Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Lantana, FL
Gate installation in Lantana usually means replacing or retrofitting a gate on a home built between the 1950s and 1980s, where the original galvanized frame has spent decades in salt-laden air off the Lake Worth Lagoon. We’re Archway Gate Repair, and we’ve served Lantana since 2011, working on older sliding and swing driveway gates that inland technicians rarely see in this condition. Our work covers full gate replacement, retrofitting manual gates with modern openers, and rebuilding what’s worth saving. Call (855) 360-5306 for a gate company that knows the difference between a Lantana salt-corroded hinge and a simple alignment fix.
Why Lantana Homes Are Different
Lantana is a small, older coastal town on the Lake Worth Lagoon, and much of the gate work here is on aging single-family and small-multifamily properties built decades ago. That means the typical Lantana gate call is not a brand-new luxury install. It’s a worn sliding or swing driveway gate that has been fighting salt air, sea spray, and hurricane-season wind since the Reagan administration.
The corrosion factor is the defining difference. Properties near the water and along Ocean Avenue show the fastest operator-motor and hinge degradation from constant salt exposure. Steel gates rust through at the bottom rail, hinges seize, and first-generation automatic openers fail from moisture intrusion into the control board. Many of these gates are original galvanized or early aluminum frames, and the hardware was never spec’d for a marine environment.
Hurricane season adds another layer. Wind-driven rain and occasional flooding stress gate anchors, posts, and motors. We routinely see gates that still work but have developed a lean because the post footing has shifted in sandy, saturated soil. Lantana jobs are less about “what’s the newest gate” and more about “what will actually hold up here.”
Styles & brands we work with
Our Main Lantana Services
Most Lantana calls come down to two things: a gate that has stopped working correctly and needs repair, or an electric gate system that has lost its automation. Here’s how we handle both in Lantana.
Gate Repair in Lantana
Lantana’s older manual and first-generation automatic gates fail in predictable ways: rusted hinges, sagging frames, broken rollers on sliding tracks, and posts that have shifted out of plumb. We work on the brand already on your property, diagnose the actual failure point, and repair first rather than defaulting to replacement. That matters when the gate is original to a mid-century home and the homeowner wants to keep the look. See what’s involved on our Gate Repair in Lantana page.
Electric Gate Repair in Lantana
Electric gate repair in Lantana is a specialty, not an add-on. We diagnose motors, control boards, safety loops, and wiring on LiftMaster, FAAC, BFT, DoorKing, and other systems. Salt air corrodes terminal connections and circuit boards faster here than anywhere inland, so Lantana electric gate failures often look like “dead opener” but are really moisture and corrosion issues. Electric Gate Repair in Lantana covers the full scope, including safety sensor alignment and operator replacement.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Lantana
Gate installation in Lantana is rarely a simple swap. Most projects involve removing a rusted gate and operator from a mid-century or late-20th-century property, assessing whether the existing posts can be reused, and installing a new gate that can stand up to salt air and storm-season stress. We handle this as a repair-first company, which means we will tell you honestly if your existing gate can be rebuilt instead of replaced. For full details on what we install, see Gate Installation.
Automatic Gate Installation
Signs you need it
You’re manually opening a driveway gate every day because the original operator is dead or the gate was never automated.
What it costs in Lantana
Automatic gate installation in Lantana typically runs between $3,200 and $8,500 depending on gate size, operator type, and whether new posts or a concrete pad are required.
How we do it
We measure the opening, check post depth and condition, recommend an operator matched to gate weight and cycle frequency, then install the motor, arms, safety sensors, and control wiring.
Driveway Gate Installation
Signs you need it
The current gate is rusted through at the frame, sags beyond adjustment, or no longer closes securely against the latch or stop.
What it costs in Lantana
A new driveway gate in Lantana generally runs $2,800 to $12,000 including removal of the old gate, steel or aluminum frame, and hardware.
How we do it
We remove the old gate, set or reinforce posts, hang the new gate, adjust swing or slide travel, and confirm the latch and stops align before finishing.
