Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Port Salerno, FL
Gate installation in Port Salerno runs $2,400 to $9,800 depending on whether you need a manual swing gate on a concrete pad or a fully automated slide gate with safety loops and a keypad. This small fishing village on the Indian River Lagoon has a housing stock unlike inland Stuart: older cinderblock homes, mid-century ranches, and newer waterfront builds where gates are often mounted on pilings or poured pads rather than standard footings. The salt breeze off the lagoon corrodes hardware faster than anywhere a few miles inland, so material selection matters more here than in most Florida towns. Archway Gate Repair has served Port Salerno since 2011. Call (855) 360-5306 for a free estimate.
Why Port Salerno Homes Are Different
Port Salerno is a working commercial fishing village, and that shapes nearly every gate job we take here. Properties along the lagoon-side streets run back to the water, which means gates often sit within a few hundred feet of salt spray. We regularly see electrolysis on aluminum frames and rusted hinge pins on dock and boat-lift gates that are only three or four years old, something an inland gate tech would almost never encounter. The housing mix adds another variable: older Florida cracker homes and cinderblock fishing cottages often have narrow driveways and unusual setbacks, so a standard gate kit rarely fits without modification. Newer waterfront custom builds typically want a wider slide gate for boat trailers, and those are usually mounted on concrete pads with stainless fasteners, not the galvanized hardware that works fine ten miles inland. Hurricane-season storm surge in the 34992 flood zone means we also see operators that have been submerged or knocked out of level, and those need to be re-leveled or replaced before the gate will travel smooth again.
Styles & brands we work with
Our Main Port Salerno Services
Most Port Salerno homeowners call us for one of two things: a gate that has stopped moving or is binding on its track. One service handles the mechanical side, the other handles everything powered.
Gate Repair in Port Salerno
When a swing gate drags on the ground or a slide gate jumps its track, the cause in Port Salerno is usually rust, settling, or a hinge that has corroded through in the salt air. We work on the brand already on your property, diagnose the exact failure, and repair first rather than quoting a replacement by default. Dock and boat-lift gates near the lagoon are our most common calls here, and those typically need stainless hinge pins and re-leveling after a few years of exposure. Gate Repair in Port Salerno covers the full mechanical side, from hinges and rollers to bent posts.
Electric Gate Repair in Port Salerno
Electric gates in Port Salerno fail differently than they do inland. Salt corrosion eats at control board terminals, safety loop wiring, and the small connectors inside motor housings. When an operator hums but won’t move, or a gate opens halfway and reverses, we trace the fault from the motor to the hinge, not just swapping parts on a guess. Power surges after coastal storms also take out boards on LiftMaster and FAAC systems fairly often. Electric Gate Repair in Port Salerno covers motors, control boards, safety sensors, and wiring.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Port Salerno
Gate installation in Port Salerno has to account for the water. Properties near the Indian River Lagoon sit in a salt-laden, high-humidity environment where an off-the-shelf steel gate can start rusting within a year, and where storm surge can saturate an operator mounted too low. A proper install here means choosing the right galvanized or aluminum frame, using stainless fasteners throughout, and mounting the operator above the expected flood line where possible. Gate Installation is a core service, not a side job, and we handle the full scope from concrete pads to the final limit-switch adjustment.
Automatic Gate Installation
Signs you need it
You’re opening and closing the gate by hand every time, or you’ve added a boat trailer and want keypad or remote access from the truck.
What it costs in Port Salerno
Automatic gate installation in Port Salerno typically runs $3,200 to $9,800 depending on whether it’s a single swing arm or a full slide-gate operator with safety loops and a keypad.
How we do it
We start with the gate’s weight and travel path, then set the operator mount, run the power and safety loops, and tune the open and close limits so the gate doesn’t slam or stall.
Driveway Gate Installation
Signs you need it
Your current gate is rusted through at the bottom rail, the posts are leaning from years of sandy soil settling, or you have no gate and want to close off the driveway from the street side.
