Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Delray Beach
Electric gate repair in Delray Beach is different from the work we do a few miles south in Broward or up in Palm Beach Gardens. The salt air off the Atlantic attacks hinges and control boards differently depending on whether you’re east of I-95 or back in the country-club communities. If your gate is stuck open, won’t close, or the motor hums but nothing moves, we can usually get a technician to your property the same day. Call (855) 360-5306 and tell us what brand of operator you have. We’ll know what to bring before we leave Miami Gardens.
We work on the brand already on your property. Most Delray Beach homeowners don’t know their gate operator model number, and they shouldn’t have to. When you describe the symptoms and we see the setup, we can diagnose it fast. Electric gate back online is what you need. That’s what we do.
Why Archway Gate Repair Is Delray Beach’s Preferred Electric Gate Repair Company
Archway Gate Repair is a gate-only shop. We don’t build fences, we don’t hang garage doors, and we don’t patch stucco as a side job. Every call we take in Delray Beach is about a gate: a driveway gate that won’t open, a pedestrian gate that binds, a keypad that stopped talking to the control board. That focus means our technicians have seen your exact failure before, often on the same brand, sometimes in the same development.
Nelson Arrieta built the company around a repair-first approach. When a general handyman looks at a dead operator, they usually quote a full replacement. When we look at it, we check the safety loops, the transformer, the limit switches, and the board. Repair first, replace only when necessary. That’s not a slogan for us. It’s how we keep Delray Beach customers from paying for work they don’t need.
We carry common parts for LiftMaster, FAAC, BFT, and Linear systems so turnaround is faster. And because we cover gates from the motor to the hinge, one truck can sort out an electrical fault and a sagging hinge on the same visit. For gated communities in 33447 and 33448, that matters: board members want the main entry working again before residents start calling the management office.
Styles & brands we work with
Electric Gate Motor in Delray Beach
An electric gate motor in Delray Beach works hard year-round: sun, salt, humidity, and the annual threat of a named storm. When a motor fails here, it’s rarely just a dead capacitor. The coastal environment accelerates wear on the gearbox, the motor brushes, and the limit switches. In the beachside ZIP 33483, we regularly see motors seized by a combination of rusted armature shafts and salt-caked brushes. You can hear it: the motor hums, but the arm doesn’t move.
Motor Diagnosis and Repair
We test the capacitor, incoming voltage, and amp draw before opening the motor housing. On most slide gate operators from the 1990s and 2000s, the failure is a worn gearbox or a failed start capacitor, not the motor itself. Replacing a capacitor runs $95 – $165. A gearbox rebuild, depending on the model, runs $280 – $460.
Motor Replacement and Retrofits
If the motor itself is gone, replacement runs $550 – $950 for a residential swing or slide operator motor on most common Delray Beach systems. For older operators west of I-95 where the original motor is obsolete, we retrofit modern motors into the existing track and posts. That usually runs $900 – $1,400 depending on the gate weight and existing operator footprint. We leave the gate mechanically sound and the operator to spec.
Gate Access Control in Delray Beach
Gate access control in Delray Beach spans everything from a single keypad at a driveway entrance on a half-acre lot off Linton Boulevard to full keypad, remote, and loop systems at gated communities in the western ZIPs. When the access control fails, the gate does not know who is asking to get in. Residents get locked out, delivery drivers pile up at the visitor lane, and the board gets angry calls. Our work here is as much electrical diagnostics as it is mechanical repair.
Keypad and Remote Systems
A dead keypad is often a power or wiring fault rather than a failed keypad. We trace voltage to the keypad, check the wire at the hinge side, and test the receiver board. Keypad replacement runs $180 – $340 installed, depending on the model. Remote receiver repair or replacement runs $140 – $260.
Safety Loops and Control Boards
Control board replacement is the most common electric gate repair we do in Delray Beach, especially after a storm surge or a close lightning strike. Boards run $220 – $480 depending on the brand. A failed safety loop that won’t detect a vehicle and keeps the gate from closing runs $160 – $320 to locate and repair. In Delray Beach’s older gated developments, many loop systems are original to the 1980s and failing at the saw-cut wire splice, not the detector itself.
Trusted Brands We Service in Delray Beach
Our Delray Beach trucks carry parts for LiftMaster, FAAC, BFT, and Linear. These are the brands we see most often from the historic district near Atlantic Avenue out to the country-club developments west of I-95. Knowing the brand matters because every one of them has a specific failure profile. A LiftMaster Elite slide operator doesn’t fail the way a BFT Aries does. We stock the small parts, boards, and receivers that keep the same-day repair rate high for Delray Beach customers. And because we work on both the mechanical and electrical side, we don’t have to send a second company out when the hinge is as much to blame as the motor.
Common Electric Gate Repair Problems We See in Delray Beach Homes
- Corroded hinges and fasteners in beachside ZIP 33483: Salt-laden onshore breezes eat gate hardware faster than anywhere west of I-95. Gate leaves sag and bind because the hinge bearings are rusted solid, and the fix is re-hanging the leaf, not just spraying lubricant.
- Obsolete control boards and gearboxes in 1980s – 90s developments: Many driveway gates west of I-95 still run original slide and swing operators from brands that no longer support the board. We retrofit modern boards and gearboxes into the legacy track, saving the gate and the cost of a full replacement.