Sliding Gate Installation
Signs you need it
You need to replace a worn sliding gate, or a narrow Lantana driveway makes a swinging gate impractical.
What it costs in Lantana
Sliding gate installation in Lantana typically falls between $3,000 and $9,500, with track condition and motor horsepower as the main variables.
How we do it
We set the track or cantilever rollers, mount the gate, install the operator and rack, then test full travel with safety stops in place.
What Gate Installation Costs in Lantana
| Item | Typical range in Lantana |
|---|---|
| Automatic gate installation | $3,200 – $8,500 |
| Driveway gate installation | $2,800 – $12,000 |
| Sliding gate installation | $3,000 – $9,500 |
Does a new gate in Lantana need to be corrosion-resistant?
Yes. Powder-coated aluminum or galvanized steel with stainless hardware is the minimum for Lantana’s salt air. Call (855) 360-5306 and we’ll spec the right materials for your distance from the water.
How long does gate installation take in Lantana?
Most Lantana installations take one to two days on site, after materials arrive. We quote the full timeline and price before any work starts. Call (855) 360-5306 for a free measure and estimate.
Brands We Service in Lantana
We work on the brand already on your property. In Lantana, that’s commonly LiftMaster, FAAC, Elite, and Mighty Mule on older automatic systems, plus a mix of no-name manual gate hardware from decades past. We stock common boards, arms, and safety sensors for faster turnaround on our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Lantana, FL
| Service | Typical range in Lantana |
|---|---|
| Gate repair | $180 – $2,500 |
| Electric gate repair | $225 – $2,500 |
| Automatic gate installation | $3,200 – $8,500 |
| Electric gate installation | $3,200 – $12,000 |
| Driveway gate installation | $2,800 – $12,000 |
| Sliding gate installation | $3,000 – $9,500 |
| Gate opener repair | $225 – $1,200 |
| Gate motor replacement | $450 – $2,200 |
| Gate opener installation | $750 – $2,500 |
| Gate hinge repair | $180 – $650 |
| Gate wheel replacement | $180 – $550 |
| Control board replacement | $350 – $1,500 |
In Lantana, the two biggest price drivers are salt-corrosion damage and post condition. Severely rusted posts often need new footings, and that adds labor. Every job is quoted and agreed in writing before any work starts, so the number you approve is the number you pay.
Neighborhoods We Serve in Lantana
We work across Lantana’s 33462 ZIP code, from the older streets west of I-95 to the lagoon-side neighborhoods along Ocean Avenue. Most of the gates we see are on mid-century single-family lots and small condo or duplex properties. We can typically reach any Lantana address the same day for repair calls.
- Ocean Avenue area
- Lake Worth Lagoon waterfront
- Hypoluxo Road corridor
- West Lantana neighborhoods
- Small multifamily and condo properties
Service Area – Cities Near Lantana
Archway Gate Repair serves Lantana and the surrounding Palm Beach County communities, including South Palm Beach, FL right on the ocean, Hypoluxo, FL on the lagoon, Atlantis, FL to the west, and Seminole Manor, FL just south of Lantana. We’re familiar with the gate systems and coastal conditions across this whole stretch of the county.
Serving Lantana, FL — Our Local Coverage Area
We’re based in the Lantana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lantana
For gate repairs, we can usually reach a Lantana address the same day, often within a few hours for an emergency like a gate stuck open or a failed opener. Installations and full replacements are scheduled after a free measure and written estimate.
Most straightforward gate replacements on existing posts do not require a building permit in Lantana, but new posts, footings, or electrical runs can trigger permitting depending on scope and location. We’ll tell you before work begins if your project needs one. Call (855) 360-5306 to discuss your specific property.
Yes. That’s the point of hiring a gate specialist. We handle the entire system from the motor to the hinge: gate, tracks, hinges, posts, opener, control board, safety sensors, and wiring. You won’t need to coordinate a second contractor for the electrical side.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lantana Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Craig Barrett"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Ernesto Flores"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Roger Ziegler