Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateMighty Mule Gate Repair in Burnt Store Marina, FL | Archway Gate Repair
We provide independent Mighty Mule gate repair across Burnt Store Marina, and we’re the team that checks your canal-side operator before we ever blame the motor. Here’s what twenty-plus years of working salt-exposed gate systems in this part of Lee County has taught us: in a marina community built around saltwater canals, your water-side Mighty Mule hinge and hardware fails long before the control board does. Call (855) 360-5306 for a free estimate, or keep reading to understand exactly what’s happening with your opener.

Why Burnt Store Marina Residents Choose Us for Mighty Mule Service
We work on Mighty Mule equipment every week, not occasionally. The MM-series swing arms, FM-series dual openers, slide operators, and solar/battery-backed units all have their own failure patterns, and we know them before we pull up to your driveway. For Mighty Mule sales & service, you want someone who recognizes your exact model by sight, not someone unpacking a manual on your curb. Nelson Arrieta, our owner, has been diagnosing gate openers across South Florida for over two decades. If I’ve seen the brand, I’ve already seen the problem. In Burnt Store Marina specifically, we’ve learned that the diagnosis almost always starts at the hinge, the pin, or the bracket – not the board. That’s how we keep your repair honest and your bill lower than a replacement quote. We carry Mighty Mule OEM boards and arms for current models, and quality aftermarket hinges, batteries, and hardware where OEM has been discontinued or is overpriced. Repair first, replace only when necessary.
Styles & brands we work with





Common Mighty Mule Gate Repair Problems We Solve in Burnt Store Marina
- Seized water-side hinges and pivot pins. The canal-facing leaf on a dual-swing Mighty Mule gate drags, whines, or reverses mid-travel because the salt-laden air has frozen the hinge pin solid. The operator isn’t dead – it’s fighting a gate that won’t move. We free or replace those pins, re-plumb the post, and reset the limits so the original arm keeps working.
- Dead or corroded control boards after a storm. Burnt Store Marina’s humid salt air plus surge-driven power spikes kills sealed boards and batteries, often within days of a named storm passing. We replace with Mighty Mule OEM boards where the unit is current, and we’ll tell you plainly if your board was surge-damaged rather than worn out.
- Limit switches and arm brackets drifting out of adjustment. Saturated soil from a hurricane or heavy gulf rain shifts gate posts just enough to throw off the travel limits. Your Mighty Mule opener stops short, reverses, or slams into the post – and the fix is re-squaring the post and resetting the limits, not replacing the motor.
- Salt intrusion in remote receivers, keypads, and photo-eyes. At a dock or canal-facing gate, the salt creeps inside the housings and corrodes the low-voltage electronics long before the mechanical operator shows wear. We clean and seal or replace these components and add marine-grade protection where it makes sense.
- Battery backup that won’t hold a charge. Mighty Mule solar and low-voltage openers use sealed batteries, and a battery that’s been cooked by heat and salt air for three years won’t hold enough juice to open the gate after an outage. We test the whole backup chain and replace batteries before hurricane season, not after the gate won’t open.
Mighty Mule Service in Burnt Store Marina: What Local Conditions Mean for Your Equipment
Here’s the thing about Burnt Store Marina that most gate companies never learn: this is a boating-centric, master-planned marina community in unincorporated Lee County, and nearly every gate here exists to protect watercraft and salt-exposed property. Many homes back onto saltwater canals, which means the canal-facing gate on a saltwater-backing lot routinely fails first while the street-side gate on the same property is still fine. We’ve seen it on Mediterranean-style villas along the canal and golf-course lots throughout the 33993 ZIP. The water-side hinge pins pit and seize from constant salt-laden humidity while the street-side hardware looks almost new. So we diagnose the dock or seawall-side hardware before we ever condemn the Bokeelia Mighty Mule service operator. On a canal-backing villa here, a Mighty Mule dual-swing operator kept reversing halfway through its travel on the water-side leaf. Our tech found the canal-facing hinge pins seized solid from salt exposure while the street-side hinges moved freely. We freed and replaced the corroded pins, re-plumbed the post and reset the limits – the original Mighty Mule arm and board were fine and stayed in service. That water-side-first pattern is the norm here, not the exception.
