in Kings Point
| Item | Typical range in Kings Point |
|---|---|
| Driveway gate installation | $2,800 – $6,500 |
| Automatic gate installation | $3,500 – $7,500 |
| Electric gate installation | $4,000 – $8,000 |
Does an HOA in Kings Point require approval before gate installation?
Yes, Kings Point requires board or management approval before any common-area gate work begins, and approved vendors must carry current insurance certificates and worker’s comp. We provide our documentation directly to the property manager. Call (855) 360-5306 and we’ll help coordinate the paperwork.
Can you work around residents who depend on the gate daily?
Yes, we schedule common-area gate installation in Kings Point around peak arrival and departure times, and we stage work so the gate is never left inoperable overnight unless the board has authorized a full replacement window. Call (855) 360-5306 to talk through scheduling.
Brands We Service in Kings Point
We’re factory-familiar with the systems most common in Kings Point, including LiftMaster and FAAC operators, Mighty Mule motors, and Elite control boards. We stock common boards, photo eyes, hinges, and safety edges locally so most Kings Point repairs go out in one trip. See our brands for the full roster.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Kings Point, FL
| Service | Typical range in Kings Point |
|---|---|
| Gate repair service call | $89 – $149 |
| Electric gate diagnostic | $99 – $149 |
| Control board replacement | $450 – $1,200 |
| Gate opener motor replacement | $650 – $1,800 |
| Hinge replacement | $180 – $450 per hinge |
| Safety sensor replacement | $250 – $500 |
| Track and roller replacement | $350 – $900 |
| Driveway gate installation | $2,800 – $6,500 |
| Automatic gate installation | $3,500 – $7,500 |
| Electric gate installation | $4,000 – $8,000 |
Salt-air corrosion and older 1970s-to-1990s gate hardware push Kings Point prices toward the upper end of these ranges when components have fused or wiring has degraded beyond a simple splice. That said, every job is quoted before work starts, and we review the number with you before a single part gets ordered.
Neighborhoods We Serve in Kings Point
Kings Point is a single large HOA community in western Delray Beach, so most of our work is concentrated in the main entrance gates, golf-cart gates, and amenity-area gates that serve the entire development. We also handle villa and condo building gates where the association manages access at a sub-community level. Our typical response time for a gate repair call in Kings Point is same-day or next-morning, depending on the board’s scheduling rules.
- Main entrance and perimeter gates
- Golf-cart gate corridors
- Clubhouse and amenity-area gates
- Villa and condo building access gates
Service Area – Cities Near Kings Point
Archway Gate Repair works across the western Delray Beach corridor and the surrounding coastal communities. If you’re in Villages of Oriole, FL, Delray Beach, FL, Highland Beach, FL, or Boynton Beach, FL, we can usually schedule your gate job the same week.
Serving Kings Point, FL — Our Local Coverage Area
We’re based in the Kings Point area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Kings Point
We respond to Kings Point gate failures same-day or next-morning in almost all cases. Common-area gate emergencies are treated as priority work because a down perimeter gate blocks residents and emergency vehicles alike. Call (855) 360-5306 and we’ll give you a straight arrival window, not a six-hour range.
For common-area gates, the Kings Point board or property manager typically authorizes repair work before we arrive, but a diagnostic visit can often be scheduled without a full hearing. We coordinate directly with management so you don’t have to chase paperwork. Call (855) 360-5306 to figure out what your board needs.
Yes, and we recommend it. Pre-season storm readiness in Kings Point means lubricating hinges and operator chains, replacing corroded hardware, and testing the gate’s manual release so the gate can be opened if power fails. The salt air does real damage every month, not just during storms. Call (855) 360-5306 to book a maintenance visit.
If your Kings Point gate is down, binding, or behaving erratically, call Archway Gate Repair at (855) 360-5306 for a free estimate. We work on the brand already on your property, and we diagnose before we quote.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Kings Point Customers Say
"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Ernesto Flores"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Roger Ziegler"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Tyrone Carter