Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Sebring, FL | Archway Gate Repair
Ghost Controls gate repair in Sebring typically costs $95 – $185 for service-call and diagnostic work, with most motor, board, or photo-eye repairs landing between $225 and $560 depending on parts. Our shop is an independent Ghost Controls service provider, not a factory dealer, and we work on these operators daily across Sebring’s lakefront 55+ communities. The one thing that makes Ghost Controls work different here: the operators rarely fail first. The post under them gives way. Call (855) 360-5306 for a free estimate.
Why Sebring Residents Choose Us for Ghost Controls Service
Most gate companies in Highlands County know a few brands. We work on Ghost Controls units week after week, which means the technician who rolls up already knows the TDS2’s charge-controller failure patterns and the DTP1’s tendency to drift out of limit sync after a lightning strike. Nelson Arrieta grew up around slide gates in South Florida and has been turning wrenches on gate openers for over two decades. He learned the electrical side at Miami Dade College and has spent the years since working through every brand Sebring throws at us. “If I’ve seen the brand, I’ve already seen the problem” isn’t a slogan. It’s just how our trucks get stocked.
We cover all of Sebring, including the 33870, 33872, 33871, and 33876 ZIPs, and we carry Ghost Controls OEM boards, arms, and battery harnesses along with sealed enclosures that hold up better in this humidity than the factory originals sometimes do. We quote the price before any work starts and we don’t sell you a new operator when a hinge re-square and a photo-eye gets the gate running.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Sebring
- Gate reverses on its own after a storm or power flicker. In Sebring’s older lakefront communities, the photo-eye brackets mounted to aluminum posts corrode loose over a decade of afternoon thunderstorms. The sensor shifts, the operator reads a false obstruction, and the gate backs off. We replace the bracket, re-align the eye, and re-sync the limits. Sometimes the post needs to be re-leveled first.
- Solar unit that won’t hold a charge. Ghost Controls solar operators sit under carports, oak canopies, and shaded east-facing walls all over Sebring. The battery and charge controller get starved, especially through summer storm season when the panel gets partial sun at best. We test the battery under load, check the charge-controller output, and swap in a fresh battery harness or a higher-capacity panel when the site calls for it.
- Keypad or remote dead after heavy rain. Central Florida humidity gets into Ghost Controls keypads and control boxes through micro-cracks in the seal, and the circuit board corrodes from the inside out. We see this constantly on gates in the 33870 and 33872 ZIP codes where sprinkler systems also throw water at the keypad housing. We’ll replace the board, seal the enclosure properly, and test every remote on site.
- Operator arm stalls or binds partway through its travel. Sebring’s light steel and aluminum driveway gates sit on posts set in sandy soil. Over years, the post leans. The arm then fights the gate’s new angle, draws too much current, and trips the operator. We check the post before the board. It’s the repair-first way to handle this, and it keeps a good operator from being condemned over geometry.
- Gate won’t fully close or latch after windy weather. Tropical-storm gusts twist light gate frames. The operator’s limit settings fall out of range. On a Ghost Controls DTP1 dual-swing, you’ll hear the arm grunt at the end of travel and the gate will bounce back. Limit re-sync and hinge re-torque usually solves it. We’ll tell you if the gate itself has cracked at the weld and needs a plate welded in.
Ghost Controls Service in Sebring: What Local Conditions Mean for Your Equipment
Here’s something that shows up in Sebring more than almost anywhere else we work. In the older lakefront 55+ communities around ZIPs 33870 and 33872, a huge number of Ghost Controls operators were retrofitted onto shared driveway gates with posts that were never leveled for an opener in the first place. The gate worked fine as a manual swing gate for 20 years. Then an arm got bolted on. The post was already leaning two degrees, the hinge was worn, and the opener has been fighting all of it ever since. So when a gate reverses on its own or won’t latch, we routinely re-square the hinge post and check the track alignment before we ever touch the control board. That post-first pattern shows up here far more than in newer inland subdivisions, where the concrete was poured level within the last decade. If your Ghost Controls operator has been serviced twice and still misbehaves, the problem might be the post under it, not the motor bolted to it.
