Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in The Crossings, FL
Gate installation in The Crossings usually means one of two jobs: replacing an original 1980s or 1990s operator on an HOA-controlled entrance, or putting a new driveway gate on a Mediterranean-style home where the old one was torn out years ago. We’re a gate-only shop, so every call we take in the 33186 ZIP is a gate call, not a side job. If you’re dealing with a dead operator, a sagging slide gate, or a gate that never existed and now needs to, call us at (855) 360-5306 for a free measure and written price.
Why The Crossings Homes Are Different
The Crossings was built largely in the 1980s and 1990s as a master-planned, deed-restricted community by Arvida. That history shapes nearly every gate job here. Most work comes from HOA-governed community entry gates and driveway gates inside planned subdivisions, not standalone custom estate gates. When a gate fails, two parties need to be satisfied: the homeowner and the HOA architectural review board. We’ve worked on enough Crossings properties to know the committees care about matching existing metalwork, keeping gate styles consistent along an entrance, and avoiding anything that alters the community’s original look.
Then there’s the equipment itself. Many original operators on controlled-access entrances are now 25 to 35 years old. Slide and swing operators from that era use control boards that manufacturers stopped supporting years ago. The subtropical climate makes it worse. Salt-laden humid air corrodes hinges and tracks. Intense sun bakes control boards inside metal enclosures. And the afternoon summer lightning storms across Miami-Dade routinely fry gate electronics at HOA entrances. Homeowners are often surprised that their original 1990s operator can’t be fixed with a part from a local hardware shelf. It usually takes a brand-specific replacement board or a full operator swap, and we diagnose that before we quote it.
Styles & brands we work with
Our Main The Crossings Services
Two services account for most of the calls we take in The Crossings: mechanical gate repair and electric gate repair. They overlap often, but each has its own page here so you can go straight to the problem you’re facing.
Gate Repair in The Crossings
Mechanical gate work in The Crossings usually means a sagging driveway gate, a slide gate jumping its track, or a hinge that’s pulling away from a stucco column. The salt air accelerates corrosion on metal hardware, and we regularly replace rusted hinges, bent track sections, and worn rollers so the gate moves smoothly again. Many gates here were installed alongside the original home build, meaning the metalwork has been exposed to three decades of subtropical weather. We go over the full gate, find every failing part, and give you one price before any work starts. Gate Repair in The Crossings covers the specific mechanical issues we see most.
Electric Gate Repair in The Crossings
Automated gates fail here in predictable ways: lightning takes out a control board, a motor burns out after years of humid duty cycles, or a safety sensor gets knocked out of alignment and the gate refuses to close. We work on LiftMaster, FAAC, BFT, DoorKing, and other common brands, so we know the failure points on the operator already on your property before we open the enclosure. That means less diagnostic time and fewer parts guessed wrong. Electric Gate Repair in The Crossings walks through what we diagnose and fix, from the motor to the control board.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in The Crossings
New gate installation in The Crossings usually starts because the old operator finally gave out and parts are no longer made, or because a homeowner wants a gate where none exists. Most homes here are 1980s and 1990s Mediterranean-style builds, so we’re matching wrought-iron or aluminum gate styles that fit the stucco architecture and satisfy HOA review standards. The climate drives material choices: powder-coated aluminum holds up to salt air better than bare steel, and we spec control boards housed for Florida heat and lightning exposure. A new installation includes the gate fabrication, the operator, the safety edges and photo eyes, and the concrete pad work, priced on one written quote. For the full scope of what we build, see Gate Installation.
Automatic Gate Installation
Signs you need it
You have a gate that opens manually every single time, or an operator that’s dead and not worth reviving.
What it costs in The Crossings
Full automatic gate installations in The Crossings typically run $3,800 to $9,500 depending on operator type, gate size, and site prep.
How we do it
We measure the opening, pour the concrete pad, mount the operator arm or slide track, set the gate, wire the control board and safety sensors, then program open and close limits.
Driveway Gate Installation
Signs you need it
You want a new driveway gate for privacy or curb appeal, or the existing gate is rusted through at the hinge points and beyond repair.
What it costs in The Crossings
Driveway gate installation alone, without an operator, generally ranges from $1,800 to $4,500 depending on gate width, material, and post work.