- Shifted masonry or concrete posts in the historic districts: Sandy soil near Atlantic Avenue means original gate posts move. A wrought-iron pedestrian gate that binds at the latch is often a post that leans, not a gate that warped. We re-plumb the post and re-hang the gate.
- Storm-damaged safety loops and wiring: Saturated soil and floodwater from hurricane season short out loop detectors and corrode connections inside operator housings. Gates that worked before a storm and won’t close after it usually have a wet or shorted safety loop.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Delray Beach, FL
Most Delray Beach electric gate repairs run $160 to $950 depending on what failed. A keypad repair is usually $180 – $340. A safety loop repair runs $160 – $320. Control board replacement runs $220 – $480. Motor work ranges from $95 for a capacitor up to $1,400 for a full retrofit of an obsolete operator into an existing track. The price is quoted and agreed before any work starts. When we diagnose a fault, we show you the failed part and explain the number before we touch a tool. Call (855) 360-5306 for a free estimate. We don’t charge to come out and tell you what’s wrong.
We Also Serve Cities Near Delray Beach
Our service area around Delray Beach includes Kings Point, Highland Beach, Villages of Oriole, and Boynton Beach. If your gate problem is in one of these neighboring communities, the same Electric Gate Repair team covers the call. We don’t bounce between far-flung service zones; we stay close to the coast and the communities that need us.
Serving Delray Beach, FL — Our Local Coverage Area
We’re based in the Delray Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Delray Beach
In Delray Beach, it’s usually both, and which one matters changes by neighborhood. In the historic district near Atlantic Avenue, we most often find the original masonry or concrete post has shifted in the sandy soil, which throws the gate leaf out of line and binds the hinges. In beachside ZIP 33483, the hinge bearings themselves are often rusted from salt air. We diagnose both on the same visit. Call (855) 360-5306 and we’ll tell you which one is your problem.
Yes. Many of the original slide and swing operators in the communities west of I-95 are 30 to 40 years old, and the control boards and gearboxes are not made anymore. We retrofit modern electronics and motors into the existing track and posts where possible. That saves money and avoids the disruption of a full gate replacement when the gate itself is fine.
Salt air causes accelerated rust on hinges, fasteners, motor armatures, and control board connections. Gates near the ocean in 33483 fail electrically and mechanically sooner than the same equipment inland does. We can replace corroded fasteners with marine-grade stainless, install upgraded hinge bearings, and spec operator housings with better sealing. Preventive servicing once a year catches the worst of it before a hinge seizes or a board shorts out. For an exact quote on your gate, call (855) 360-5306.
Usually yes, the same day. The most common post-storm failure in Delray Beach is a shorted safety loop or a wet control board. We test the loop detector first, because it is the cheapest and fastest failure to confirm. If the board is soaked, we replace it on the spot when we have the model in stock. Same-day service is the goal for any storm-related gate outage.
Yes. Automatic gates must meet UL 325 safety requirements, which include entrapment protection like photoelectric sensors, reversing edges, or both. In Delray Beach, this matters because many older gates installed before the current safety standards were enforced never had these upgrades. We check safety photocells, safety edges, and force settings on every electric gate repair we do. Call (855) 360-5306 if you want your existing gate checked.
Why Delray Beach Needs a Gate Specialist, Not a Generalist
Delray Beach’s gate repair market is split between two very different sets of problems. West of I-95, the gated country-club and golf-course communities in 33447 and 33448 are full of hurricane-rated driveway and privacy gates. These gates have wind-load-rated hardware, heavy slide gates, and redundant safety systems. But many are original to the 1980s and 1990s, so the control boards and gearboxes are obsolete. The repair is not swapping a gate; it’s retrofitting a modern operator into a legacy track, reusing posts that are still structurally sound, and making sure the system will perform at wind-load spec. That’s electric gate work with storm-readiness in mind, not driveway convenience only.
Five miles east, near Atlantic Avenue, the situation flips. The historic districts in 33482 and 33483 are full of heritage aluminum and wrought-iron pedestrian gates, many hung on original masonry or concrete posts from the 1920s through the 1950s. The sandy soil around Delray Beach shifts. Posts move. Gates bind at the latch. These are not motor failures; they are structural gate repair jobs with a different skill set.
In the historic district near Atlantic Avenue, our crew repaired a binding wrought-iron pedestrian gate caused by shifted masonry posts in sandy soil. We re-plumbed the posts and re-hung the gate with a new hinge post, then installed a LiftMaster operator with safety photocells. The gate now opens smoothly and meets UL 325 entrapment protection requirements.
That split is the reason generalist companies struggle here. A fencing contractor that “does gates too” will replace the gate. A handyman will replace the operator. Neither will see that the post moved and the gate leaf needs re-hanging before any electronic work makes sense. We do both in one visit.
Beachside properties in 33483 add a second layer: every hinge, fastener, and operator housing is under constant attack from salt-laden onshore breezes. Corrosion is not a cosmetic problem out there. A rusted hinge bearing seizes, the gate leaf sags, and the motor burns out trying to move a gate it can’t muscle. We replace hinges with marine-grade hardware when we work east of the Intracoastal. That is not a upsell. It is local knowledge.
Call (855) 360-5306 if your gate is misbehaving anywhere in Delray Beach. We’ll diagnose it quickly, quote it honestly, and fix it correctly.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Delray Beach and the surrounding coastal communities.