Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Tavernier, FL
Gate installation in Tavernier starts with the site, not the catalog. Most properties here sit on coral-rock footings with elevated stilt homes or concrete-block canal-front houses, so we measure for swing clearance on crushed-shell driveways and spec marine-grade hardware as standard. Salt-laden onshore breezes destroy powder-coated steel faster than inland installs, which is why post anchoring and sealed operator enclosures matter more than the gate style itself. Call (855) 360-5306 and we’ll walk the property with you, then write a quote before any work begins.
Why Tavernier Homes Are Different
Tavernier runs along US-1 where every property line stretches from bayfront to oceanside, and that geography drives every gate decision. The housing stock is a mix of elevated stilt homes and concrete-block canal-front houses built from the 1960s through the 2000s, with gated driveways on larger oceanside lots. Many gate posts mount to concrete piers or coral-rock-based footings rather than deep-soil posts, which changes how we anchor and how we repair. Older properties often have narrow crushed-shell or paver driveways that constrain swing clearance, so the right gate is frequently a sliding model or a swing with carefully calculated arc limits.
The climate is the other constant. Salt-laden onshore breezes, near-constant humidity, and the June through November hurricane season mean operator arms, hinges, control boards, and low-voltage wiring fail from corrosion and wind-driven rain far sooner than inland. We see it every week: a gate that worked in March starts grinding by August because a hinge pin seized with salt scale. Storm-rated anchoring, elevated control enclosures, and post-storm alignment checks are routine parts of our installs and service calls here. After a tropical system moves through, a wave of Tavernier calls comes in where gates aren’t broken at all. A photo-eye bracket shifted a quarter inch from wind, or a safety loop flooded and the operator reads “obstruction.” The first visit is often drying out and re-aligning rather than replacing the motor.
Styles & brands we work with
Our Main Tavernier Services
Tavernier homeowners call us about two things most: a gate that stopped working and an electric gate that’s misbehaving. Both get the same diagnostic-first approach, and both have dedicated pages below.
Gate Repair in Tavernier
A swinging gate that drags on a crushed-shell driveway or a sliding gate that jumps its track is usually a mechanical problem with a specific fix. In Tavernier, post corrosion and hinge seizure from salt air account for a large share of repair calls, especially on canal-front lots. We diagnose the assembly before ordering parts, and we repair rather than default to replacement. Full details on costs and same-day response are on the Gate Repair in Tavernier page.
Electric Gate Repair in Tavernier
Electric gates here fail in predictable ways: control boards short from humidity, photo-eyes corrode at the connectors, and low-voltage wiring wicks salt moisture into the operator housing. We work on the brand already on your property, and we stock common boards, sensors, and remotes for the systems most installed across the Keys. Read the full breakdown, including pricing for board replacement and motor swaps, on the Electric Gate Repair in Tavernier page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Tavernier
Gate installation in Tavernier means building for salt, wind, and coral rock before the first post goes in. Most of the homes we work on were built between the 1960s and the 2000s, and the driveways were designed for a different era, so we measure swing arcs against narrow shell-and-paver approaches and anchor to concrete piers or coral footings instead of assuming deep soil. A new gate here has to hold up through hurricane season, which is why we install with marine-grade hinges, sealed operator enclosures, and storm-rated post anchoring as the standard, not an upgrade. For a full overview of what a new gate includes, see our Gate Installation services.
Automatic Gate Installation
Signs you need it
A heavy driveway gate you’re opening by hand is the clearest sign, especially on a longer oceanside lot where walking to the post in the rain gets old fast.
What it costs in Tavernier
Expect $2,500 to $8,500 installed depending on whether we’re automating an existing gate or building a complete operator-and-gate package for a coral-rock or concrete-pier driveway.
How we do it
We survey the gate weight and post condition, spec an operator rated for the load and salt exposure, then run sealed low-voltage wiring, mount the control enclosure above flood line, and set travel limits before final safety-sensor alignment.
Driveway Gate Installation
Signs you need it
An open driveway on a canal-front or oceanside property that needs privacy and a defined property line, or a gate so rotted from salt that repair no longer makes sense.
