Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Lake Placid
If your gate is sagging, stuck, or dead after a storm, here’s the direct answer: most gate repairs in Lake Placid run between $160 and $520, and we can usually get to your property within one to two business days. The exact number depends on whether you’re dealing with a sinkhole-soft post, a burned-out control board, or a snapped hinge, but you’ll know the price before we touch a single bolt. Call (855) 360-5306 and we’ll talk through what’s happening, quote it over the phone when possible, and schedule a visit that fits your week.
Lake Placid is not a cookie-cutter Florida town. It’s rural ranchettes off County Road 29, older in-town lots from the 1950s and 60s, and working agricultural gates on citrus and caladium properties. Our Gate Repair crew knows the difference between a manual chain-link gate that’s been hanging since Reagan was in office and a LiftMaster opener that needs a new board. And we treat them differently. That matters when the gate in question is draped over a washed-out post in sandy soil after a week of afternoon thunderstorms.
Why Archway Gate Repair Is Lake Placid’s Preferred Gate Repair Company
We’re a gate specialist, full stop. Not a fencing outfit that occasionally adjusts hinges. Not a handyman service that’s willing to take a look. Every job we book is a gate job, which means the person walking onto your Lake Placid property has already diagnosed your brand, your opener model, and your failure mode before the truck is in park.
Nelson Arrieta leads our repair team, and the standard he’s set is simple: diagnosed, not guessed. We work on the brand already on your property, from LiftMaster and FAAC to BFT and Linear, and we carry the parts that Lake Placid gates actually need. Common hinge kits, board capacitors, safety photocell sets, post base hardware. That stock cuts the number of return trips and keeps your timeline honest.
Reputation here is built the old way. One fixed gate at a time. A neighbor on Dahlia Avenue tells the guy on Lake June Road. An HOA manager near US-27 calls about a sensor fault, and three weeks later we’re fixing a swing gate two streets over. We’re not hustling volume, and we’re not pushing replacement quotes before we’ve looked at the repair cost. The math usually favors fixing it.
Styles & brands we work with
Sliding Gate Repair in Lake Placid
Sliding Gate Repair is one of our most frequent calls in Lake Placid, especially on outlying parcels where a cantilever or track-style sliding gate guards a long driveway or equipment entrance. Sandy soil is the recurring villain here. After heavy summer rains, water channels under the gate track, erodes the sub-base, and leaves the track soft or the gate frame dragging. Add a few years of rust on the roller wheels and you’ve got a gate that groans, binds, or refuses to move at all.
A typical sliding gate repair in Lake Placid starts around $140 for basic roller replacement or track debris removal, and climbs to $300 – $500 when we’re re-leveling track sections and resetting the motor carriage after washout. If a control board died, you’re looking at a board-specific range of $250 – $600 depending on the operator brand. We quote it first.
Track Resets and Post Stabilization
When a sliding gate isn’t sliding, the track is usually the problem. We check rail alignment, clean out packed sand from the rollers, and re-anchor track sections that have lifted or shifted. On rural Lake Placid driveways, we often add a compacted gravel base under the track so the next hard rain doesn’t undo the work.
Opener and Limit Switch Correction
Sliding gates with automation rely on limit switches to know where to stop. When those get knocked out of position by a gate that’s been manhandled or a power surge, the gate over-travels or stops eight feet short. We realign the limits, inspect the motor capacitor, and confirm the gate moves smoothly before we leave. Most of this is repaired same-visit.
Wrought Iron Gate Repair in Lake Placid
Wrought Iron Gate Repair in Lake Placid is less about the decorative scrollwork and more about the frame underneath it. Humidity here never really stops, and older iron gates on blocks built from the 1950s through the 1980s have absorbed decades of moisture at the weld points. The bottom rail rusts. Hinge barrels seize. And the weight of the gate, which was always considerable, starts turning the post.
Most wrought iron rehabs in Lake Placid fall between $190 and $450. That covers wire-wheel rust removal, welding cracked joints, replacing the hinge pins, and applying rust-inhibiting primer and paint. When the post itself has rotted at the base or shifted in sandy soil, a full post re-set runs $250 – $600, depending on whether we’re pouring a new concrete footing or just packing gravel and re-bracing.
Hinge Barrel and Wheel Replacement
Older wrought iron gates often ride on single wheel or fixed-pin hinges that were never designed for 40 years of Florida humidity. We cut out the seized pins, weld on fresh hinge barrels, and adjust the gate so the weight hangs evenly. It stops the grinding and takes the load off the post.
Rust Cutout and Rail Reinforcement
When a bottom rail has rotted through, we remove the damaged section, sleeve or replace the channel, and weld it to match the original profile. Then we treat the surrounding metal against rust creep. The goal is a gate that looks right and actually handles the weight it’s carrying.
Trusted Brands We Service in Lake Placid
We’re factory-familiar with nine major gate brands, but in Lake Placid we see a lot of LiftMaster, FAAC, BFT, and Linear. These are the workhorse openers on the market, and we know each one’s specific failure points: the boards that burn out on older LiftMaster models, the capacitor weakness on some BFT swing operators, the sensor alignment quirks on FAAC. We keep common repair parts in stock for these brands, which means a Lake Placid repair often happens in one visit rather than two or three. If your opener is from a brand you don’t recognize, call us anyway. Obsolete boards are our specialty, and we’ll tell you honestly what’s repairable and what’s not.
