Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Lake Placid, FL | Archway Gate Repair
Ghost Controls gate repair in Lake Placid typically means one of three things: a swing arm that binds after post settlement, a solar battery that cooked through another Florida summer, or a rusted hinge that’s overloading the operator. We fix all three, and we’re usually out to your property within a day or two. Our difference is this: we don’t just bench-test the operator. We check the gate it’s bolted to, the posts holding that gate, and the sandy soil those posts sit in. That’s what makes Ghost Controls repair in Lake Placid different from anywhere else. Call (855) 360-5306 for a free estimate.
Why Lake Placid Residents Choose Us for Ghost Controls Service
We work on the brand already on your property. If it says Ghost Controls on the arm, we know the board inside it, the battery that feeds it, and the failure points that show up after a Highlands County rainy season. Archway Gate Repair is a gate-only shop, so every diagnostic decision comes from someone who has seen hundreds of these operators fail in specific, repeatable ways. Nelson Arrieta, our owner, grew up around Miami Gardens and cut his teeth on electrical systems and industrial mechanics at Miami Dade College’s North Campus before spending more than two decades diagnosing openers across South Florida. If I’ve seen the brand, I’ve already seen the problem. That’s not a slogan. It’s how we approach a Ghost Controls service in Sebring and across the county.
We’re an independent Ghost Controls service provider, not a dealer or a manufacturer agent. That independence means we recommend the repair that actually makes sense for your gate and your budget, not the part that helps a quota. We also stock the components that Lake Placid jobs actually need: OEM-compatible boards, 12V batteries, keypad receivers, and stainless hardware that holds up to lake-country humidity.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Lake Placid
- Post settlement throws the swing arm out of geometry. Lake Placid’s sandy soil loses bearing strength after a few days of heavy summer rain. When a post leans even two or three degrees, a Ghost Controls TDS dual-swing arm binds, trips its limits, or reverses mid-travel. We re-set the post in concrete and re-learn the arm limits before condemning any electronics.
- Solar units stall or die after cloudy stretches. Year-round heat and humidity shorten 12V battery life, and clouded or dusty panels undercharge them. We test the charge controller, load-test the battery under real conditions, and tell you honestly whether the fix is a battery, a panel, or both.
- Rust-seized hinge pivots on older tube-steel farm gates. A hinge that won’t swing freely overworks any Ghost Controls arm, and it reads like a motor failure. We cut out the seized hinge barrels, weld fresh ones, and use stainless fasteners so the operator isn’t fighting the gate leaf.
- Water intrusion into control boxes and keypads. Mounted low beside a rural driveway, a Ghost Controls control box catches splashback from every downpour. Corroded terminal blocks and photo-eye wiring cause intermittent faults that look random. We re-seal, replace the damaged terminals, and relocate the box where water can’t pool.
- Dead battery backup after a power outage. A battery that tests fine on the bench but fails under a real load is a common call here. We bring known-good batteries to the job and verify the charging circuit, not just the battery itself.
Ghost Controls Service in Lake Placid: What Local Conditions Mean for Your Equipment
Lake Placid’s caladium and citrus heritage left a lot of properties with working agricultural gates, field access gates, equipment yard entries, and grove gates that were never designed for automation. We’re talking tube-steel frames welded in the 1980s, chain-link panels on bent posts, and hinge pins that haven’t been greased since the last freeze. A Ghost Controls opener retrofitted onto one of these gates doesn’t fail because the board is bad. It fails because the gate it’s moving was never straightened, re-hung, or reinforced before the operator went on. On ranchette properties off County Road 29 and along the older in-town streets, we regularly start a Ghost Controls in Avon Park repair by pulling the gate leaf, re-hanging it on new hinge barrels, and re-setting the posts in concrete or compacted gravel. Only then do we touch the operator. Skip that step and you’ll be calling us again after the next heavy week of rain, because the gate will sag and the arm will stall exactly like it did before. Diagnosis here means looking at the whole system from the motor to the hinge, not just swapping a board and hoping.