How we do it
We set the posts and hinge mounts, hang the gate, square it to the opening, and adjust the swing or slide so it operates cleanly before any automation is added.
Sliding Gate Installation
Signs you need it
Your driveway is short or steep, and a swing gate would block the approach every time it opens.
What it costs in The Crossings
Sliding gate installation in The Crossings typically runs $3,200 to $8,000, with the higher end for longer gates needing steel track and a heavier operator.
How we do it
We lay the track, mount the gate on roller trucks, align it across the opening, and install the rack-and-pinion drive if the gate will be automated.
What Gate Installation Costs in The Crossings
| Item | Typical range in The Crossings |
|---|---|
| Driveway gate only (no operator) | $1,800 – $4,500 |
| Sliding gate installation | $3,200 – $8,000 |
| Full automatic gate installation | $3,800 – $9,500 |
How long does a new gate installation take in The Crossings?
Most installations take one to two days on site. Gate fabrication usually adds one to three weeks before installation day, depending on material and HOA approval timing, which we factor into your schedule up front.
Do I need HOA approval for a new gate in The Crossings?
Most Crossings subdivisions require architectural review before a visible gate change. We provide the gate specs and drawings your HOA committee asks for, and we don’t order fabrication until the approval is in hand.
Brands We Service in The Crossings
We service LiftMaster, FAAC, BFT, and Linear operators every week across The Crossings. We keep common control boards, safety sensors, and remote parts in local stock so a repair isn’t delayed waiting on a distributor. If the brand on your property is one we know well, diagnosis is usually same-day. See the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in The Crossings, FL
| Service | Typical range in The Crossings |
|---|---|
| Gate repair diagnostic | $79 – $150 |
| Hinge replacement | $180 – $450 |
| Slide gate track repair | $250 – $700 |
| Electric gate diagnostic | $89 – $150 |
| Control board replacement | $350 – $900 |
| Motor replacement | $600 – $1,500 |
| Safety sensor replacement | $150 – $400 |
| Driveway gate install (no operator) | $1,800 – $4,500 |
| Sliding gate installation | $3,200 – $8,000 |
| Full automatic gate installation | $3,800 – $9,500 |
What pushes prices up in The Crossings specifically: HOA submittal revisions, stucco column repair where old hinge bolts have pulled loose, and older operator enclosures that need full rewiring after lightning or salt corrosion. Every quote is written and agreed before we order a single part or start any work.
Neighborhoods We Serve in The Crossings
We cover the full 33186 ZIP and the residential pockets inside The Crossings, including HOA-governed entrances and private driveways in the subdivisions built by Arvida. Typical response time for a repair call in The Crossings is same day or next morning, depending on call volume.
- The Crossings (main subdivisions)
- Kendall Breeze
- Devon Aire
- Kendallwood
- Sunset Park
Service Area – Cities Near The Crossings
We take gate work in the surrounding Miami-Dade communities too. If you’re in Three Lakes, FL, Country Walk, FL, The Hammocks, FL, or Kendale Lakes, FL, we can schedule your repair or installation with the same brand-specific diagnosis and upfront pricing. Call (855) 360-5306 and we’ll tell you which day we can be there.
Serving The Crossings, FL — Our Local Coverage Area
We’re based in the The Crossings area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in The Crossings
Most repair calls in The Crossings are answered same day or next morning. If you call before noon, we can usually diagnose that afternoon. Emergency calls at HOA entrances get prioritized because a stuck-open gate affects the whole community.
Most gate repairs and operator swaps don’t require a permit in Miami-Dade. New installations with electrical runs sometimes do, and we’ll tell you at the estimate whether your specific job needs one. We also help with the HOA approval documents for The Crossings subdivisions.
Yes. We coordinate with HOA board members and property managers in The Crossings regularly. We send the diagnostic report and quote to whoever approves the work, then schedule so the community entrance stays accessible or has a clear alternate route while we’re on site.
If your gate is failing, acting erratically, or you’re ready to install a new one, call Archway Gate Repair at (855) 360-5306. We’ll give you a free estimate and a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What The Crossings Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Roger Ziegler"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Tyrone Carter"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Rohan Sharma