Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Tedder, FL
Gate installation in Tedder is a different job than it is ten miles inland. The homes here, mostly built between the 1950s and 1970s, sit on sandy coastal soil that shifts with every wet season, and the salt-laden air off the Atlantic works on new hardware from day one. That means a gate installed with cheap mild-steel posts and interior-grade fasteners will be leaning and rusted within two years. We’re a gate-only company, so every installation we do in Tedder accounts for the corrosion and wind loads that define this stretch of northeast Broward County. Call us at (855) 360-5306 when you’re ready to talk through what your property actually needs.
Why Tedder Homes Are Different
Tedder sits in the coastal Pompano Beach/Deerfield Beach corridor of northeast Broward County, in ZIP 33064. The housing stock is mostly mid-century single-family homes and low-rise condos, many with original concrete-block walls, barrel-tile or flat roofs, and driveway or perimeter gates mounted on aging masonry or metal posts. Those posts are the weak point. Sandy coastal soil does not hold a post the way inland clay does, so we routinely find gates that have pulled their post bases out of plumb or cracked the surrounding concrete. Add hurricane-season wind and rain, and a gate that looked fine in March can be binding or dragging by September.
The bigger issue in Tedder is salt. We see hinges and latches seized by corrosion on gates that still look decent from the street. The hardware fails before the gate does. That’s why we default to stainless or galvanized fittings on every Tedder job and explain the difference to homeowners who’ve been replacing the same rusty latch every other year. Storm-hardening is not an upsell here; it’s the only way a gate survives more than a few seasons.
Styles & brands we work with
Our Main Tedder Services
Most Tedder homeowners call us for one of two reasons: a gate that won’t open or close properly, or an electric gate that stopped responding entirely. Both get a specialist diagnosis, not a handyman’s best guess.
Gate Repair in Tedder
Mechanical gate repair in Tedder usually means one of three things: a sagging gate that drags on the driveway, a latch or hinge seized by salt corrosion, or a post that’s shifted in sandy soil. We work on the brand already on your property, and we repair before we recommend replacement. From the motor to the hinge, our techs diagnose the actual failure point and quote the fix before any work starts. If your gate grinds, sticks, or won’t stay latched, start with Gate Repair in Tedder.
Electric Gate Repair in Tedder
Electric gate repair in Tedder is a specialty, not an add-on. Salt air corrodes control board terminals and sensor wiring faster here than nearly anywhere else in Broward County, and storm-season power surges take out motors and boards. We handle motors, openers, control boards, safety loops, and wiring, and we diagnose rather than guess. If your gate beeps but won’t move, or moves halfway and reverses, read about Electric Gate Repair in Tedder.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Tedder
Gate installation in Tedder has to solve two problems at once: the shifting sandy soil that moves posts and the salt air that eats hardware. A new gate on a mid-century Tedder property is not a bolt-on job. We spec stainless or galvanized hardware, set posts deep enough to hold through hurricane-season wind loads, and match the gate to the home’s era so it looks like it belongs. For a full breakdown of what’s involved, see Gate Installation. Whether you’re replacing a rusted-out swing gate or adding a driveway gate to a home that never had one, we quote the whole job in writing before work begins.
Automatic Gate Installation
Signs you need it
You’re done with getting out of the car to open the gate every time, or your existing operator has failed and the gate is too heavy to run by hand.
What it costs in Tedder
Automatic gate installation in Tedder typically runs $2,700 – $7,500 depending on gate size, operator brand, and whether we’re pulling new power.
How we do it
We set the posts and hinges first, verify the gate swings true, then mount the operator, run the power and safety loops, and program remotes and keypads.
Gate Installation Services
Signs you need it
Your existing gate is rusted through at the hinges, the posts have shifted far enough that the gate no longer closes, or you’ve patched it twice and it’s failing again.
What it costs in Tedder
A full gate installation in Tedder typically falls between $2,100 and $5,800, with the final number set by gate length, material, and post work.
How we do it
We pull the old gate and hardware, inspect the posts, set new posts in concrete where needed, hang the new gate, and adjust until it swings and latches cleanly.
