Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Wilton Manors, FL
Gate installation in Wilton Manors means working with tight driveways, compact lots, and gates that have to clear cars, pedestrians, and South Florida weather all at once. Most homes here were built between the 1950s and 1970s, and their original gates have long since rusted through or sagged past repair. Archway Gate Repair handles the full replacement, from removing the old post set in sandy soil to installing a new gate that actually swings level and latches true. Call us at (855) 360-5306 when you’re ready for a gate that fits a Wilton Manors lot the first time.
Why Wilton Manors Homes Are Different
Wilton Manors is a dense, highly walkable small city where most homes sit on compact lots with driveways or carports opening directly onto narrow streets. That changes gate work in ways you won’t see in Weston or Parkland. There’s rarely room for a long sliding gate track, so most jobs are tight-clearance swing gates or compact slide systems. The island setting matters too. Salt-laden air off the Intracoastal and Atlantic sits on metal year-round. Hinges rust faster here than almost anywhere inland, and the high water table means posts set in sandy soil shift and lean within a few seasons.
The housing stock is predominantly 1950s to 1970s single-story concrete-block and stucco ranch homes and small bungalows. Many have carports that were later converted to garages, with original chain-link or welded-wire fencing still standing. When we pull an old gate post in Wilton Manors, it’s common to find the below-grade section thinned to almost nothing. The repair rarely stops at the gate itself. The post, the hinge mounts, and often the operator bracket all need attention before anything will hang straight again.
Pool gates are their own category here. On small lots, the pool fence and driveway gate frequently share a post, and the city enforces pool gate self-latching and height codes. A rusty pool gate in Wilton Manors isn’t just a repair, it’s a safety-barrier violation waiting to be flagged. We routinely find gates that fail both a rust inspection and a code inspection at the same time.
Styles & brands we work with
Our Main Wilton Manors Services
These are the two calls we get most from Wilton Manors homeowners and property managers. If you’re not sure which one fits your situation, start with the description that matches what you’re seeing.
Gate Repair in Wilton Manors
Most repair calls in Wilton Manors start with a gate that won’t close fully, drags on the ground, or swings past its stop. On these older concrete-block homes, we’re usually working on gates that were installed decades ago and have been patched a few times since. The salt air has done its work on the hinges and latch hardware. We diagnose what’s actually failing before touching anything, then quote the fix. If you’re dealing with a sagging gate, a stuck latch, or a post that’s pulling away from the house, see the full breakdown at Gate Repair in Wilton Manors.
Electric Gate Repair in Wilton Manors
Automatic gates in Wilton Manors fail differently than mechanical ones. Humidity gets into control boards, salt corrosion works on limit switches and wiring connections, and sandy soil shifts the post enough to throw off the operator’s travel. We work on LiftMaster, FAAC, BFT, DoorKing, Mighty Mule, and the rest of the common brands, and we stock the failure-prone parts rather than ordering everything from a warehouse. If your opener hums but the gate doesn’t move, or the gate reverses at the wrong point, go to Electric Gate Repair in Wilton Manors for the specifics.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Wilton Manors
Gate installation in Wilton Manors usually means replacing a gate that outlived its structure, not building on open land. The original steel or chain-link gate from the 1960s or 1970s has rusted through, the posts are leaning in sandy soil, and patching it again doesn’t make sense. We remove the old hardware, reset or replace the posts, and build a gate that meets current wind-load and pool-barrier codes for this specific climate. A full install typically includes the gate frame, hinges and latch hardware, and, when you want it, the operator and safety sensors. See Gate Installation for the full scope of our installation work.
Automatic Gate Installation
Signs you need it
You’re done opening and closing a heavy gate by hand, or you have an old operator that’s failed and isn’t worth rebuilding.
What it costs in Wilton Manors
Expect $2,800 to $7,500 for a complete automatic gate system, including the gate, operator, and safety sensors.
How we do it
We measure the driveway opening, verify the post footings in the sandy soil, install the gate and operator, then set and test the safety loops and force settings.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rusted through, sagging past the point of repair, or no longer closes across the full opening.
What it costs in Wilton Manors
A basic single driveway gate installation in Wilton Manors starts around $1,200; powder-coated aluminum or steel designs in this area vary with the width of your drive.
How we do it
We pull the old gate and posts, pour new footings where needed, hang the new gate, and adjust the hinges so it swings level on the first day.
Electric Gate Installation
Signs you need it
You have a good manual gate but want it automated, or a new gate being installed needs a complete operator and access system from day one.
