Ghost Controls Gate Repair in Burnt Store Marina, FL

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Ghost Controls Gate Repair in Burnt Store Marina, FL | Archway Gate Repair

We repair Ghost Controls gate operators throughout Burnt Store Marina, FL. If your swing or slide gate has gone dead, is throwing limit faults, or only one leaf moves, call (855) 360-5306 for a free estimate. What makes our work here different is simple: in a canal-lot marina community, the water-side gate fails first, and we come looking for that before we write any quote.

Two professional technicians installing a modern black metal driveway gate in Burnt Store Marina, FL

Call (855) 360-5306

We’re an independent Ghost Controls service provider, not a manufacturer-authorized dealer. That means we work on the brand already on your property, diagnose it against real failure patterns we see in Lee County’s salt-air communities, and repair before we recommend replacing. From Ghost Controls sales & service support to full operator retrofits, Burnt Store Marina homeowners and HOA managers call us when the gate has to work, not just look good.

Why Burnt Store Marina Residents Choose Us for Ghost Controls Service

Owner Nelson Arrieta has been doing gate work in South Florida for over two decades, and the Ghost Controls brand is one of the nine major gate systems our crew works on weekly, including Ghost Controls service in Palmona Park. That matters in Burnt Store Marina because the failures we see here are not the textbook ones. A Ghost Controls operator on a canal-lot villa rusts differently than the same unit inland. If I’ve seen the brand, I’ve already seen the problem, and our techs come to your property already knowing which Ghost Controls failure points to check first.

We’re a gate-only shop, not a handyman service that happens to own a multimeter. That focus pays off on Ghost Controls low-voltage solar and battery operators, where a “dead” gate is usually a charge controller, a corroded terminal, or a drifted post rather than a bad motor. We use Ghost Controls-compatible OEM-spec boards, harnesses, batteries, and limit switches where they’re available, and quality aftermarket equivalents when a proprietary part is discontinued. You get a straight answer: repair first, replace only when necessary.

Explore

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Common Ghost Controls Gate Repair Problems We Solve in Burnt Store Marina

  • Water-side corrosion on canal and dock gates. The Ghost Controls control box, battery terminals, and hinge pivots on the saltwater-facing side of a Burnt Store Marina property pit and seize months faster than the street-side hardware. We see green-corroded connectors and seized pivots on water-side gates that still look fine from the driveway.
  • Battery and charge-controller failure after named storms. After a hurricane or extended cloudy stretch, Ghost Controls solar units sit undercharged. The gate reads dead when the panel, battery, or charge controller is the actual fault. We test each component instead of assuming the arm is bad.
  • Post and alignment drift from storm-season wind and saturated canal-bank soil. Hurricane wind and waterlogged ground heave gate posts in Burnt Store Marina, throwing Ghost Controls swing arms out of geometry. The operator strains, trips obstruction sensing, or throws limit faults that look exactly like a board failure.
  • Keypad and photo-eye water intrusion at community and dock-access gates. Humid salt air fogs photo-eye lenses and corrodes keypad and card-reader boards at community entry and dock gates. Entry credentials fail before the motor does, and tenants blame the opener when the real fault is in the access hardware.
  • One dead leaf on a dual-swing Ghost Controls system. On TD2 and TSS two-leaf driveway kits, one side often stops first. In Burnt Store Marina it’s usually the dock- or canal-facing leaf. We trace it before we touch anything: battery, harness connector, limit switch, or hinge pivot.

Ghost Controls Service in Burnt Store Marina: What Local Conditions Mean for Your Equipment

Burnt Store Marina is a boating-centric, master-planned community in unincorporated Lee County, zoned 33993, where nearly every gate exists to protect watercraft and salt-exposed property. Most lots back onto saltwater canals or sit beside the wet/dry boat-storage basin. That geography changes how Ghost Controls equipment ages, and it’s something a generic Florida gate page will never tell you: the dock- or canal-facing gate on a given property fails first, almost every time. The street-side operator on the same house may run for years without issue while the water-side unit corrodes through its battery terminals, control board connectors, and hinge pivots on a much faster clock.