Mighty Mule Models & Products We Service in Burnt Store Marina
We service the full Mighty Mule residential line as it appears in Burnt Store Marina driveways and community entry points: the MM360 and MM560 swing opener series, the FM-series single and dual swing openers, slide gate operators, and the solar or low-voltage openers with battery backup. Our parts approach is straightforward. Where the unit is current, we use Mighty Mule OEM boards and arms. Where OEM is discontinued or overpriced, we use quality aftermarket hinges, batteries, and hardware that fit properly and hold up in salt air. We stock the common Mighty Mule boards, arms, batteries, and limit switches locally so we’re not waiting on a warehouse when your HOA needs a dock gate back online this week. If the operator is sound and the gate hardware is the real problem, we repair rather than sell an unnecessary replacement – and we’ll tell you plainly when a unit is past saving.
See the difference
Before
After
Before
After
Before
AfterMighty Mule Service Pricing in Burnt Store Marina
- Diagnostic visit: $95-$150, credited toward the repair if you proceed.
- Hinge and pivot pin replacement (water-side seized pin): $180-$340 per leaf.
- Control board replacement (Mighty Mule OEM): $280-$520 including programming.
- Limit switch and bracket reset: $120-$220.
- Remote receiver or keypad replacement: $140-$260 per unit.
- Battery backup replacement: $160-$310 including load testing.
The price is quoted and agreed before any work starts – you’ll know the number before we touch a tool. What drives the cost in Burnt Store Marina is the salt-corrosion factor: a seized hinge takes longer to free than a simple board swap, and water-side hardware often needs marine-grade replacement parts. Call (855) 360-5306 for an exact quote – estimates are free, and we’ll tell you what’s actually wrong before we tell you what it costs.
Serving Burnt Store Marina, FL — Our Local Coverage Area
We’re based in the Burnt Store Marina area and also provide Mighty Mule service in Cape Coral, so we know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mighty Mule Gate Repair in Burnt Store Marina
Because the canal-facing hardware sits in constant salt-laden humidity from the water, so the hinge pins and pivot bolts pit and seize years before the street-side hardware on the same property. The operator then drags against a frozen hinge and looks like a motor failure when it isn’t. We start every canal-lot diagnosis at the water-side hinge. Call (855) 360-5306 and we’ll check the dock-side hardware first.
Yes, and we recommend it for any electric gate in Burnt Store Marina that protects a boat, a dock, or a canal-lot property. Power outages during named storms are common here, and a Mighty Mule opener without battery backup leaves your gate dead exactly when you need it closed. We test and replace sealed batteries before the season, not after the Mighty Mule service in Palmona Park gate won’t open.
Salt air alone rarely kills a board instantly, but combined with hurricane-season power surges and humid heat it shortens the life of sealed boards and batteries significantly. We see more board failures in the weeks after a storm than in the months before one. The fix is a proper surge-protected power run and a board that’s actually sealed, not just covered.
Usually not. In Burnt Store Marina, a gate that reverses mid-travel or stops short is most often a limit switch or arm bracket that’s drifted after a post shifted in saturated soil, or a water-side hinge that’s partially seized. We check the mechanical path before we ever condemn the Mighty Mule arm or board. Call
We do. Burnt Store Marina has a lot of community entry gates, dock access gates, and pool/lanai gates under HOA management, and we work directly with boards and property managers on access-control setups that use Mighty Mule equipment. We quote the whole job upfront, handle the electrical and safety edges, and coordinate around boat-traffic schedules for Mighty Mule in Pine Island Center dock gates.
Service Areas Near Burnt Store Marina
We serve Burnt Store Marina and the surrounding Lee County and Southwest Florida communities. If you’re in Mighty Mule service in Wabasso Beach, Mighty Mule service in Fellsmere, Punta Gorda, Cape Coral, or the broader Burnt Store Marina service area, the same team handles your Mighty Mule opener with the same water-side-first diagnosis.
Book Your Mighty Mule Service in Burnt Store Marina Today
If your Mighty Mule gate is dragging, reversing, or dead, call (855) 360-5306 and we’ll get a tech out to diagnose it – often same day for emergency failures. We’ll check the water-side hardware first, quote the repair before any work starts, and keep the original operator in service whenever it’s still sound.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Burnt Store Marina and Lee County’s salt-exposed marina communities.
Request a Free Estimate in Burnt Store Marina
Tell us what you need — Archway Gate Repair responds fast. No obligation.