Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Tedder
Electric gate repair in Tedder usually means one of three things: a salt-corroded rack on a slide gate, a control board that’s finally given out on a 1980s operator, or a hinge post that’s shifted in sandy coastal soil and thrown the whole gate out of level. We fix all three, and we fix them correctly the first time. Archway Gate Repair works on the brand already on your property, from LiftMaster to FAAC to Mighty Mule, and we stock the parts Tedder gates actually need, not the parts a warehouse thinks they need. Call (855) 360-5306 and we’ll diagnose the problem over the phone, often before the truck even rolls.
Why Archway Gate Repair Is Tedder’s Preferred Electric Gate Repair Company
Tedder sits in the coastal Pompano Beach/Deerfield Beach corridor, and the gates here don’t fail the way they do ten miles inland. Salt-laden ocean air works on every hinge, latch, and roller. Hurricane-season wind loads stress posts and operators. And the mid-century homes that dominate Tedder’s housing stock, mostly built between the 1950s and 1970s, often still run their original gate infrastructure. We know that because we work here regularly. Our Electric Gate Repair team has pulled corroded racks off slide gates in Tedder, replaced control boards on legacy operators, and reset posts that have shifted in the sandy soil under concrete-block walls. Homeowners and property managers in Tedder call us because we recognize the equipment before we touch it, and because we explain what’s actually wrong in plain language. Nelson Arrieta, who leads our team, has built Archway around a simple rule: diagnose the gate, not the invoice. That’s why repair is our first recommendation, and replacement only comes up when it’s genuinely the cheaper long-term answer.
Styles & brands we work with
Commercial Gate Operator in Tedder
A commercial gate operator in Tedder handles far more cycles per day than a residential unit, and the salt air here shortens the life of every moving part between the motor and the gate leaf. When a commercial operator fails at a condo complex off Dixie Highway or a small business property near Federal Highway, the gate doesn’t just inconvenience residents, it locks people out or swings open and stays there. The job typically involves diagnosing whether the failure is in the operator itself, the control board, the safety loops in the pavement, or the gate hardware binding against corroded posts. A commercial gate operator repair in Tedder generally runs $450 to $1,400 depending on whether we’re replacing a control board, a motor, or the entire operator head. Full operator replacement on a commercial swing or slide gate runs $2,200 to $5,800. We quote the full price before any work starts, and we don’t change it unless we find something that genuinely changes the scope, in which case we stop and call you first.
Legacy Operator Retrofits
Many Tedder commercial properties still run DoorKing or Viking operators installed in the 1990s or early 2000s. The boards on those units are often still repairable, but they lack modern UL 325 safety features. We can retrofit photocells, edge sensors, and newer control boards onto existing operators without replacing the whole system.
Salt Corrosion on Commercial Racks
Slide gates along Tedder’s coastal streets develop a specific problem: the rack and pinion corrode unevenly, and the gate starts binding mid-travel. Operators overheat trying to push through the resistance. We see it constantly. Replacing the rack with galvanized or stainless material, and adjusting the operator, solves the binding permanently rather than patching the symptom.
Gate Opener Repair in Tedder
Gate opener repair in Tedder often comes down to one question: is the operator actually the problem, or is it the gate? The older swing gates in Tedder, especially on homes built in the 1960s and 70s, frequently sag because their original hinge posts have shifted in the sandy coastal soil. When that happens, the opener strains against a gate that no longer swings level, and the gears inside the operator burn out. We diagnose the whole system, not just the opener. A typical gate opener repair in Tedder runs $220 to $520 for board repairs, limit switch adjustments, or gear replacement. A full opener replacement on a residential gate runs $850 to $2,400 including labor and the unit. If the hinge post is the root cause, we’ll quote that separately and explain exactly why the opener failed.
Salt Air and Opener Longevity
Tedder’s subtropical marine climate means opener housings, wiring terminals, and even the screws holding the cover on corrode faster than they would in Fort Lauderdale or inland Broward. We’ve pulled open LiftMaster and FAAC units in Tedder where the control board looks fine from the outside but the terminal strips have turned green. That’s a Tedder problem, and we fix it with dielectric grease, sealed connections, and corrosion-resistant hardware.
Obsolete Control Boards
Homes in Tedder built before 1995 often still have their original operators with boards that are no longer manufactured. When those boards fail, we don’t guess at a replacement. We either repair the board at the component level, or we source a compatible retrofit board that fits the existing motor and wiring. Sometimes the honest answer is that a new operator is cheaper than repairing a 35-year-old board three times. We’ll tell you which situation you’re in.
Trusted Brands We Service in Tedder
We work on the brand already on your property. In Tedder, that means a lot of LiftMaster swing operators on mid-century homes, Mighty Mule units on smaller driveway gates, FAAC hydraulic operators on older condos, and Elite slide gate systems on commercial properties. Our techs are factory-familiar with nine major brands, which means we know the specific failure points of each system before we arrive. That brand knowledge translates to faster diagnosis, fewer parts guesses, and a repair bill that reflects labor done, not time spent figuring things out. We keep common boards, remotes, and corrosion-resistant hardware stocked for Tedder service calls, so we’re not waiting on a parts truck from Miami when your gate is hanging open.
Common Electric Gate Repair Problems We See in Tedder Homes
- Shifted hinge posts from sandy coastal soil. Tedder’s mid-century homes often have original concrete-block gate posts set in shallow footings. Decades of rain and soil movement leave them leaning, which throws the gate off level and destroys operators. We reset the post or add a proper footing, then rehang the gate with stainless hardware.
- Corroded rack and pinion on slide gates. Salt air from the Atlantic accelerates corrosion on exposed rack teeth. The gate binds, the operator overheats, and eventually the motor fails. We replace racks with galvanized or stainless material and realign the drive.
- Obsolete control boards without safety features. Pre-1995 operators in Tedder often lack photocells and edge sensors required by current UL 325 standards. These boards fail unpredictably and create entrapment risks. We retrofit modern safety components onto legacy systems whenever feasible.
- Seized hinges and latches from salt spray. Even when a gate looks fine from the street, the hinges may be rusted solid underneath. We see this constantly in ZIP 33064. Replacing mild-steel hardware with stainless or galvanized fittings prevents the problem from returning next season.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Tedder, FL
Here’s what Tedder homeowners and property managers can expect to pay. Gate opener board repair: $220 to $520. Gate motor replacement: $450 to $950. Full residential operator replacement including labor: $850 to $2,400. Commercial gate operator repair: $450 to $1,400. Hinge post reset and gate rehang: $400 to $900 depending on footing depth and wall material. Rack and pinion replacement on a slide gate: $350 to $800. These are honest Tedder market ranges, not bait numbers. The final quote depends on your gate’s size, the operator model, and the condition of the posts. What we promise: the price is quoted and agreed before any work starts, and estimates are free. Call (855) 360-5306 for an exact number on your gate.
We Also Serve Cities Near Tedder
Archway Gate Repair handles electric gate service throughout northeast Broward. Beyond Electric Gate Repair in Tedder, we regularly work in Lighthouse Point, Pompano Beach Highlands, Kendall Green, and Hillsboro Beach. If your gate is down and you’re not sure whether you’re in our area, call (855) 360-5306 and we’ll confirm it in thirty seconds.
Serving Tedder, FL — Our Local Coverage Area
We’re based in the Tedder area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Tedder
You can sometimes replace just the board, but on 1980s operators the boards are usually obsolete, and the ones you find on eBay are pulled from other failed units. We’ll tell you honestly: if the board is available new or we can repair yours at the component level, that’s the cheaper fix. If you’re on your third board in five years, a new operator with modern safety features is almost always the better long-term investment. Call (855) 360-5306 and we’ll assess your specific model before recommending anything.
Because the problem isn’t lubrication, it’s corrosion. Salt air in Tedder eats the teeth on the rack and pinion, and once the metal is pitted, no amount of grease stops the binding. The fix is replacing the rack with galvanized or stainless material and realigning the operator. Lubrication masks it for a week or two, then the operator starts overheating again. We see this constantly along the coastal corridor.
Look at the gap between the gate leaf and the post. If it’s wider at the top than the bottom, or the gate drags on the ground at the outer edge, the post has likely shifted. Tedder’s sandy soil and shallow 1960s-era footings make this common. You may also see cracks in the concrete-block post itself or hear the opener grinding. Don’t wait, a sagging gate destroys the operator’s gears. We can reset the post and rehang the gate properly.
Yes. Any automated gate installed or substantially modified after the current UL 325 standards took effect must have photocells or contact edges to prevent entrapment. Many Tedder gates from the 1980s and 1990s were installed before these rules existed. If we service your gate, we’ll flag missing safety sensors and retrofit them onto the existing operator wherever possible. It’s the law, and it prevents serious injuries.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers the vast majority of residential and commercial gates in Tedder, including the legacy units still running on mid-century homes. If you’re not sure what brand you have, call (855) 360-5306 and describe the gate; we’ll usually identify it from your description.
Call Archway Gate Repair for Electric Gate Service in Tedder
If your gate is down, sagging, binding, or refusing to close, call (855) 360-5306. We’ll ask a few questions, give you a straight answer about what’s wrong, and schedule a service visit to Tedder that fits your schedule. Free estimates, upfront pricing, and repair before replacement. From the motor to the hinge, we handle the whole system.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Tedder and northeast Broward County.