On a canal-lot villa off the community’s water-side streets, our crew was called for a Ghost Controls dual-swing driveway gate that had gone dead on the dock-access leaf only. The street-side arm ran fine. The water-side control box had green-corroded battery terminals and a seized hinge pivot. We replaced the harness connectors and battery, freed and re-lubed the hinge, re-plumbed the salt-side post, and re-learned the limits so both leaves cycled together again. That’s the kind of repair you only find if you know to look water-side first.

Ghost Controls Models & Products We Service in Burnt Store Marina

Our Burnt Store Marina calls cover the full Ghost Controls residential lineup: the Heavy-Duty Single Swing (TDS series) solar and battery operator kits, Dual Swing (TD2 and TSS) two-leaf driveway setups, and slide-gate operators with accessory kits including AXGN keypads, photo-eyes, and battery-backup add-ons. Because we work on nine major gate brands, we keep common Ghost Controls-compatible boards, harnesses, batteries, and limit switches on hand for faster turnaround.

When a proprietary part is discontinued, we’ll tell you straight and source a quality aftermarket equivalent that does the same job. We do not sell a new operator to fix a post that simply moved. If the motor, arm, and board test fine, the problem is alignment or power, and we’ll quote the honest fix.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Ghost Controls Service Pricing in Burnt Store Marina

Standard Ghost Controls service visits in Burnt Store Marina typically run $95 to $165. Board or charge-controller replacement on a TDS or TD2 unit runs $220 to $420. Battery replacement runs $40 to $200 depending on battery type and count. Hinge or post repair runs $150 to $350, and a full single-operator replacement with installation typically lands between $700 and $1,300. Every quote is agreed before we start work.

Two professional technicians installing a modern black metal driveway gate in Burnt Store Marina, FL

Your estimate covers diagnosis, parts, and labor, and there is no invoice surprise at the end. Canal-side corrosion jobs can lean toward the higher end because of the added labor on seized hardware. Call (855) 360-5306 for an exact quote on your Burnt Store Marina gate; estimates are free.

Serving Burnt Store Marina, FL — Our Local Coverage Area

We’re based in the Burnt Store Marina area and know this community well. We also provide Ghost Controls service in Cape Coral, Palmona Park, Bokeelia, and Pine Island Center. Use the map below to see our full service coverage — if you’re nearby, we can almost certainly help.

FAQs – Ghost Controls Gate Repair in Burnt Store Marina

Service Areas Near Burnt Store Marina

Our Ghost Controls repair coverage extends beyond Burnt Store Marina to nearby Lee County and Southwest Florida communities. If you’re in another part of the Gulf-coast service area, check our Burnt Store Marina service area page for local specifics. We also run dedicated service pages for Ghost Controls service in Wabasso Beach and Ghost Controls service in Fellsmere. Those pages cover their own salt-air and storm-driven failure patterns.

Book Your Ghost Controls Service in Burnt Store Marina Today

Your Burnt Store Marina and Ghost Controls in Pine Island Center gates have a specific set of failure patterns tied to salt air, canal proximity, and storm exposure. We diagnose them daily. Call (855) 360-5306 for a free estimate, and we’ll get your electric gate back online the right way.

Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Burnt Store Marina and greater Lee County gate repair needs with a repair-first approach.

Need Gate Repair help in Burnt Store Marina? Licensed & insured · same-day response · free estimates
Call (855) 360-5306
Areas We Serve

Request a Free Estimate in Burnt Store Marina

Tell us what you need — Archway Gate Repair responds fast. No obligation.

By providing your information above, you agree to our Privacy Policy and authorize us to contact you by phone, email, or text about your request, including by the independent professionals who may fulfill it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch