Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Tequesta
Electric gate repair in Tequesta typically runs $180 – $440 for motor and control board work, and we can reach most homes in ZIP code 33469 the same day you call. Most failures here trace back to one of two causes: salt-air corrosion on riverfront and Intracoastal lots, or water intrusion after a summer thunderstorm. Our techs live in the Palm Beach County market and know exactly what those conditions do to LiftMaster boards, FAAC arms, and Mighty Mule hinges. If your gate is stuck, sagging, or refusing to open, call (855) 360-5306 and we’ll diagnose it over the phone before we even roll a truck.
Archway Gate Repair is a gate-only shop. We don’t do pergolas, we don’t hang drywall, and we don’t “also” fix fences. Our entire workday is gate motors, gate openers, gate hinges, and the low-voltage wiring that makes them run. That focus matters when you’re dealing with a corroded operator 200 feet from the Loxahatchee.
Why Archway Gate Repair Is Tequesta’s Preferred Electric Gate Repair Company
We work on the brand already on your property. When a Tequesta homeowner tells us their gate won’t budge, the second question after “what’s the address?” is “what operator is on it?” Most of the time we already know the failure point for that specific unit before we open the cover. LiftMaster swing arm. FAAC hydraulic. Mighty Mule chain-drive. Each one fails differently, and in Tequesta they fail faster because of where they’re mounted, not because of how they’re made.
Tequesta has a mix of gate stock you won’t find in inland communities. On the west side you’ll see 1980s chain-link and painted steel posts. Along the river and Intracoastal there are custom ornamental aluminum gates, cedar driveway gates, and Mediterranean-style automatic driveway systems. One street can span forty years of gate technology. Our technicians can source parts for both a discontinued FAAC control board and a modern Ghost Controls opener because we keep legacy-component suppliers and current distributor accounts active at the same time.
Our founder Nelson Arrieta has built the company around repair-first discipline. That means when a gate can be fixed honestly for $250, that’s the quote you get. We don’t default to a $6,000 replacement because it’s an easier sale. Repair first, replace only when necessary.
Styles & brands we work with
Gate Opener Repair in Tequesta
Gate Opener Repair in Tequesta usually means the motor, the arm, the control board, or the low-voltage feed has failed, and half the time the real culprit is corrosion or water. Salt-laden onshore breezes deposit chloride directly on operator arms and boards, especially on short-driveway lots near the Loxahatchee where the unit sits closer to the water than it would on a sprawling inland property. A gate opener that would last 12 years in Palm Beach Gardens can fail in 7 in Tequesta’s riverfront air if it wasn’t built with marine-rated internals.
You know it’s the opener when the gate starts moving slower, makes a grinding noise at the midpoint, or trips its breaker during a storm. You also know it when the keypad and remotes work but nothing physically moves. Those are operator-level failures, not hinge problems.
Operator Arm and Motor Replacement
Swing gate arms corrode along the seam where the housing meets the extension tube. On Intracoastal properties we see rust staining down the arm within three years of installation. We replace seized arms with marine-grade stainless or powder-coated units and reseal the housing gasket. Motor replacement on a Tequesta single-family gate is $225 – $490 depending on the operator.
Control Board Diagnostics
Control boards die quietly. Corrosion bridges the low-voltage terminals, the board shorts, and the gate goes dead. We bench-test the board first, which means you’re not paying for a motor swap when the board was the problem. Diagnosed, not guessed. A replacement board for a DoorKing, Elite, or older FAAC system in Tequesta costs $175 – $385 including programming.
Automatic Gate Repair in Tequesta
Automatic Gate Repair in Tequesta comes down to three things: what’s feeding the gate power, what’s telling it to open, and what’s physically holding it in place. In older ranch homes on the west side, we frequently find extension cords powering gate operators, which is a fire risk and a failure waiting to happen. On newer coastal builds, the problem is almost always a safety sensor knocked out of alignment or a board that took a voltage spike during a lightning storm.
After a heavy summer thunderstorm in Tequesta, automatic gate calls spike. Wind-driven rain pushes through the control box gaskets, low driveway areas pool water around the operator base, and photo-eye sensors get struck by flying palm fronds. We get the electric gate back online by drying out the board, replacing any burned relays, resetting limit switches, and then testing the full open-close cycle ten times before we leave.
Safety Sensor and Photo-Eye Realignment
Sensors at Tequesta gates get knocked out of level by wind and storm debris. When a photo-eye is shaded or misaligned, the gate reverses mid-cycle or refuses to close. We realign and re-aim sensors, clean the lens faces, and test entrapment protection under load. This is part of every automatic gate repair we perform, not an add-on line item.
