Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Pompano Beach Highlands, FL
Gate installation in Pompano Beach Highlands usually starts with a question about whether an older gate is worth saving. Most properties here were built between the 1950s and 1970s, and the gates that came with them are welded steel or aluminum set into concrete or coral-rock footings. Salt air and summer storms have had decades to work on those anchors. Archway Gate Repair has served Pompano Beach Highlands since 2011, and we approach every job by looking at what’s already in the ground before recommending anything new. For a free estimate on gate installation or repair, call (855) 360-5306.
Why Pompano Beach Highlands Homes Are Different
Pompano Beach Highlands is a mid-century pocket of 33064 where coastal humidity shapes every gate job. Most homes are concrete-block ranch houses and small stucco bungalows with their original driveway gates and screened pool enclosures still bolted to coral-rock or concrete anchors. Those gates are now 20 to 40 years old. The salt-laden onshore air works into hinge welds and operator arms year-round, while heavy summer thunderstorms stress posts and wind-load hardware. We see a repeat pattern: a snowbird returns in November, finds the pool-enclosure gate seized and the bottom hinge rusted through after six empty months of salt air and afternoon storms, and the repair becomes equal parts mechanical work and corrosion correction. Hurricane-code wind loads also mean any new gate has to meet Broward County’s stricter anchoring standards, not just look right at the curb.
Styles & brands we work with
Our Main Pompano Beach Highlands Services
Two calls dominate our schedule in Pompano Beach Highlands: mechanical gate failures and electric operator problems.
Gate Repair in Pompano Beach Highlands
Older welded-steel and aluminum gates in Pompano Beach Highlands fail at predictable points: hinge welds, post anchors, and latch hardware. Salt air accelerates rust at those exact locations, and post-storm straightening is a regular part of the work. We cut out rotted sections, reinforce weak anchors, and recalibrate the gate to swing or slide cleanly before leaving. Full details on mechanical repair and typical Pompano Beach Highlands pricing are on the Gate Repair in Pompano Beach Highlands page.
Electric Gate Repair in Pompano Beach Highlands
When an operator seizes, it’s usually the motor, control board, or a safety sensor that’s been sitting in humid salt air. We diagnose the actual failure rather than swapping parts on a guess. Electric gate repair is our core specialty, not a side service, so wiring, safety loops, and operator logic are all handled in-house. The Electric Gate Repair in Pompano Beach Highlands page covers the full diagnostic approach and what repair typically costs here.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Pompano Beach Highlands
When a Pompano Beach Highlands gate is too far gone to repair, or the property needs a new automated entry system, Gate Installation is the honest answer. Most new installs here involve removing an original 1950s-to-1970s gate and setting a new welded-steel or aluminum gate into existing concrete or coral-rock footings, then upgrading the anchoring for current hurricane wind-load codes. The salt-air environment means we spec hardware and finishes specifically for coastal Broward County, not whatever ships by default. Installation is measured, ordered, and scheduled, with a written price agreed before any work starts.
Automatic Gate Installation
Signs you need it
You’re replacing a failed operator on a gate that’s also sagging or rusted through at the hinge points, and you want one system that opens reliably instead of two systems failing in sequence.
What it costs in Pompano Beach Highlands
Automatic gate installation in Pompano Beach Highlands typically runs $1,500 to $6,000+, depending on gate material, operator type, and the condition of existing footings.
How we do it
We remove the old gate and operator, set new posts or reinforce existing anchors for hurricane wind load, hang the new gate, mount the operator, and wire in the control system with safety edges and sensors tested before we leave.
Driveway Gate Installation
Signs you need it
The existing driveway gate has been straightened once too often, the hinges have rusted through at the welds, or the post anchors are failing in coral rock.
What it costs in Pompano Beach Highlands
Driveway gate installation in Pompano Beach Highlands commonly falls between $1,500 and $6,000+, driven by gate width, material, and how much anchoring reinforcement the old footings need.
How we do it
We measure the opening, check the existing concrete or coral-rock anchors, fabricate or order the gate to fit, set it on reinforced posts, and adjust the swing or slide until it moves cleanly with no binding.
What Gate Installation Costs in Pompano Beach Highlands
| Item | Typical range in Pompano Beach Highlands |
|---|---|
| Basic manual gate replacement (single swing) | $800 – $2,000 |
| Automatic gate opener and controls | $1,200 – $3,000 |
| Full automatic gate installation | $1,500 – $6,000+ |
Do you handle the hurricane wind-load anchoring for new gates?
Yes. Every new gate we install in Pompano Beach Highlands is anchored to meet current Broward County wind-load requirements, which usually means reinforcing existing concrete or coral-rock footings rather than reusing them as-is. Call (855) 360-5306 for a site evaluation.
Can you install a gate in Pompano Beach Highlands while I’m up north?
Yes, property managers and snowbird owners in Pompano Beach Highlands often schedule installs for the months they’re away. We coordinate by phone, confirm the written price before any work starts, and send photos after the job is complete.
Brands We Service in Pompano Beach Highlands
We work on the brand already on your property. Most Pompano Beach Highlands gates run LiftMaster, FAAC, BFT, or Linear operators, and we’re factory-familiar with each system’s specific failure points before we arrive. That means faster diagnosis, the right replacement part on the first visit, and fewer return trips. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Pompano Beach Highlands, FL
| Service | Typical range in Pompano Beach Highlands |
|---|---|
| Gate repair (general mechanical) | $150 – $600 |
| Electric gate repair | $180 – $700 |
| Hinge replacement | $150 – $400 |
| Gate opener repair | $200 – $650 |
| Gate motor replacement | $450 – $1,200 |
| Control board replacement | $250 – $800 |
| Safety sensor repair or replacement | $150 – $350 |
| Basic manual gate replacement | $800 – $2,000 |
| Automatic gate opener installation | $1,200 – $3,000 |
| Full automatic gate installation | $1,500 – $6,000+ |
Salt-air corrosion and old coral-rock footings push Pompano Beach Highlands pricing toward the upper end when anchors need rebuilding or hinges have rusted through. Whatever the figure, you’ll get a quoted price agreed before any work starts, so the invoice matches the estimate.
Neighborhoods We Serve in Pompano Beach Highlands
We work throughout Pompano Beach Highlands and the surrounding 33064 area, from the older ranch-home streets north of Sample Road to the condo and single-family pockets near the Intracoastal side. Most calls we can reach within one business day, and electric gate failures get prioritized for same-day diagnosis when we’re already working nearby.
- Pompano Beach Highlands central (west of Dixie Highway)
- Collier City
- Imperial Point
- Pompano Isles
- Santa Barbara Shores
Service Area – Cities Near Pompano Beach Highlands
Our Pompano Beach Highlands coverage extends into the surrounding coastal and inland communities. We also serve Lighthouse Point, FL, Tedder, FL, Kendall Green, FL, and Hillsboro Beach, FL, with the same gate-specialist approach we use here.
Serving Pompano Beach Highlands, FL — Our Local Coverage Area
We’re based in the Pompano Beach Highlands area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pompano Beach Highlands
For mechanical failures and electric operator issues, we’ll usually diagnose within one business day, and we prioritize same-day service when we’re already working in 33064. New gate installations are scheduled after a free measure and written quote, not on a same-day basis.
Most new automatic driveway gates in Pompano Beach Highlands require a permit through Broward County for the electrical run and structural anchoring. We’ll confirm what’s needed for your specific property before any work starts, and the price is agreed before permits are pulled.
Don’t force the gate or keep pressing the remote, since a seized motor can burn out quickly. The classic Pompano Beach Highlands issue is a rusted hinge and seized operator after a humid, empty summer. Call (855) 360-5306 and we’ll diagnose the failure rather than guessing at the fix.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pompano Beach Highlands Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Laura Schaefer"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Danika Ellison"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Chris Padgett