Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Fort Lauderdale, FL
Gate installation in Fort Lauderdale means building for salt air, hurricane wind loads, and older masonry that was rarely engineered for a 600-pound automatic gate. We’re Archway Gate Repair, a gate-only specialist handling new installs, repairs, and electric systems across the city. Most Fort Lauderdale properties we work on fall into two camps: 1920s-50s homes with original coral-rock or block walls that need independent gate footings, and newer walled waterfront estates where the gate post anchoring has to meet Miami-Dade high-velocity hurricane zone rules. Call (855) 360-5306 for a free estimate on any gate job.
Why Fort Lauderdale Homes Are Different
Salt air is the single biggest variable in Fort Lauderdale gate work, and it changes what we specify. On the Intracoastal side of Las Olas Isles, Coral Ridge, and Lauderdale-by-the-Sea, we routinely see gate operators and keypads that fail years earlier than identical equipment on the inland side of the same street. Hinges pit, circuit boards corrode, and electrolysis eats wiring connections inside the operator housing. We specify marine-grade stainless hardware and sealed control enclosures in these zones because standard zinc-plated steel simply doesn’t survive.
The second difference is structure. Many pre-Andrew walls and pilings in the 33301-33308 core were built before modern anchoring standards existed. You can’t mount a heavy automatic gate onto a 1950s coral-rock wall and expect it to hold through a Category 3 wind event. We install independent steel-reinforced concrete footings with proper embedment depth, then anchor the post to that footing. It’s slower and costs more, but it’s what Broward high-velocity hurricane zone compliance actually requires. Summer afternoon squalls also trip GFCI-protected operator circuits that worked fine all dry season, and those callbacks usually trace back to water intrusion at a poorly sealed conduit fitting.
Styles & brands we work with
Our Main Fort Lauderdale Services
Two services account for most of the calls we take from Fort Lauderdale homeowners, HOA managers, and commercial property owners. Both are covered in depth on their own pages.
Gate Repair in Fort Lauderdale
A gate that drags on its track, sags at the hinge, or won’t latch isn’t just annoying, it’s a liability and a security hole. In Fort Lauderdale, rust from salt air is the leading cause of mechanical failure; we see seized hinges and snapped weld joints on waterfront properties every week. We diagnose the exact failure point and repair first, replacing only the components that actually need it. From the motor to the hinge, we work on the brand already on your property. Gate Repair in Fort Lauderdale covers mechanical failures, hinge and post work, and track alignment in detail.
Electric Gate Repair in Fort Lauderdale
Electric gate failures in Fort Lauderdale cluster around two causes: salt-corrosion inside the operator housing and power-surge damage to control boards during summer storms. We carry boards, motors, safety loops, and wiring components for LiftMaster, FAAC, BFT, and DoorKing systems, so most electric gate calls go from diagnosis to repair in a single visit. Electric gate repair is a core specialty here, not something we refer out. Electric Gate Repair in Fort Lauderdale covers motor replacement, control board repair, safety sensor work, and wiring diagnosis.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Fort Lauderdale
A new gate in Fort Lauderdale has to stand up to salt spray, hurricane wind loads, and the reality that your existing wall or piling was probably never engineered for the gate you want. We install automatic and manual gates on independent footings, not bolted to old masonry, and we specify marine-grade hardware for any property within a few blocks of the Intracoastal or the beach. See our full Gate Installation service page for specs and options.
Automatic Gate Installation
Signs you need it
You’re opening and closing your driveway gate by hand, the existing operator is dead, or you’re building new construction and the gate was never part of the original plan.
What it costs in Fort Lauderdale
Full automatic gate installations in Fort Lauderdale typically run $4,500 to $9,800 depending on gate size, operator type, and whether new footings are required.
How we do it
We pour independent reinforced footings, set the posts, hang the gate, mount the operator, wire the power run and safety edges, then set travel limits and run full open/close cycle testing.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rusted through, the posts are leaning, or you’re adding a gate to a property that never had one.
What it costs in Fort Lauderdale
Driveway gate installation in Fort Lauderdale ranges from $2,800 for a basic single swing gate to $8,000+ for a full-perimeter automatic estate gate with new footings.
How we do it
We measure the opening, check the existing post or piling condition, pour new footings where needed, mount the gate and hardware, then align, lubricate, and test the full swing or slide cycle.
