Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in West Palm Beach, FL
Gate installation in West Palm Beach means working with properties that range from 1920s Mediterranean-revival estates in Flamingo Park to modern gated communities in the western reaches of the city. Archway Gate Repair has served West Palm Beach since 2011, and most jobs we take here involve either replacing salt-corroded ironwork or installing an automatic system that meets Florida’s wind-load codes. We’re a gate-only specialist, so the technician who shows up knows LiftMaster, FAAC, BFT, and DoorKing systems before the truck pulls into your driveway. Call (855) 360-5306 for a free estimate on gate installation in West Palm Beach.
Why West Palm Beach Homes Are Different
West Palm Beach sits close enough to the Atlantic that onshore breezes carry salt spray inland, especially along Flagler Drive and the intracoastal neighborhoods. We regularly see gate posts and hinges degraded by salt spray within a few years of installation. That corrosion works its way into rollers, track systems, and operator mounting points, which means a gate that looks fine from the street can be structurally compromised where it matters.
The housing stock compounds the challenge. Historic districts like Flamingo Park have original wrought-iron gates from the 1920s and 1930s, many with hinges that haven’t been touched in decades. Those need restoration, not replacement. Out west, the gated communities and HOAs lean on modern automatic driveway gates that must hold up to hurricane season and the strict wind-load and impact-product codes that come with it. In waterfront neighborhoods along Flagler Drive, we also see gates that must satisfy Miami-Dade County product-approval requirements for wind-borne debris. That’s a West Palm Beach reality, not a general South Florida one. The code applies here, and the right gate installation has to account for it from the anchor bolts up.
Styles & brands we work with
Our Main West Palm Beach Services
Most calls we get in West Palm Beach fall into two categories: a gate that’s physically failing, and a gate whose electric system has stopped responding. Each has its own page below.
Gate Repair in West Palm Beach
Repair work in West Palm Beach tends to split between mechanical failures on older gates and structural issues caused by salt and moisture. Hinges seize, posts shift in sandy soil, wheels wear against rusted track. On a 1920s Flamingo Park gate, the fix is often a custom hinge remount, not a full replacement. We diagnose first, then repair. That’s the difference between a specialist and a general contractor. For mechanical repair, sagging gates, broken wheels, or hardware replacement, see Gate Repair in West Palm Beach.
Electric Gate Repair in West Palm Beach
Electric gate repair in West Palm Beach is a core specialty for us, not an add-on. Humidity and salt air shorten the life of control boards and wiring connections, and we routinely find corroded terminals inside operators that were installed only a few years ago. Our technicians work on motors, sensors, safety loops, and control boards for LiftMaster, FAAC, BFT, Linear, and Viking systems. If your gate opens halfway, refuses to close, or trips its breaker, see Electric Gate Repair in West Palm Beach.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in West Palm Beach
Gate installation in West Palm Beach usually means one of two things: a property owner is replacing a gate that Hurricane-era salt and sun have finally finished off, or they’re adding an automatic gate to a driveway that never had one. In older neighborhoods near the intracoastal, we’re often working with custom wrought-iron that has to match a Mediterranean-revival home’s original look. In newer gated communities west of I-95, the job is usually a modern sliding or swing gate with a LiftMaster or BFT operator that has to meet the HOA’s specs and Florida’s wind-load requirements. Whatever the situation, we quote a fixed price before any work starts, and we’re a Gate Installation specialist, not a fencing company that installs gates on the side.
Automatic Gate Installation
Signs you need it
You’re still getting out of the car to open and close the gate by hand, or the current operator is more than ten years old and no longer responds to remotes or keypads reliably.
What it costs in West Palm Beach
Automatic gate installation in West Palm Beach typically runs $3,000 to $10,000 depending on gate length, operator brand, and whether the existing posts can be reused.
How we do it
We confirm the gate’s weight and duty cycle, then mount the operator, run the control wiring, set the limit switches, and program your remotes and keypad before testing the full open-close cycle several times.
Electric Gate Installation
Signs you need it
You’re installing a gate where none exists, or you’re replacing a mechanical gate with an automated system that needs new power, conduit, and safety edges.
What it costs in West Palm Beach
Electric gate installation in West Palm Beach typically ranges from $2,700 to $7,500, since the price depends on the power run distance, operator model, and whether a solar panel or transformer is required.
How we do it
We run a dedicated circuit to the operator location, set the posts or confirm the existing ones are sound, then install the opener, safety loops, photo eyes, and control board before programming the system.
Driveway Gate Installation
Signs you need it
Your current gate sags, drags on the pavement, or won’t hold its alignment, and the cost to rebuild the hardware approaches the price of a new gate.