Power Runs and Relay Checks
We test the 120V feed at the outlet, then the 12V or 24V output at the transformer. A gate operator with a weak relay will open partway, stop, and restart. That’s the kind of intermittent failure that burns out motors over time. We’d rather replace a $45 relay than watch a $400 motor cook itself.
Trusted Brands We Service in Tequesta
We’re factory-familiar with LiftMaster, FAAC, Mighty Mule, and six other major brands installed across Tequesta. That means we know a FAAC hydraulic arm needs different bleeding procedures than a LiftMaster electromechanical swing, and we know Mighty Mule’s older chain-drive units have specific travel-limit quirks. We keep common parts on the truck for Tequesta service calls: relays, photo-eyes, limit switches, hinge bushings, and marine-grade hardware. If the specific part isn’t on hand, we can typically have it sourced and installed within one to two business days.
Common Electric Gate Repair Problems We See in Tequesta Homes
- Salt-corroded hinge posts and operator arms. Riverfront and Intracoastal lots see chloride pitting on steel and painted finishes in two to three seasons. We saw a steel hinge post off Tequesta Drive rust through at the footing after a decade of salt spray, forcing a full post replacement before the gate panel even needed work.
- Control boards water-damaged after thunderstorms. Wind-driven Florida rain finds its way past gaskets and into board enclosures. A board that runs fine on Monday can short out Tuesday morning after an overnight storm, especially on older ranch properties with drainage issues near the driveway.
- Mismatched replacement parts on older gates. A 1980s chain-link gate with a discontinued FAAC board and a newer gate on the same street with a Ghost Controls opener need two completely different parts pipelines. Generalists guess and order the wrong board. We pattern-match the board revision before we quote.
- Misaligned or blocked photo-eyes after wind events. Palm fronds, landscape debris, and shifting posts knock sensors out of alignment. The gate reverses for no obvious reason, and the owner assumes the motor is dying. Most of the time it’s a five-minute sensor fix.
Pricing for Electric Gate Repair in Tequesta, FL
Opening a Electric Gate Repair job in Tequesta starts with a $95 service call, which is waived when we proceed with the repair. From there, here’s what you’re looking at:
- Hinge re-alignment or replacement: $120 – $260 per hinge, including marine-grade hardware.
- Photo-eye sensor replacement or realignment: $85 – $180.
- Control board replacement: $175 – $385 depending on brand and programming time.
- Operator arm replacement: $180 – $340.
- Full operator replacement (motor and arm): $600 – $1,400 installed.
Every estimate is quoted in writing before work starts. You agree to the number, then we turn wrenches. Estimates are free when you call (855) 360-5306.
One thing that changes the price in Tequesta specifically: if the existing hardware is steel and we recommend stainless or galvanized replacement, that hardware costs 20 – 35% more than a standard inland fix. We’ll show you the difference and let you decide. Most coastal homeowners choose the marine-grade spec once they see what salt air did to the original.
See the difference
Before
After
Before
After
Before
AfterWe Also Serve Cities Near Tequesta
Our service trucks run the full Hobe Sound to Jupiter corridor. That includes Tequesta plus Limestone Creek, Juno Beach, and the unincorporated stretches between. If you’re in any of those areas and dealing with a dead gate operator, the same crew that handles Electric Gate Repair in Tequesta is the one you’ll see at your driveway. Call (855) 360-5306 and tell us what gate you’ve got.
Serving Tequesta, FL — Our Local Coverage Area
We’re based in the Tequesta area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Tequesta
Because Tequesta sits at the mouth of the Loxahatchee River, where salt-laden onshore breezes push chloride directly onto gate hardware year-round. Short driveways near River Drive, Tequesta Drive, and the Intracoastal mean operators are mounted close to the water, often less than 300 feet from the shoreline. Chloride accelerates pitting on steel arms, rust on hinge pins, and terminal corrosion inside control boards. Gates inland don’t face that constant salt load, which is why the same opener can last a decade inland and half that on the river. If your gate hardware is showing rust blooms or white corrosion, call (855) 360-5306 for an estimate before it fails permanently.
The control board shorts, followed by salt-caked hinge pins seizing. Our phone rings most the morning after a big storm with calls from riverfront streets where wind-driven rain pushed water into the operator enclosure. We usually find a corroded board or a burned relay, not a mechanical break. The tell is a gate that worked fine at dusk and is dead by dawn. We dry the board, replace what’s shorted, and reseal the enclosure gasket. Call us after the rain stops and we’ll have it back online the same day in most cases.
