Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Lantana, FL | Archway Gate Repair
We repair Ghost Controls gate openers throughout Lantana, and we also provide Ghost Controls repair in Atlantis for properties just south of here. We’re the independent service crew that works on the brand already bolted to your property, not the crew that tries to sell you a different one. Most Ghost Controls calls we run in Lantana share one root cause: salt air eating at control boards, terminals, and hinge hardware far faster than the same units fail inland. If your Ghost Controls opener is dead, intermittent, or reversing when it shouldn’t, call us at (855) 360-5306 and we’ll diagnose it before quoting anything.

Why Lantana Residents Choose Us for Ghost Controls Service
Nelson Arrieta, our owner, grew up around South Florida gates and spent years at Miami Dade College’s North Campus learning electrical systems and industrial mechanics before working through every gate brand and operator type this coastal climate throws at a technician. That’s why our techs know Ghost Controls gear inside and out: the TDS series single swing arms, the TSL slide operators, the battery harnesses, the limit switch assemblies. We work on Ghost Controls units every week in Lantana, plus Ghost Controls repair in Hypoluxo just up the coast, and we know which failures show up near the water versus which ones are just age and wear.
We’re an independent repair operation, not factory-authorized, and we don’t pretend otherwise. What that means for you is simple: we diagnose the actual failure rather than defaulting to a full replacement quote. When an OEM part is the right fix, we source it. When the frame itself is the problem, we tell you straight. For full Ghost Controls sales & service, repair-first is how we work across every brand we touch.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Lantana
- Corroded control-box terminals on Ocean Avenue-adjacent properties. Salt-laden air off the Lake Worth Lagoon attacks the screw terminals and battery leads inside Ghost Controls control boxes. The gate goes intermittent or throws fault codes that don’t match any single component failure. We clean, reseal, and replace burned terminals.
- Limit switches and arm-mount hardware seizing after storm season. Hurricane wind and flood stress push gates out of alignment, and once the hardware starts to seize, a single swing operator fights itself on every cycle. We re-set arms and limits, and replace seized mount hardware so the motor isn’t overworking.
- Battery-backup and solar-charge failures after summer outages. Lantana gets its share of storm-related power drops. Ghost Controls battery backup units that sat in humid, salty enclosures often fail right when the grid goes down. We test, replace, and reseal battery harnesses so the gate still opens when the power doesn’t.
- Rusted hinges overloading a Ghost Controls opener sized for a lighter gate. Lantana’s older gates are often original galvanized or early aluminum frames. Once those hinges rust and bind, the opener draws more current and trips the safety reverse mid-cycle. We replace the hinge or the post hardware, and then verify the motor isn’t damaged from running overloaded.
- Intermittent no-open or random fault codes from water intrusion. Gaskets on Ghost Controls enclosures degrade faster in constant salt spray. Moisture gets in, the board gets confused, and the gate does nothing when you press the remote. We dry, test, and reseal enclosures, and replace boards when corrosion has gone too far.
Ghost Controls Service in Lantana: What Local Conditions Mean for Your Equipment
Lantana sits right on the Lake Worth Lagoon, and the persistent salt-laden air does things to gate hardware that inland Palm Beach County techs rarely deal with. Because the near-water and Ocean Avenue-area properties take constant salt spray, we routinely find Ghost Controls control boxes and hinge hardware corroded far faster than the same units on gates just a few miles west. An opener that might last twelve years in Wellington or Royal Palm Beach can show terminal corrosion and a seized hinge in six or seven years here, especially on older single-family homes with original galvanized frames and first-generation Ghost Controls kits. That’s the defining repair driver in this town: we’re not swapping out lightly worn parts on new luxury installs. We’re rehabilitating gates that have been breathing salt air for decades. It changes what we look for first, and it changes what actually fixes the problem long term.
We were called to an older single-family home near Ocean Avenue where a Ghost Controls single swing opener had gone intermittent: the gate would open and then fault out halfway. Our tech found green corrosion on the control-box terminals and a seized hinge on the gate leaf that was overloading the arm. We cleaned and resealed the connections, replaced the hinge, and re-set the arm and limits. The operator has run clean through the storm season since.