What it costs in Tavernier
A new single swing gate typically runs $1,500 to $6,000, while a sliding gate for a narrow entry averages $3,000 to $12,000 installed, with the final number driven by panel length, post anchoring needs, and whether we’re adding an operator.
How we do it
We pull old posts only when they’ve corroded past use, then pour or bolt into the existing coral-rock footing, hang the gate with stainless hardware, and set clearance for the driveway’s crushed-shell or paver surface.
Sliding Gate Installation
Signs you need it
A driveway too narrow for a swing gate’s arc, or a crushed-shell and paver approach where a swinging leaf will scrape and bind on uneven ground.
What it costs in Tavernier
Plan $3,000 to $12,000 depending on cantilever or tracked design, gate length, and whether the operator and safety loops are included in the build.
How we do it
We set the track or cantilever rollers on the existing slab or a new concrete footer, hang the panel, then install the motor, photo-eyes, and safety loops so the gate reverses if anything is in its path.
What Gate Installation Costs in Tavernier
| Item | Typical range in Tavernier |
|---|---|
| Manual swing gate (single) | $1,500 – $6,000 |
| Automatic gate with operator | $2,500 – $8,500 |
| Sliding gate with operator | $3,000 – $12,000 |
Do I need a permit for a new gate in Tavernier?
Most new driveway gates in Monroe County require a permit, especially when an operator is involved, and canal-front or oceanside setbacks can affect placement. We handle the application details and build to current wind-load requirements.
How long does a gate installation take in Tavernier?
Most single-gate installations run one to two days once parts arrive. Custom-width panels or sliding gates ordered for a specific driveway can add two to three weeks of lead time. Call (855) 360-5306 for a schedule based on your site.
Brands We Service in Tavernier
We work on the brand already on your property, and in Tavernier that usually means LiftMaster, FAAC, Elite, or Mighty Mule. We keep common control boards, photo-eyes, and remotes in stock for these systems, which means many repairs are same-visit rather than a waiting game. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Tavernier, FL
| Service | Typical range in Tavernier |
|---|---|
| Manual swing gate installation | $1,500 – $6,000 |
| Automatic gate installation | $2,500 – $8,500 |
| Sliding gate installation | $3,000 – $12,000 |
| Hinge replacement | $150 – $400 |
| Track realignment | $175 – $450 |
| Operator arm replacement | $250 – $600 |
| Control board replacement | $200 – $700 |
| Photo-eye or safety sensor repair | $100 – $350 |
| Full service call | $75 – $150 |
In Tavernier, the two things that push cost up are salt corrosion on existing hardware and coral-rock footings that need core drilling or epoxy anchoring instead of standard post digging. Whatever the number, you’ll get the price quoted and agreed before any work starts, not after.
Neighborhoods We Serve in Tavernier
We cover all of the 33070 ZIP code and the surrounding Keys corridor. Response time across Tavernier is typically same-day for repair calls, with installation scheduling done by appointment. We work regularly in:
- Port Largo and the canal-front streets around it
- Harbor Shores
- Tavernier Creek area
- Hammer Point
- The oceanside lots along Old State Road 905
Service Area – Cities Near Tavernier
Archway Gate Repair has served Tavernier since 2011, and we run routes through the Upper Keys and into South Miami-Dade for scheduled installs and repairs. We cover Key Largo, FL, North Key Largo, FL, Islamorada, FL, and Florida City, FL from the same dispatch line.
Serving Tavernier, FL — Our Local Coverage Area
We’re based in the Tavernier area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Tavernier
Most repair calls in Tavernier can be scheduled same-day, especially for a gate stuck open or closed. Installation and custom work are scheduled by appointment after a site measurement. Call (855) 360-5306 and we’ll give you a real window, not a vague promise.
Some canal-front and gated communities in Tavernier have architectural review requirements for gate style, height, and finish, especially on oceanside lots visible from the road. We’ve worked through enough of those reviews to know what gets approved, and we can build to the spec your HOA needs.
Yes. We repair and replace the full gate system: hinges, tracks, rollers, operator arms, motors, control boards, wiring, photo-eyes, and safety loops. You don’t get sent to another company for the electrical side, because from the motor to the hinge is one job.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tavernier Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Craig Barrett"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Ernesto Flores"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Roger Ziegler