What it costs in Port Salerno
A manual driveway gate in Port Salerno runs $2,400 to $5,200, while adding an operator and keypad pushes the job to $4,800 to $9,800.
How we do it
We set the hinge posts in concrete at the right depth for the soil, hang the gate so it clears the driveway grading, and add a cane bolt or drop rod so the gate locks in place without stressing the hinges.
Sliding Gate Installation
Signs you need it
Your driveway is too short or too steep for a swing gate, or you have a wide boat-trailer entrance that a swing gate would block when open.
What it costs in Port Salerno
Sliding gate installation in Port Salerno typically runs $3,000 to $8,500 for the gate, track, and operator package.
How we do it
We lay a level track bed on a concrete pad, set the gate on the rollers, mount the operator and rack, and adjust the limits so the gate stops cleanly at both ends of travel.
What Gate Installation Costs in Port Salerno
| Item | Typical range in Port Salerno |
|---|---|
| Manual driveway gate | $2,400 – $5,200 |
| Automatic gate system | $3,200 – $9,800 |
| Sliding gate with operator | $3,000 – $8,500 |
Do I need a permit to install a gate in Port Salerno?
Martin County generally requires a permit for a new automatic gate, and the process varies by property type. We can confirm what Port Salerno needs before we order materials. Call (855) 360-5306 and we’ll walk you through it.
How long does a gate installation take in Port Salerno?
Most Port Salerno installs take one to two days once materials are on site. Custom gates ordered for unusual waterfront lot widths add lead time. Call (855) 360-5306 for a schedule estimate.
Brands We Service in Port Salerno
We work on LiftMaster, FAAC, BFT, and Linear systems throughout Port Salerno. Our techs are factory-familiar with each brand’s failure points, which means faster diagnosis and fewer wrong parts. We stock common boards, remotes, and safety sensors locally. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Port Salerno, FL
| Service | Typical range in Port Salerno |
|---|---|
| Manual driveway gate installation | $2,400 – $5,200 |
| Automatic gate installation | $3,200 – $9,800 |
| Sliding gate installation | $3,000 – $8,500 |
| Gate repair, mechanical only | $185 – $475 |
| Electric gate repair, board or motor | $340 – $1,200 |
Two things push prices up in Port Salerno more than inland: stainless hardware for salt-air exposure, and custom gate sizing for older homes with non-standard driveway widths. Every job gets a written quote agreed before work starts, so the number you approve is the number you pay.
Neighborhoods We Serve in Port Salerno
We cover all of the 34992 ZIP code, from the commercial marina core out to the quieter residential streets. Most repair calls get a same-day or next-day visit in Port Salerno, and we schedule installations around your availability.
- Waterfront streets along the Indian River Lagoon
- The commercial marina core near the working docks
- Older residential blocks with cinderblock and Florida cracker homes
- Newer custom waterfront builds with wide driveway gates
- Streets near the Manatee Pocket area
Service Area – Cities Near Port Salerno
Archway Gate Repair also serves the towns around Port Salerno. If you’re in Stuart, FL, Sewall’s Point, FL, North River Shores, FL, or Palm City, FL, we can handle your gate job with the same brand-specific approach. Call (855) 360-5306 and we’ll confirm availability in your area.
Serving Port Salerno, FL — Our Local Coverage Area
We’re based in the Port Salerno area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Port Salerno
For most Port Salerno repair calls, we can have a tech on site the same day or next morning. If the gate is stuck open and the property is unsecured, tell us when you call, because we prioritize those. Call (855) 360-5306 for a response window.
Some of the newer waterfront communities in Port Salerno have architectural guidelines that restrict gate material or height. We’ve worked with local HOA requirements before and we’ll help you confirm what’s allowed before we order anything.
Yes. We work on commercial slide gates and access-control systems at the marina core and surrounding waterfront businesses. Same brand range and diagnostic approach as our residential work, just scaled to heavier traffic. Call (855) 360-5306 for a commercial estimate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Port Salerno Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Danika Ellison"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Chris Padgett"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Michelle Ackerman