Ghost Controls Models & Products We Service in Lantana
We service the full Ghost Controls line that’s installed across Lantana, including the Heavy-Duty Single Swing (TDS series), Dual Swing (TDE series), Slide Gate operators (TSL series), and the solar and battery-backup accessory kits with AXS and AXP-series controls. For boards, arms, and battery harnesses where the OEM part is still in production, we use genuine Ghost Controls replacements. For the gate structure itself, hinges, posts, hardware, we use quality aftermarket components that stand up better to Lantana’s salt air than the originals often did.
If the operator housing and gearbox are sound, we repair in place. If the frame is rusted through or the gearbox is stripped, we tell you straight that replacement is the better money. We keep common Ghost Controls parts moving fast for Lantana jobs, and we also offer Ghost Controls service in Seminole Manor for nearby communities. We handle motor repair, battery backup work, and weld-and-rust repair on the gate itself, not just the operator.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Lantana
Ghost Controls repair pricing in Lantana depends on what failed and what the salt air has done to the surrounding hardware. A straightforward service call to re-set limits and clean terminals typically runs $95 – $180. Board or OEM part replacement usually falls between $150 – $375 depending on the part. Battery and solar-charge repairs average $120 – $300. Full motor or gearbox replacement on an older Ghost Controls operator can run $400 – $800 or more, which is when we’ll talk you through repair-versus-replace honestly.
Every price is quoted and agreed before any work starts. Estimates are free, and we’ll give you the line-item breakdown so you know exactly what you’re paying for. Call (855) 360-5306 for an exact quote on your Ghost Controls gate repair in Lantana.
Serving Lantana, FL — Our Local Coverage Area
We’re based in the Lantana area and know this community well, and we also handle Lantana Gate Repair calls throughout the surrounding neighborhoods. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Lantana
No. We’re an independent repair shop with deep hands-on experience on Ghost Controls operators, specifically the TDS, TDE, and TSL series. We use genuine Ghost Controls parts where the OEM component is still the right fix, but we’re not factory-authorized or endorsed. What you get is an honest, repair-first diagnosis without a brand agenda.
If the gate moves smoothly when you push it manually with the opener disengaged, your problem is in the operator. If it binds or squeals even when you push it by hand, the issue is the gate itself: hinge or track alignment. In Lantana we see both happen together all the time, because salt air seizes the hardware and then the struggling gate overloads the opener. We check both on every call.
Most Ghost Controls service calls are completed same-day once we’re on site. Terminal cleaning, limit re-setting, and hinge replacement are same-visit fixes. If we need to order a specific OEM board or harness, that usually adds a day or two. We’ll tell you before we start anything.
We service the TDS series heavy-duty single swing openers, TDE dual swing kits, TSL slide operators, and the AXS and AXP-series control accessories including solar and battery-backup kits. If it says Ghost Controls on the housing, we’ll open it up and tell you what’s actually wrong.
Most repairs run between $95 and $375 depending on parts and how far the corrosion has spread. Full motor or gearbox replacement can push past $500. Every quote is agreed before we start, and estimates are free. Call (855) 360-5306 for an exact price on your Lantana gate.
Service Areas Near Lantana
We run Ghost Controls service calls throughout Lantana and down the coastal corridor, including Lantana service area coverage for full gate repair. For properties further south, see our Ghost Controls service in South Palm Beach page, and for the Keys-adjacent side, Ghost Controls service in North Key Largo. We also handle calls in Hialeah Gardens, Hollywood, and Sunny Isles Beach.
Book Your Ghost Controls Service in Lantana Today
If your Ghost Controls opener is down, intermittent, or fighting itself on every cycle, call (855) 360-5306. We’ll get your electric gate back online fast, with a quote agreed before any work begins.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Lantana and surrounding coastal Palm Beach County. If I’ve seen the brand, I’ve already seen the problem.