Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Pine Manor, FL
Gate installation in Pine Manor usually means fitting a sliding or swing gate onto a tight lot where the driveway doubles as the property boundary. Most homes here are 1950s-to-1980s manufactured homes and modest ranchers, so we’re typically working with chain-link frames, aluminum panels, and compact operator setups rather than sprawling estate entrances. The salt-laden Gulf air and hurricane-season wind loads mean every component has to be spec’d for corrosion and high-wind events from day one. Call (855) 360-5306 for a free measure and written quote.
Why Pine Manor Homes Are Different
Pine Manor is unincorporated and densely packed, hemmed between Fort Myers and Cypress Lake. That density changes gate work in ways that don’t apply a few miles east. Lots are small, often 50 feet wide or less, and a driveway gate frequently sits within a few feet of the neighboring property line. Sliding cantilever gates need track alignment precise enough that the gate doesn’t drift into a neighbor’s setback, and swing operators need clearance math done carefully so the leaf doesn’t arc across a shared fence line.
The housing stock compounds it. Manufactured homes with carports and short driveways dominate, and many of those driveways were never designed for a heavy automated gate. We regularly pour new operator pads and reinforce existing posts because the original install used a lightweight post meant for a manual chain-link gate. Then there’s the climate: subtropical sun breaks down plastic operator covers, salt air seizes unpainted steel hinges, and summer storms throw wind loads that undersized motors simply can’t hold against. A gate that works fine in a gated Fort Myers community may fail here because the environment is harsher and the clearances are tighter.
Styles & brands we work with
Our Main Pine Manor Services
Most calls from Pine Manor fall into two buckets: a gate that won’t open or close properly, and an electric system that’s stopped responding entirely. Here’s what each involves locally.
Gate Repair in Pine Manor
Mechanical gate repair in Pine Manor is often about rust, misalignment, and tired hardware. Salt air from the Gulf works its way into hinges and track rollers faster than inland, and a gate that’s been scraping for months will eventually bind completely. We handle bent posts, sagging leaves, broken wheels, seized hinges, and damaged chain-link fabric. On a small lot, even a gate that’s off its track by an inch becomes a security problem, because there’s no buffer between the driveway and the road. See what’s involved on our Gate Repair in Pine Manor page.
Electric Gate Repair in Pine Manor
Electric gate failures here usually trace back to three things: control boards cooked by humidity and heat, safety sensors knocked out of alignment by storm debris, and motors undersized for the wind load they’re being asked to hold. We work on the motor, the board, the loop detectors, and the wiring, not just the mechanical side. Because Pine Manor’s gates sit close to roads and sidewalks, a dead sensor or a gate that reverses unpredictably is a genuine hazard. Full details are on our Electric Gate Repair in Pine Manor page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Pine Manor
Pine Manor’s older manufactured homes and small lots mean most gate installations here are about fitting a secure, reliable gate into a space that was never planned for one. We measure for tight clearances, spec operators rated for high-wind events, and use galvanized or powder-coated steel that stands up to salty Gulf air. If you need a full Gate Installation, we quote the complete job before any work starts.
Automatic Gate Installation
Signs you need it
You’re getting out of the car to open and close the gate every time, or you want controlled access without a physical key handoff.
What it costs in Pine Manor
Automatic gate installation in Pine Manor typically runs $3,800 to $8,200 depending on the operator, gate width, and whether we’re adding a keypad or intercom.
How we do it
We measure the gate and its travel, confirm the post and foundation can hold the operator, run the power and control wiring, mount and program the operator, set the safety edges and photo eyes, then test the full open-close cycle under load.
Driveway Gate Installation
Signs you need it
Your driveway opens directly onto a Pine Manor road with no barrier, and you want to keep uninvited vehicles off the property.
What it costs in Pine Manor
A new driveway gate in Pine Manor typically lands between $2,800 and $6,500, with the final price set by material, gate width, and automation level.
How we do it
We check the driveway slope and the distance to the property line, set posts in concrete at the correct depth for the gate’s weight, hang and align the gate, then install the operator and safety components if the job calls for automation.
Sliding Gate Installation
Signs you need it
Your lot is narrow, your driveway is short, and a swing gate doesn’t have room to arc without hitting a car, fence, or the neighbor’s property.
What it costs in Pine Manor
Sliding gate installation in Pine Manor usually runs $3,200 to $7,800, with the track, cantilever hardware, and motor driving most of that range.