Driveway Gate Installation
Signs you need it
You have a driveway opening with no gate, or a gate that’s too narrow, too low, or too light for the security and privacy you actually want.
What it costs in Tedder
Driveway gate installation in Tedder usually runs $2,500 – $6,500 for a single swing gate, more for a double gate with automation.
How we do it
We measure the driveway width and slope, confirm the set-back room for the gate’s swing or slide, build the posts, and hang a gate sized to the opening.
Sliding Gate Installation
Signs you need it
Your driveway slopes up from the street or there’s no room for a swing gate to arc open without blocking the sidewalk or a parked car.
What it costs in Tedder
Sliding gate installation in Tedder typically runs $3,000 – $7,800 because it requires a track or cantilever system and a longer gate panel.
How we do it
We set a level track or cantilever roller posts, build the gate panel to clear the driveway slope, and dial in the rollers so it slides without binding.
What Gate Installation Costs in Tedder
| Item | Typical range in Tedder |
|---|---|
| Standard manual gate installation | $2,100 – $5,800 |
| Automatic gate installation | $2,700 – $7,500 |
| Driveway gate installation | $2,500 – $6,500 |
Can you install a gate that matches my 1960s Tedder home?
Yes. We size and style the gate to the home’s era, which for most Tedder properties means clean lines, simple pickets, and hardware that doesn’t call attention to itself. We’ll show you options before you commit.
Do you handle the power run and the safety edges for an automatic gate?
We do. Every automatic gate installation includes the electrical run, the operator, and the safety edges required by code, so the gate reverses if it meets resistance. Call (855) 360-5306 for a written quote specific to your property.
Brands We Service in Tedder
We work on the brand already on your property, and our techs know the failure points on Elite, Mighty Mule, LiftMaster, and FAAC before they arrive. That brand familiarity means faster diagnosis on Tedder service calls, with less trial-and-error on parts. See our brands for the full list of systems we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Tedder, FL
| Service | Typical range in Tedder |
|---|---|
| Gate repair | $230 – $375 |
| Electric gate repair | $375 – $825 |
| Gate opener service | $250 – $500 |
| Gate operator replacement | $800 – $2,500 |
| Control board replacement | $450 – $975 |
| Safety sensor replacement | $275 – $450 |
| Manual gate installation | $2,100 – $5,800 |
| Automatic gate installation | $2,700 – $7,500 |
Salt corrosion pushes Tedder repair prices toward the upper end when hardware has seized and every fastener has to be cut out rather than unbolted. Whatever the job, the price is quoted and agreed before any work starts, so you’ll never get a surprise invoice at the end.
Neighborhoods We Serve in Tedder
Our techs know the Tedder streets where gates sit close to the road and take direct salt spray, and the blocks where the older concrete-block homes still have their original gate posts. We cover the whole 33064 ZIP, usually arriving within one to two business days for non-emergency calls.
- Tedder
- Deerfield Beach corridor
- Pompano Beach corridor
- Coastal northeast Broward neighborhoods
- Mid-century single-family blocks
Service Area – Cities Near Tedder
Beyond Tedder, our crews cover the surrounding northeast Broward and nearby coastal communities. That includes Lighthouse Point, FL, Pompano Beach Highlands, FL, Kendall Green, FL, and Hillsboro Beach, FL. If you’re just outside Tedder, call and we’ll confirm whether your address is in our service area.
Serving Tedder, FL — Our Local Coverage Area
We’re based in the Tedder area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Tedder
For non-emergency calls we typically schedule within one to two business days across the 33064 ZIP. If your gate is stuck open and the property is unsecured, tell us that when you call (855) 360-5306 and we’ll prioritize the visit.
Most gate replacements on existing posts don’t require a permit, but new posts, electrical runs, or automated systems can trigger local requirements. We’ll check what applies to your specific property and handle the paperwork if a permit is needed.
Yes, we handle HOA and condo association gates regularly. We’ll work with your property manager on access scheduling, and we quote the job in writing so the board sees the full cost before approving anything.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tedder Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Chris Padgett"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Michelle Ackerman"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Veronica Mendoza