Ghost Controls Models & Products We Service in Lake Placid
We service the full residential Ghost Controls line that shows up on Lake Placid properties: the Heavy-Duty Dual Swing TDS series tube-gate operator kits, the Single Swing TS series architectural arm operators, and the Slide SL series rack-and-pinion units. We also handle the solar and battery accessory line, including 12V battery packs, charge controllers, keypad receivers, and remote entry systems. When a board, arm, or receiver is repairable, we use genuine Ghost Controls replacement parts. When a battery or hinge is the failure point, we use proven aftermarket components that hold up better to Highlands County humidity. We keep common parts stocked locally so a Ghost Controls in Zolfo Springs or Lake Placid call doesn’t wait on a week of shipping.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Lake Placid
| Service | Typical Range |
|---|---|
| Diagnostic / service call | $75 – $115 |
| Limit switch re-learn | $90 – $150 |
| Post re-set & alignment | $180 – $400 |
| 12V battery replacement | $80 – $200 |
| Control board replacement | $250 – $650 |
| Hinge replacement / weld repair | $150 – $350 |
Lake Placid pricing depends on what actually failed: a limit re-learn is a quick fix, while a post re-set on a rural gate takes concrete, labor time, and a return trip to check for movement after the next rain. Every job is quoted and agreed before work begins. You’ll know the price before we turn a wrench. Estimates are free. Call (855) 360-5306 for an exact number on your Ghost Controls system.
Serving Lake Placid, FL — Our Local Coverage Area
We’re based in the Lake Placid area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Lake Placid
Usually not. In Lake Placid, a partway-open reverse is most often a binding hinge or a post that’s settled out of alignment, so the operator hits resistance, reads it as an obstruction, and reverses. We check the gate geometry before we condemn the motor, and a surprising number of “dead motors” are actually just gates that need a hinge or post re-set. Call (855) 360-5306 and we’ll diagnose it on site.
Sunlight feeds the panel, the panel charges the battery through the charge controller, and the battery runs the operator. When the battery is sulfated or the panel is clouded with dust, a few Florida cloudy days drain it to zero. We test all three components before replacing anything. It’s rarely just the panel.
Yes, but in Lake Placid the gate itself usually needs work first. We re-hang leafs, reinforce frames, and re-set posts before the operator goes on. Mounting a new Ghost Controls kit onto a sagging farm gate is how you get a stall fault within two months. We’d rather do it once, whether it’s Ghost Controls service in Okeechobee or right here.
Yes. Control boxes mounted low beside rural driveways catch water and splashback, and the humidity corrodes terminals faster than you’d expect. We seal boxes, relocate them when possible, and use dielectric grease on connections. A rainy-season week in Lake Placid finds every unprotected low-mount box.
The most common cause is a battery that tests fine on a bench but collapses under a real load, especially in heat. The second is a charge controller that isn’t actually charging. We test both under load and replace only what failed. Call (855) 360-5306 for a free estimate on the fix.
Service Areas Near Lake Placid
Our Ghost Controls service coverage reaches beyond Lake Placid to the surrounding Highlands County communities, including Sebring, Avon Park, Venus, Lorida, and the rural stretches along US 27 and State Road 70. For a full look at where we work, see our Lake Placid service area page. We also take Ghost Controls calls in West Vero Corridor and Saint James City, where the same rainy-season post settlement and rust issues apply.
Book Your Ghost Controls Service in Lake Placid Today
A Ghost Controls operator that won’t run is a gate that won’t close, and in Lake Placid that means livestock, equipment, or a driveway left open. Call (855) 360-5306 for a free estimate. We’ll diagnose the whole system, quote the job before work starts, and get your gate back online. For more on our broader Ghost Controls sales & service work, reach out any time.
Written by Nelson Arrieta, Owner at Archway Gate Repair. Diagnosed, not guessed – from the motor to the hinge.