Sliding Gate Installation
Signs you need it
Your property has a wide driveway or limited swing clearance, and a cantilever or rolling slide gate makes more sense than a swing gate.
What it costs in Fort Lauderdale
Sliding gate installations in Fort Lauderdale typically run $4,000 to $8,500 including the track or cantilever carriage system, gate panel, and motor where applicable.
How we do it
We set the track or cantilever rollers, place the gate panel, mount the operator and rack, install safety loops and edges, then set limits and speed so the gate opens and closes smoothly.
What Gate Installation Costs in Fort Lauderdale
| Item | Typical range in Fort Lauderdale |
|---|---|
| Basic single swing gate (manual) | $1,800 – $3,400 |
| Automatic gate with operator | $4,500 – $9,800 |
| New concrete footings (per post) | $400 – $900 |
Marine-grade stainless hardware and post-and-rail upgrades push costs toward the upper end, especially on waterfront properties. Every job is quoted and agreed in writing before any work starts.
How long does a gate installation take in Fort Lauderdale?
Most installations take one to two days on site, plus concrete cure time for new footings. Permitting with the city or HOA can add a week or more.
Do I need a permit for a new gate in Fort Lauderdale?
Many Fort Lauderdale gate installations require city permitting, especially automatic gates with electrical runs, and HOA approval is common in gated communities. We handle the paperwork and coordinate with the local building department. Call (855) 360-5306 to talk through your specific property.
Brands We Service in Fort Lauderdale
We work on the brand already on your property. Our techs are factory-familiar with LiftMaster, FAAC, BFT, Elite, and Mighty Mule, among others, and we stock common boards, motors, and safety parts locally so we’re not waiting on ground shipping for routine repairs. That brand-specific knowledge means a faster diagnosis and fewer return trips. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Fort Lauderdale, FL
| Service | Typical range in Fort Lauderdale |
|---|---|
| Hinge replacement | $180 – $420 |
| Gate post replacement or reinforcement | $650 – $1,600 |
| Operator replacement | $850 – $2,800 |
| Control board replacement | $750 – $1,800 |
| Safety sensor repair or replacement | $275 – $650 |
| Track alignment or replacement | $400 – $1,200 |
| Keypad or intercom repair | $180 – $520 |
| Basic single swing gate (manual) | $1,800 – $3,400 |
| Automatic gate with operator | $4,500 – $9,800 |
Salt-air corrosion and pre-existing footing work push Fort Lauderdale prices toward the higher end, especially on Intracoastal and beach-adjacent properties where marine-grade parts are non-negotiable. The price we quote is the price you approve before any work starts, and we flag any additional scope the moment we find it.
Neighborhoods We Serve in Fort Lauderdale
We cover the full Fort Lauderdale area from Las Olas and the downtown core out to the western neighborhoods. Our typical response window is same-day or next-day for urgent repair calls, and scheduled installation work is booked within a few business days.
- Las Olas Isles
- Coral Ridge
- Lauderdale-by-the-Sea
- Victoria Park
- Harbordale
Service Area – Cities Near Fort Lauderdale
Archway Gate Repair also serves the communities around Fort Lauderdale, including Plantation, FL, Broadview Park, FL, Broward Estates, FL, and Lauderhill, FL. If your property sits in one of these nearby cities, the same gate specialists, the same brand knowledge, and the same upfront pricing apply.
Serving Fort Lauderdale, FL — Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fort Lauderdale
Most repair calls in Fort Lauderdale get a same-day or next-day visit. For an electric gate that won’t open and is blocking vehicle access, we treat it as urgent and prioritize the call. Phone (855) 360-5306 and let us know what the gate is doing so we can show up with the right parts.
Yes. We work regularly with HOA managers, condominium associations, and commercial property owners across Fort Lauderdale, including gated communities where access control and multiple entrance points are part of the job. Commercial and HOA estimates are free and we’re familiar with board approval timelines.
We cover all of Fort Lauderdale including the 33301, 33302, 33340, and 33345 ZIP codes, from the beach side through downtown and out west. Our primary shop is in Miami Gardens, so we’re within a short drive of the whole city, including all Intracoastal and canal-front neighborhoods.
If your gate is sagging, seized, dead, or just not reliable, call us at (855) 360-5306 for a free estimate. We’re the gate guys, and that’s all we do. home
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fort Lauderdale Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Tyrone Carter"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Rohan Sharma"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Laura Schaefer