What it costs in Wilton Manors
When you’re adding power to an existing gate, the operator and control work typically runs $750 to $2,500 depending on the gate’s weight and travel.
How we do it
We mount the operator, run the power and low-voltage wiring, install the safety edges and photo sensors, and program the open and close limits to match your gate’s actual travel.
Sliding Gate Installation
Signs you need it
Your lot slopes toward the street or the driveway is too tight for a swing gate to open fully without hitting a wall or car.
What it costs in Wilton Manors
Sliding gate installation in Wilton Manors typically falls between $2,000 and $8,500, with the higher end covering powered, cantilevered, or longer commercial spans.
How we do it
We set the track or cantilever posts, mount the gate, align the rollers and guides, and fine-tune the motor drive so the gate doesn’t bind at either end.
What Gate Installation Costs in Wilton Manors
| Item | Typical range in Wilton Manors |
|---|---|
| Basic manual driveway gate | $1,200 – $2,800 |
| Electric operator and controls (existing gate) | $750 – $2,500 |
| Full automatic gate system | $2,800 – $7,500 |
Every estimate is quoted and agreed before any work starts, so the number we give you is the number on the final invoice unless we find something structural and you approve the change first.
Do I need a permit for a gate installation in Wilton Manors?
In many cases yes, especially if you’re adding a powered operator or your gate is part of a pool barrier. Archway Gate Repair can tell you what your specific project requires in Wilton Manors before we start.
How long does a gate installation take in Wilton Manors?
Most single residential driveway gates are installed in one day. Automatic systems with new operators and safety sensors usually take a day to a day and a half, depending on power access and post condition.
Can you match my existing fence and gate style in Wilton Manors?
Yes. We build with the same materials and profiles found on most Wilton Manors homes, from aluminum to steel to wood-look composites, so the new gate matches what’s already on the property.
Brands We Service in Wilton Manors
We’re factory-familiar with the nine brands you’ll find on most South Florida properties: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means we know each system’s specific failure points before we arrive, and we keep common control boards and safety parts on the truck for same-day fixes. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Wilton Manors, FL
| Service | Typical range in Wilton Manors |
|---|---|
| Basic manual driveway gate installation | $1,200 – $2,800 |
| Automatic gate installation (complete) | $2,800 – $7,500 |
| Electric operator and controls (existing gate) | $750 – $2,500 |
| Sliding gate installation | $2,000 – $8,500 |
| Electric gate repair | $125 – $450 |
| Mechanical gate repair | $95 – $350 |
| Hinge replacement | $150 – $500 per hinge |
| Gate opener repair | $150 – $550 |
| Control board replacement | $250 – $800 |
In Wilton Manors, rust damage and post movement push prices up more than anything else. If a post needs to be reset or a bracket has corroded through, that’s a structural fix, not a quick parts swap. Whatever the scope, the price is quoted and agreed before any work starts, so there’s no surprise on the final invoice.
Neighborhoods We Serve in Wilton Manors
We work throughout the 33305 ZIP code, from the houses along Wilton Drive down to the residential streets east of Andrews Avenue and west of NE 4th Avenue. Most calls are local enough that we can have a technician on site the same day for repair work.
- Central Wilton Manors
- West Wilton Manors
- East Wilton Manors
- Middle River Terrace
- South Wilton Manors
Service Area – Cities Near Wilton Manors
Beyond Wilton Manors, we take gate repair and installation calls throughout central Broward County. If you’re in Sunrise, FL, North Andrews Gardens, FL, Oakland Park, FL, or Boulevard Gardens, FL, we’re nearby and we work in those neighborhoods regularly.
Serving Wilton Manors, FL — Our Local Coverage Area
We’re based in the Wilton Manors area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Wilton Manors
Most repair calls in Wilton Manors get same-day or next-day service. We carry common LiftMaster, FAAC, BFT, and Mighty Mule parts on the truck, so many jobs are finished in one visit. Call (855) 360-5306 to check our current schedule for your street.
Some do, especially the smaller communities where gates face the street directly. We’ve worked with enough Wilton Manors HOAs to know what usually gets approved and what doesn’t. Bring us your HOA’s requirements and we’ll build the gate to match.
Yes. Estimates are free, whether you need a repair diagnostic or a full replacement quote. We walk the job, inspect the gate and posts, and give you a written price before anything gets scheduled.
Call Archway Gate Repair at (855) 360-5306 for a free estimate on any gate job in Wilton Manors. We’ll diagnose what’s wrong, quote the full price before work starts, and get your gate working right.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Wilton Manors Customers Say
"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Ernesto Flores"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Roger Ziegler"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Tyrone Carter