How we do it
We lay out the track or cantilever path, pour a level concrete base, install the track and rollers or the cantilever carriage system, mount the gate panel, then attach and configure the operator so the gate travels smoothly without binding at either end.
What Gate Installation Costs in Pine Manor
| Item | Typical range in Pine Manor |
|---|---|
| Manual driveway gate (basic aluminum or steel) | $2,800 – $6,500 |
| Sliding gate with track and operator | $3,200 – $7,800 |
| Full automatic gate with keypad and safety edges | $3,800 – $8,200 |
Prices in Pine Manor shift with soil conditions for the post footings, how close the gate sits to the property line, and whether we’re adding automation to an existing gate or starting fresh. Every quote is written and agreed before work begins, so there’s no surprise invoice at the end.
How long does a gate installation take in Pine Manor?
Most gate installations take one to three days on site. Manufactured-home lots and tight setbacks can add a day when we need to pour and cure additional concrete for operator pads or track bases. Call (855) 360-5306 and we’ll give you a schedule with the estimate.
Do you handle the power run and the safety sensors?
Yes. We run the electrical to the operator, wire the control board, and install the photo eyes and safety edges. A gate without working safety sensors is a code and liability problem in Pine Manor, where driveways open close to sidewalks. Call (855) 360-5306 for a full quote.
Brands We Service in Pine Manor
We’re factory-familiar with the brands already installed on Pine Manor properties, including BFT, Linear, Viking, and Ghost Controls. That means faster diagnosis, because we know each system’s usual failure points. We carry common boards, remotes, and safety parts for these brands locally. See our brands for the full equipment list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Pine Manor, FL
| Service | Typical range in Pine Manor |
|---|---|
| Gate repair diagnosis and minor adjustment | $150 – $400 |
| Hinge, wheel, or track roller replacement | $200 – $600 |
| Gate post reset or reinforcement | $300 – $900 |
| Chain-link gate fabric replacement | $250 – $550 |
| Electric gate control board replacement | $450 – $1,100 |
| Gate motor or operator replacement | $700 – $1,800 |
| Safety loop and photo eye repair | $350 – $850 |
| Manual driveway gate installation | $2,800 – $6,500 |
| Sliding gate installation with track and operator | $3,200 – $7,800 |
| Full automatic gate installation with keypad | $3,800 – $8,200 |
Two things push gate prices up in Pine Manor faster than elsewhere: tight property-line setbacks that force a sliding gate or custom-width panel, and the salt air that means we spec galvanized or powder-coated hardware instead of bare steel. Whatever the number, you get the written quote before we start, and the price doesn’t change unless the scope does.
Neighborhoods We Serve in Pine Manor
We cover all of the 33907 ZIP code, including the smaller residential pockets off Cypress Lake Drive and the manufactured-home communities along Pine Manor’s interior streets. Most of the area is reachable within a short drive from our Miami Gardens base, and we schedule Pine Manor jobs with a specific arrival window rather than an all-day hold.
- Cypress Lake Drive corridor
- Pine Manor Road area
- Six Mile Cypress Parkway adjacent streets
- Summerlin Road mobile-home communities
- Gladiolus Drive residential pockets
Service Area – Cities Near Pine Manor
Archway Gate Repair serves Pine Manor and the surrounding southwest Florida communities. We regularly work in Villas, FL, Whiskey Creek, FL, and Fort Myers, FL, and we take jobs in Cypress Lake, FL as well. If you’re just outside Pine Manor, call and we’ll confirm coverage for your street.
Serving Pine Manor, FL — Our Local Coverage Area
We’re based in the Pine Manor area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pine Manor
Most Pine Manor jobs are scheduled within one to two business days, and we carry common parts for the major brands on the truck so many repairs finish in a single visit. If you’re stuck with a gate that won’t open, call (855) 360-5306 and we’ll tell you the earliest available window.
Pine Manor is unincorporated, so permitting runs through Lee County rather than a city office. Automated gates with operators usually require an electrical permit, and setback rules depend on your specific lot. We handle the county paperwork as part of any installation quote. Call (855) 360-5306 for specifics on your property.
Yes, that’s a large share of our Pine Manor work. Community managers and individual homeowners both call us for driveway gates, perimeter gates, and operator repairs on manufactured-home lots. We’re used to working within tight side yards and respecting community rules about gate height and appearance. Call (855) 360-5306 to schedule a measure.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pine Manor Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Roger Ziegler"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Tyrone Carter"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Rohan Sharma