What it costs in West Palm Beach
Driveway gate installation in West Palm Beach is generally $1,100 to $4,500, with custom fabricated gates running higher than stock single-swing models.
How we do it
We measure the driveway opening, check the existing posts for plumb and corrosion, then install the new gate, mount the hinges or track, and adjust everything until it moves cleanly without binding.
Sliding Gate Installation
Signs you need it
Your property has a narrow or sloped driveway where a swing gate can’t open properly, or the current sliding gate’s track has rusted through and the rollers are shot.
What it costs in West Palm Beach
Sliding gate installation in West Palm Beach typically runs $2,000 to $9,000, depending on the gate’s width, weight, and whether a cantilever system is needed to keep the track clear of debris.
How we do it
We set the track or cantilever rollers on a concrete pad, hang the gate, mount the operator and rack, then test the full travel while adjusting the end stops and safety sensors.
What Gate Installation Costs in West Palm Beach
| Item | Typical range in West Palm Beach |
|---|---|
| Driveway gate installation | $1,100 – $4,500 |
| Electric gate installation | $2,700 – $7,500 |
| Automatic gate installation | $3,000 – $10,000 |
Does a new gate installation in West Palm Beach require a permit?
Yes, in most cases. West Palm Beach requires a permit for any new gate installation, and an automatic gate also needs an electrical permit for the power run. We can walk you through the process and confirm what your specific property requires. Call (855) 360-5306 to talk through your project.
Can you match the style of an older West Palm Beach gate?
Yes. We’ve installed replacement gates in Flamingo Park and other historic districts where the original ironwork had to be matched in design and finish. We work with local fabricators who can replicate the original details instead of forcing a stock gate onto an old property.
Brands We Service in West Palm Beach
Archway Gate Repair is factory-familiar with the gate systems most common in West Palm Beach, including BFT, Linear, Viking, and Ghost Controls. We carry common control boards, remotes, and safety sensors in stock, which shortens the wait on most West Palm Beach repairs. For a fuller picture of the brands we work on, see our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in West Palm Beach, FL
| Service | Typical range in West Palm Beach |
|---|---|
| Manual gate repair | $100 – $400 |
| Electric gate repair | $180 – $450 |
| Driveway gate installation | $1,100 – $4,500 |
| Electric gate installation | $2,700 – $7,500 |
| Automatic gate installation | $3,000 – $10,000 |
| Sliding gate installation | $2,000 – $9,000 |
| Gate hinge replacement | $80 – $150 per hinge |
| Gate wheel and roller replacement | $60 – $120 per wheel |
| Control board replacement | $280 – $550 |
| Safety sensor repair | $150 – $350 |
Salt corrosion drives up costs faster in West Palm Beach than inland: a hinge that’s seized from rust takes longer to cut out and remount than one that comes apart cleanly. Permit fees and structural upgrades for wind-load compliance also add to the total, particularly on automatic gates. Whatever the job, the price is quoted and agreed before any work begins, so there’s no invoice surprise at the end.
Neighborhoods We Serve in West Palm Beach
Archway Gate Repair covers all of West Palm Beach, including the ZIP codes 33416, 33417, 33419, and 33420. We work throughout the city, from the historic streets of Flamingo Park to the gated communities west of I-95.
- Flamingo Park
- Prospect Park
- El Cid
- Grandview Heights
- River Walk
We can usually reach most West Palm Beach addresses the same day or next morning, depending on call volume.
Service Area – Cities Near West Palm Beach
Our gate repair and installation service reaches the communities around West Palm Beach as well. We work in West Gate, FL, just south of the city, and in Haverhill, FL to the west. We also cover Lake Belvedere Estates, FL and Plantation Mobile Home Park, FL, where many homes have automatic driveway gates that need the same salt-air and hurricane-code care we handle every day in West Palm Beach.
Serving West Palm Beach, FL — Our Local Coverage Area
We’re based in the West Palm Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in West Palm Beach
For most West Palm Beach addresses, we can have a technician out the same day or next morning. Electric gate failures get priority, since an automatic gate stuck open is a real security issue. Call (855) 360-5306 for current scheduling in your neighborhood.
Many gated communities in and around West Palm Beach have architectural review boards that approve gate styles, finishes, and operator placement before installation. We’re used to working with those requirements and can provide spec sheets or material samples when the HOA asks for them.
Yes, and faster than most people expect. Unprotected steel hardware near the intracoastal can show rust within two to three years. We use marine-grade finishes, zinc-primed hinges, and stainless fasteners on installations near the water to slow the corrosion and extend the gate’s life. A call to (855) 360-5306 gets you a free estimate, quoted before any work starts.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What West Palm Beach Customers Say
"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Ernesto Flores"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Roger Ziegler"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Tyrone Carter