Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Broadview Park, FL
Gate installation in Broadview Park usually means replacing an original 1960s or 1970s gate on a CBS ranch home, often because the hinges have pulled out of a rusted post or the latch no longer lines up after years of sandy soil shifting. We quote every Broadview Park job before any work begins, and the price we agree on is the price you pay. Call Archway Gate Repair at (855) 360-5306 for a free estimate on a new gate, a motor, or a full automatic system.
Why Broadview Park Homes Are Different
Broadview Park is flat, low-lying, and residential, with most homes built between the 1950s and 1970s. The lots are modest, the houses are single-story concrete block, and the original gates are usually aluminum or chain-link attached to posts that have been in the ground for fifty years. The soil here is sandy, and the water table sits close to the surface. After a heavy afternoon thunderstorm, water pools around post bases, works its way down, and starts the rust-and-rot cycle that eventually leaves every gate leaning or dragging.
The other big factor is the air itself. Broadview Park sits close enough to the coast that salt-laden air settles on metal hardware year-round. Hinges, track wheels, and latch plates corrode faster than they would even a few miles inland. When someone calls us about a gate that suddenly won’t close, the problem is rarely one thing. It’s usually a combination: a hinge corroded stiff, a post that shifted half an inch, a latch that doesn’t align anymore. In Broadview Park, we reset posts in concrete more often than we adjust hardware. That’s the local reality, and it changes how we quote and how we work.
Most gates in this neighborhood are decorative rather than automated. That doesn’t change the corrosion problem, but it does mean a lot of what we do here is structural: cutting out rotten or rusted posts, pouring new footers, and matching the new gate to a fence that’s been there since the Nixon administration. HOA requirements in unincorporated Broward County vary by pocket, so we confirm what’s needed before quoting when there’s any question.
Styles & brands we work with
Our Main Broadview Park Services
Most Broadview Park homeowners call us for one of two reasons: a gate that won’t open or close properly, or an electric gate that stopped responding. We handle both, and we specialize in the brands already installed on Broadview Park properties.
Gate Repair in Broadview Park
A leaning gate, a dragging gate, a latch that won’t catch, hinges that scream when the wind blows – those are the calls we get from Broadview Park homes with original 1960s and 1970s gates. The sandy soil and standing water at post bases mean most repairs here involve digging out the old footing, resetting the post in fresh concrete, and re-aligning the gate so it swings true again. We don’t patch a rusted post and call it done. We quote the fix that lasts in this specific soil and climate. Gate Repair in Broadview Park covers mechanical repairs, post resets, latch replacement, and hinge work on manual and automatic gates.
Electric Gate Repair in Broadview Park
When an electric gate in Broadview Park stops working, the cause is usually corrosion or standing water. Control boards sit in boxes that bake in the sun and get humid inside every afternoon storm. Motors work harder when hinges drag. Safety sensors get knocked out of alignment by shifting posts. We diagnose the whole chain, from the motor to the hinge, and we work on the brand already on your property, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Electric Gate Repair in Broadview Park covers motors, control boards, safety loops, wiring, and the mechanical parts that keep an automated gate running.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Broadview Park
Broadview Park’s original aluminum and chain-link gates are now fifty to seventy years old, and in this salt-air, high-water climate, they are past the point where another repair makes sense. When a post has rotted through or a gate frame has corroded beyond safe welding, Gate Installation is the honest answer. We install manual and automatic gates sized for the modest driveways common on these CBS ranch lots, with posts anchored deeper than the original installers ever thought necessary. Gate Installation includes the gate, the posts, the hardware, and when needed, the full automation package.
Automatic Gate Installation
Signs you need it
You have a manual gate but you want the convenience of opening from the car, or your old automatic system has failed and the gate itself is worn past repair.
What it costs in Broadview Park
A new automatic gate installation in Broadview Park typically runs between $3,200 and $7,500 depending on gate size and opener system.
How we do it
We measure the driveway opening, quote the gate, motor, and controls as one written price, then install and program the full system including safety sensors.
Driveway Gate Installation
Signs you need it
Your existing driveway gate hangs lower than it used to, the hinges have torn out, or the frame has rusted through in places no repair can fix.
What it costs in Broadview Park
Driveway gate replacement in Broadview Park usually falls between $2,000 and $5,500 for a standard single or double gate including posts and hardware.