Ghost Controls Models & Products We Service in Sebring
We work on the full Ghost Controls residential lineup: the TDS2 single-swing opener, the DTP1 dual-swing for double driveway gates, and the AXS1 slide gate opener. We also service the Heavy-Duty Series solar and battery operators, which are common on the larger ranch and estate gates around Sebring’s lake roads. On parts, we use Ghost Controls OEM boards, arms, and battery harnesses where they’re the right call, and we’ll use sealed aftermarket photo-eyes and battery enclosures where they hold up better in Sebring’s year-round humidity. We keep common Ghost Controls parts in the truck, so the first trip often finishes the job. No second trip, no “parts are on order” voicemail.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Sebring
Here’s what Sebring homeowners typically pay. The service call and diagnostic runs $95 – $185. Photo-eye or safety sensor replacement runs $125 – $275. Control board replacement on a Ghost Controls unit lands between $280 – $650, depending on the model and whether we need the OEM board or can use a sealed aftermarket equivalent. New battery or battery harness for solar units runs $140 – $380 installed. Motor or arm assembly replacement for a TDS2 or DTP1 is $340 – $700. Full operator replacement, parts and labor, runs $1,900 – $4,100 installed. Every job gets a written quote before work starts. The estimate is free, and the price doesn’t change mid-repair. Call (855) 360-5306 if you’d like us to come look at your gate.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Sebring since the day we first fixed a photo-eye that wasn’t the photo-eye’s fault.
Serving Sebring, FL — Our Local Coverage Area
We’re based in the Sebring area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Sebring
In almost every Sebring case we see, the photo-eye bracket has corroded loose from the post, so the sensor got knocked out of alignment. The operator reads that as an obstruction and reverses. Power flickers can also reset the operator’s limits, especially on older Ghost Controls boards. We’ll check the bracket, the post, and the board in one visit. Call (855) 360-5306 and we’ll quote it free.
Yes, we do this often on Sebring ranch homes where the gate is sound but the homeowner wants a remote opener or a solar unit added. We check the post level and hinge wear first. A Ghost Controls opener on a leaning post will burn through arms and boards fast. If the gate and post check out, we quote the install parts and labor before any work starts.
It works, but it struggles. Sebring’s afternoon thunderstorms and heavy canopy mean the solar panel gets fewer direct-charge hours, and the battery drains faster. If your unit is shaded or the panel has years of dust and leaf litter, you’ll see the gate slow down mid-summer. We’ll test your charge-controller output and battery capacity and tell you if a battery replacement, panel relocation, or hardwired conversion makes more sense. Call (855) 360-5306 for a free estimate.
Moisture intrusion. The keypad seal fails, water gets in, and the circuit board inside corrodes. In Sebring’s humidity, this happens even without direct rain exposure. We’ll replace the keypad or the internal board, reseal the enclosure, and test it with every remote and the operator itself. Call (855) 360-5306.
If the motor arm is still strong, the board isn’t burned, and the gate moves freely when disengaged, repair is usually the right call. If the arm has been straining for years, the board has visible corrosion, and the gate itself is tired, we’ll tell you straight. We will not replace a repairable operator. Call (855) 360-5306 and we’ll give you an honest on-site read.
Service Areas Near Sebring
Our Ghost Controls service covers all of Sebring and the surrounding Highlands County communities. We also run service calls to Ghost Controls service in Sebastian for coastal customers who call us after storm seasons, and we handle Ghost Controls service in Charlotte Park when their operators need board work or solar troubleshooting. This page covers Ghost Controls repair in Sebring specifically, but our trucks run the wider Central Florida map.
Book Your Ghost Controls Service in Sebring Today
If your Ghost Controls gate is acting up in Sebring, call (855) 360-5306. We’ll schedule a diagnostic, show up in a stocked truck, and give you a written price before anything gets taken apart. Same-day service is available for urgent failures during the storm season. One call, and we’ll put a specialist on it.