Yes. We work on 1980s chain-link and wrought-iron gates on the west side of Tequesta and custom aluminum, cedar, and Mediterranean-style gates on the waterfront. The parts are different, the failure modes are different, and the repair approach is different. Older steel gates rust at the hinge and pull at the post. Newer aluminum gates fail at the operator or the low-voltage connections. We stock parts for both and we don’t try to sell you a whole new gate when a hinge and a board will do it.
If the arm has visible pitting or rust streaks, the motor housing shows white corrosion, or the gate stalls under load and trips its breaker, the operator is likely past a board-level fix. Another sign: the gate opens slower every month even after hinge lubrication. We’ll test the amp draw on the motor, inspect the board for corrosion creep, and give you an honest read. If it’s repairable for $250, that’s what you’ll hear. If the arm is structurally compromised, we’ll show you the pitting and quote a marine-grade replacement. Replacement runs $600 – $1,400 including install in Tequesta.
Yes. Every automatic gate installation and repair in Tequesta must include functioning entrapment protection, which means either photo-eyes or contact edges that reverse the gate when something crosses the path. If your gate doesn’t have working sensors or they’ve been bypassed by a previous handyman, that’s a code violation and a real safety hazard. We won’t repair an automatic gate without confirming the entrapment circuit works. Sensor replacement or realignment runs $85 – $180, including testing under load. Call (855) 360-5306 and we’ll check yours as part of the estimate.
Tequesta’s Salt Air Is Hard on Gates. We’re Built for It.
Tequesta is a small, affluent waterfront village at the mouth of the Loxahatchee River, and its gates sit in one of the most corrosive residential environments in Palm Beach County. Driveways are short, lots are tight, and an automatic gate is often the first thing you see from the street. That means gate repair here isn’t just about getting a motor spinning again. It’s about matching the finish, sizing the hardware to the salt load, and understanding the difference between a galvanized post and a painted one before the first bolt comes off.
The housing stock runs from 1960s – 1980s ranches and CBS homes to newer coastal and Mediterranean builds with private docks. On the west side of Tequesta you’ll still find manual chain-link and older wrought-iron gates. Along the river and Intracoastal you’ll find automatic driveway gates, custom ornamental aluminum, and cedar gates with embedded openers. Some of these systems are decades old and still on original boards. Others are new installs that were never specified for marine exposure. Both need a tech who can diagnose the system in front of them, not order parts and hope.
What Actually Lasts on the Coast
Here’s what holds up in Tequesta’s conditions, and what doesn’t. Galvanized steel posts will outlast painted steel by a wide margin in salt air. Stainless steel hinge pins and bushings survive where standard zinc-plated hardware seizes in two years. Operator arms with marine-rated powder coat and sealed gasket housings resist the chloride pitting that rusts standard units from the inside out. Control boards need conformal coating or a sealed enclosure; if water finds the low-voltage terminals, the board fails whether the motor was healthy or not. These are specifications, not preferences. If you’re putting a new operator on a riverfront lot, marine-grade is the only spec that makes sense. If you’re repairing an existing system, we’ll replace failed parts with equivalents that are built for where Tequesta actually is.
When a Gate Failure Becomes a Security Problem
An electric gate that won’t close leaves your property open to the street overnight. In a village like Tequesta, where driveway gates are often the primary line between a riverfront home and the road, that’s not something you want to leave for a week. An HOA entrance gate that’s stuck open on PGA Boulevard or Riverside Drive becomes a public safety issue, not just a convenience problem. We treat these as priority calls, not because we upcharge, but because we understand what a gate actually does for the people behind it. If your gate is stuck open or won’t cycle, call (855) 360-5306 right away. We’ll get to Tequesta the same day in almost every case.
Call Archway Gate Repair for Electric Gate Repair in Tequesta
If your gate is down, call (855) 360-5306. Nelson Arrieta built Archway Gate Repair around the idea that a gate specialist should know the brand on your property before they finish the first sentence. We work on LiftMaster, FAAC, Mighty Mule, Elite, DoorKing, and the rest of the major residential and commercial brands, from the motor to the hinge. We service all of Tequesta, ZIP code 33469, including the riverfront streets, the golf communities, and the west-side ranch neighborhoods. Estimates are free, pricing is quoted before work starts, and we won’t sell you a replacement when a repair will do. Call now and get your electric gate back online.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Tequesta and the surrounding Palm Beach County waterfront communities.