How we do it
We remove the old gate and posts, pour new concrete footers sized for the sandy soil, then anchor and hang the new gate so it swings level and stays that way.
Sliding Gate Installation
Signs you need it
Your driveway is too short for a swing gate to open fully, or your existing sliding gate has jumped its track because a post shifted in the sandy soil.
What it costs in Broadview Park
Sliding gate installations in Broadview Park generally range from $3,800 to $8,500 including the track, rollers, and gate panel.
How we do it
We set the track on a level concrete base that won’t shift with the water table, mount the gate, and adjust the rollers so it slides without binding.
What Gate Installation Costs in Broadview Park
| Item | Typical range in Broadview Park |
|---|---|
| Driveway gate (single) | $2,000 – $5,500 |
| Automatic gate package | $3,200 – $7,500 |
| Sliding gate system | $3,800 – $8,500 |
How long does gate installation take in Broadview Park?
Most Broadview Park installations are done in one to two days, but the concrete footers need time to cure before the gate is hung and adjusted. We schedule around weather, not through it, especially during hurricane season.
Do you handle permits for gate installation in Broadview Park?
We confirm what unincorporated Broward County requires for your specific installation and pull permits when they are needed. If your HOA has its own approval process, we’ll work to those requirements before any concrete is poured. Call (855) 360-5306 to discuss your project.
Brands We Service in Broadview Park
We work on the brand already on your property. That includes BFT, Linear, Viking, and Ghost Controls, along with five other major gate brands. Because we know each system’s failure points, we stock the most common Broadview Park repair parts for faster turnarounds, so you aren’t waiting on a series of wrong guesses. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Broadview Park, FL
| Service | Typical range in Broadview Park |
|---|---|
| Manual gate repair | $180 – $450 |
| Electric gate repair | $300 – $1,200 |
| Motor replacement | $600 – $1,800 |
| Control board replacement | $400 – $1,200 |
| Safety sensor repair | $150 – $450 |
| Hinge replacement | $120 – $400 |
| Post reset in concrete | $350 – $900 |
| Driveway gate installation | $2,000 – $5,500 |
| Automatic gate installation | $3,200 – $7,500 |
| Sliding gate installation | $3,800 – $8,500 |
What pushes a Broadview Park quote toward the top of those ranges is almost always the post condition. If we have to dig out a rusted or rotten post, pour a new footer, and let it cure before hanging the gate, that is additional labor and materials beyond a simple hinge or board swap. Every Broadview Park job is quoted in writing before work starts, and that agreed price does not change unless you change the scope.
Neighborhoods We Serve in Broadview Park
We work throughout the 33317 zip code and every residential pocket of Broadview Park, from the older ranch-home blocks closest to State Road 7 to the duplex-heavy streets on the east side. Our techs know which parts of this area flood faster and which have the worst salt exposure, because it changes how we set posts and seal hardware.
- Broadview Park central residential blocks
- East Broadview Park duplex areas
- Homes near State Road 7
- West Broadview Park
- Streets bordering Plantation and Davie
Service Area – Cities Near Broadview Park
Archway Gate Repair is based close enough to Broadview Park to reach most calls within an hour, and we regularly work in neighboring communities with similar housing and climate conditions. That includes gate work in Fort Lauderdale, FL, Plantation, FL, Broward Estates, FL, and Lauderhill, FL. If you’re unsure whether we cover your address, call (855) 360-5306 and ask.
Serving Broadview Park, FL — Our Local Coverage Area
We’re based in the Broadview Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Broadview Park
Most Broadview Park properties are within an hour of our base, and for a security issue like a gate stuck open or an automated gate that won’t close, we make those calls a priority. Call (855) 360-5306 and we’ll tell you when a tech can be on site.
Parts of Broadview Park fall under small community associations, and some do not. If yours does, we’ll help you understand what needs approval before we quote, and we won’t start work until you have what you need. Call (855) 360-5306 and we’ll walk through it.
For most Broadview Park gate repairs, we can give you a working range over the phone based on the gate type and the symptom. For installations, we prefer to measure on site so the written quote covers exactly what your driveway needs. Estimates are free.
If your Broadview Park gate is leaning, dragging, stuck, or dead, call Archway Gate Repair at (855) 360-5306. We’ll diagnose it, quote it honestly, and fix it right the first time.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Broadview Park Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Chris Padgett"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Michelle Ackerman"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Veronica Mendoza