Common Gate Repair Problems We See in Lake Placid Homes
- Post settling and lean after heavy rain. The flat, sandy terrain east of US-27 doesn’t drain like clay soil does. Posts set shallow lose their bearing strength quickly, especially on rural roads and older streets, which is why we treat post re-setting as a routine repair, not an emergency add-on.
- Obsolete control boards on legacy openers. Many Lake Placid gates were automated 15 to 25 years ago. Those boards age out, and when they’re discontinued, you can’t just buy the replacement. We source rebuilt boards where they’re reliable and tell you flat out when a new operator is the cheaper path.
- Rust and hinge wear on older chain-link and tube-steel farm gates. Year-round humidity is relentless here. Hinge pins corrode, gates sag, and the latch side stops meeting the post. This is a replumb-and-rehang job, not a new gate. Unless the frame is rotted through, we fix it.
- Safety photocell and edge sensor failures on automatic gates. Rain, lightning, and ant nests inside sensor housings cause photosensor faults. The gate then refuses to close or reverses constantly. We clean, re-align, and if the cell is dead, replace it. On Lake Placid residential systems, this is a common same-day fix.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Lake Placid, FL
Here’s what we tell every customer before we turn a wrench: you’ll have a written quote in your hand, you’ll agree to it, and only then do we start. No invoice surprises at the end.
For repairs, this is what Lake Placid pricing generally looks like:
- Basic hinge, latch, or realignment work: $150 – $250
- Post re-setting in concrete (single post): $250 – $450
- Weld and rust repair on an iron or tube-steel gate: $190 – $450
- Control board replacement (brand-dependent): $250 – $600
- Motor or operator swap for a sliding gate: $450 – $1,100
What moves the number? The size and weight of the gate, whether the post requires a full footing pour, and the brand of opener. A farm gate on County Road 29 with a dead post is a different job than a residential walk gate near Lake June Road with a bent hinge. We quote both honestly. Call (855) 360-5306 for a free estimate, including for work in the 33852 and 33862 zip codes.
We Also Serve Cities Near Lake Placid
Our Gate Repair in Lake Placid service area reaches the surrounding communities too. If you’re in Sebring, Avon Park, Zolfo Springs, or Okeechobee, the same crew that handles Lake Placid gates can schedule your repair. We route from Lake Placid outward, so call (855) 360-5306 and we’ll tell you the next available window for your address. Free estimates apply everywhere we work.
Serving Lake Placid, FL — Our Local Coverage Area
We’re based in the Lake Placid area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Lake Placid
Yes, a leaning post can almost always be fixed without replacing the gate. In Lake Placid’s sandy soil, post settling after heavy summer rain is common because water washes out the bearing material around the footing. We remove the gate, dig out the old footing, re-set the post in fresh concrete or packed gravel, and re-hang the gate level. Even badly leaning posts on rural roads and older in-town streets are repairable this way. If you’re up against a fence line that’s also shifted, we’ll tell you where the gate work stops and what else you may need. Call (855) 360-5306 and describe what you see, and we’ll give you an honest first take.
When the control board is obsolete, you have three options: find a rebuilt or NOS board, retrofit a modern board to the existing motor, or replace the operator. For older LiftMaster and FAAC systems, a rebuilt board can cost $250 – $450 and buys you more years if the motor is still strong. If the motor is also tired, a full operator replacement is often the better money, starting around $700 for many residential systems. We never pad that answer to sell you a new gate. Call (855) 360-5306 with the brand and model from the operator cover, and we’ll tell you which option fits your opener.
Yes. Solar gate openers are common on rural Lake Placid properties where running line voltage to the gate is expensive or impractical. We service the motor, the control board, the battery bank, and the solar charge path, and we diagnose the difference between a dead battery and a dormant board. The usual failure is an aging battery that no longer holds charge after long cloudy stretches, and that is a straightforward replacement. If your solar gate opener is from Ghost Controls, Mighty Mule, or another common brand, we know the wiring. Call (855) 360-5306 and we’ll walk you through what to check first.
If your automatic gate closes on a car, a person, or a pet without stopping, it needs safety photocells, period. Most residential gate openers installed after the early 1990s were designed for photo eyes, but many older Lake Placid gates were installed before those standards were evenly enforced. If your gate is missing the sensors or they’re disconnected, that is a safety issue, not just a code issue. We install and align photocell sets on most brands, and the cost starts around $180. Call (855) 360-5306 and we’ll check whether your opener has the terminals for a photocell pair, and quote the full install.
The best fix for a sagging wrought iron gate depends on what’s actually causing the sag. If the hinge pins are worn, we replace them and re-hang the gate so the weight distributes correctly. If the bottom rail has rusted and dropped, we weld in a reinforcement bar or splice a new rail section. If the post has drifted, the fix is a post re-set, not just another hinge shim. On most Lake Placid wrought iron gates we see, all three factors are present in some combination. A real repair runs $190 – $450. Call (855) 360-5306 and we’ll tell you what your gate specifically needs before we quote it.
Contact Archway Gate Repair in Lake Placid
If your gate is sagging after the rain, your opener won’t respond, or you just want a straight answer about repair versus replacement, call us. Nelson Arrieta and the Archway team work on Lake Placid gates every week. We’ll quote the work before we start, and we’ll tell you honestly whether the fix is a $200 hinge job or a full operator swap. No pressure, no inflated replacement pitch. Call (855) 360-5306 for a free estimate.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Lake Placid and the surrounding Highlands County communities.