Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Lake Placid, FL
Gate installation in Lake Placid, FL usually means working with the gate and post setup already on the property, not starting from a blank slate. Homes here run from 1950s concrete-block houses in town to rural acreage with tube-steel farm gates. The sandy soil shifts after summer downpours, so a new gate often needs new footings, not just new hinges. Archway Gate Repair has served Lake Placid since 2011, and we work on the brand already on your property. Call (855) 360-5306 for a free estimate.
Why Lake Placid Homes Are Different
Lake Placid’s housing stock leans heavily toward single-story concrete-block and wood-frame homes built between the 1950s and 1980s. Outlying parcels add detached garages, sheds, and fenced acreage to the mix. The gates on these properties tend to be older chain-link, tube-steel farm gates, or manual driveway gates with worn hinges and posts set directly in sandy soil. That soil is the defining factor here. It drains fast, which is good during a dry spell, but a heavy rainy-season week saturates the ground and the sand loses bearing strength. Posts lean, gates drag, and latch alignment goes out the window.
Rust is the other constant. Year-round humidity and heat accelerate corrosion on metal gates, especially at the hinge barrels and the bottom rail where moisture sits. Our techs expect rust at the hinge line on older Lake Placid gates the same way a coastal tech expects salt corrosion. It changes how we quote: if we’re re-hanging a gate, we check whether the post itself is still sound before we promise a straight gate.
Styles & brands we work with
Our Main Lake Placid Services
Lake Placid homeowners and property managers call us most often about two things: a gate that no longer opens or closes properly, and an electric gate that has stopped responding altogether. Here’s what each one involves here.
Gate Repair in Lake Placid
A gate that drags on the ground in Lake Placid is usually a post problem more than a hinge problem. Sandy soil gives way after heavy rain, the post leans, and the gate follows it. We reset posts in concrete, replace worn hinges, straighten racked frames, and re-align latches so the gate actually closes and stays closed. Older chain-link gates often need the tension wire re-run or the post caps replaced. If the damage is too far gone for a dependable repair, we’ll tell you honestly and quote a replacement instead. Read more about Gate Repair in Lake Placid.
Electric Gate Repair in Lake Placid
Electric gates in Lake Placid fail in predictable ways: a storm trips a breaker, a safety sensor gets knocked out of alignment, or a control board shorts from a power surge. We diagnose the problem at the component level, from the motor to the hinge, rather than swapping parts on a guess. Our techs know LiftMaster, FAAC, BFT, and Linear systems well enough to identify the failure point before arriving on site. If your opener works but the gate won’t budge, it’s usually mechanical, not electrical. See Electric Gate Repair in Lake Placid for the full breakdown.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Lake Placid
Gate installation in Lake Placid usually means replacing a gate that has rusted through, sagged beyond adjustment, or outlived its posts. The sandy soil here means a proper install starts underground: new footings set in concrete so the gate stays square through the first rainy season. Whether you’re replacing a tube-steel farm gate on a ranchette or putting in a new driveway gate in town, the job is measured, ordered, and scheduled, not rushed. We quote a written price before any work starts. Our full installation process is covered on the Gate Installation page, and here’s what Lake Placid jobs typically involve.
Automatic Gate Installation
Signs you need it
You’re done opening and closing a heavy gate by hand every time you come and go, and the gate is structurally sound enough to carry an opener.
What it costs in Lake Placid
Automatic gate installation in Lake Placid typically runs $3,000 to $9,000 depending on gate size, opener type, and the amount of concrete work the soil requires.
How we do it
We measure the gate and opening, set or reinforce posts in concrete, mount the opener and arm, run power from the nearest service point, and tune the open and close limits before testing the full cycle.
Driveway Gate Installation
Signs you need it
Your existing driveway gate has rusted hinges, a racked frame, or posts so far out of plumb that repair would cost more than a new gate.
What it costs in Lake Placid
Driveway gate installation in Lake Placid typically falls between $1,500 and $6,000 depending on gate width, material, and whether automation is included.
How we do it
We pull the old gate, inspect the posts, pour new footings where the sandy soil has undermined the originals, hang the new gate, and set the latch and stops so the gate closes true.
What Gate Installation Costs in Lake Placid
| Item | Typical range in Lake Placid |
|---|---|
| Manual driveway gate (single swing) | $1,500 – $4,000 |
| Automatic gate system (opener, arms, sensors) | $3,000 – $9,000 |
| Full replacement with posts and concrete work | $4,000 – $10,000 |
Prices move most on two things in Lake Placid: the amount of concrete needed to stabilize posts in sandy soil, and the distance from the gate to the nearest power source for an automatic setup. Every quote is fixed and agreed before we order materials or start digging.
How long does a gate installation take in Lake Placid?
Most manual gate replacements take one to two days. Automatic gate installations run two to four days once materials arrive, depending on the power run and concrete curing time. We schedule the work around the weather, not against it.
Do you handle the power run for an automatic gate in Lake Placid?
Yes. We run power from the nearest service point to the opener, set the safety sensors, and wire the keypad or remote receiver so the system works as one unit. We don’t leave the electrical portion for another contractor. Call (855) 360-5306 for a written quote.
Brands We Service in Lake Placid
We work on the brand already on your property. Our techs are factory-familiar with LiftMaster, FAAC, BFT, and Linear systems, which covers most of the automatic gates installed across Lake Placid. Common boards, sensors, and remote receivers are kept in stock, which shortens repair turnaround on weekdays. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Lake Placid, FL
| Service | Typical range in Lake Placid |
|---|---|
| Gate hinge repair or replacement | $150 – $400 |
| Gate post re-setting in concrete | $250 – $600 per post |
| Chain-link gate repair | $125 – $350 |
| Manual gate alignment and latch repair | $100 – $300 |
| Electric gate diagnostic visit | $75 – $150 |
| Control board replacement | $400 – $1,200 |
| Gate opener motor replacement | $500 – $1,500 |
| Safety sensor repair or replacement | $150 – $400 |
| Manual driveway gate replacement | $1,500 – $6,000 |
| Automatic gate installation | $3,000 – $9,000 |
The biggest cost drivers in Lake Placid are post conditions and the power run. Sandy soil that has washed out around footings means more concrete and more labor before a gate can be hung straight. We quote the full price upfront and don’t start until you’ve approved the number.
Neighborhoods We Serve in Lake Placid
We work throughout Lake Placid and the surrounding ranchette country, from in-town lots built in the 1960s to larger parcels out toward the citrus groves and caladium fields. Our techs know that a gate set in sand behaves differently than one set in clay, and we plan for it. Typical response is same-day or next-day for repairs, with installation scheduled around materials and weather.
- In-town Lake Placid (33852)
- Lake June Pointe
- Placid Lakes
- Outlying acreage along US 27
- Rural parcels off County Road 29
Service Area – Cities Near Lake Placid
Archway Gate Repair covers Lake Placid and the surrounding Highlands County communities. If your property sits outside town, we regularly work in Sebring, FL, Avon Park, FL, Zolfo Springs, FL, and Okeechobee, FL. Give us a call and we’ll confirm coverage for your specific address.
Serving Lake Placid, FL — Our Local Coverage Area
We’re based in the Lake Placid area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lake Placid
Most repairs in Lake Placid are scheduled same-day or next-day depending on call volume. A gate that won’t close is a security and safety issue, so we prioritize emergency calls. Call (855) 360-5306 and we’ll give you an honest arrival window.
Manual gate replacements generally don’t require a permit in Lake Placid, though automatic gate systems may need electrical inspection depending on the scope. We can tell you what applies to your specific property before work begins. HOAs with gate requirements are common in the lakefront communities, so we work to their specs.
Yes. That’s a big part of the work in Lake Placid. We re-set posts, replace rusted hinges, straighten tube-steel frames, and re-tension chain-link fabric. Repair first, replace only when necessary. If the gate is too far gone, we’ll show you exactly why and quote a replacement instead.
If your gate is leaning, dragging, or not opening at all, call Archway Gate Repair at (855) 360-5306. We’ll diagnose the problem, quote the fix upfront, and get your gate working like it should. Serving Lake Placid since 2011.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lake Placid Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Chris Padgett"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Michelle Ackerman"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Veronica Mendoza