Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Fort Lauderdale
When a driveway or estate gate stops working in Fort Lauderdale, the usual culprit is the coastal environment itself. Salt air eats hinges, pits circuit boards, and seizes operator motors years before the same parts would fail anywhere inland. At Archway Gate Repair, we’re a gate-only specialist, led by Nelson Arrieta, and we work on the brand already on your property, from LiftMaster swing operators on Las Olas Isles estates to Mighty Mule openers on Coral Ridge driveways. Call (855) 360-5306 and we’ll diagnose the failure over the phone, then schedule a Fort Lauderdale visit fast.
Why Archway Gate Repair Is Fort Lauderdale’s Preferred Gate Repair Company
Fort Lauderdale homeowners and property managers call us because we recognize their gate system before we arrive. We service nine major gate brands, including LiftMaster, FAAC, and Mighty Mule, so we’re not standing in your driveway flipping through a manual. That matters in Fort Lauderdale, where salt spray near the Intracoastal corrodes operator boards and keypads at different rates depending on the brand and housing. A general handyman sees a dead opener and quotes a replacement. We open the panel and find the corroded relay or the fried surge protector, then fix exactly that. Repair first, replace only when necessary.
We cover the full gate system: from the motor to the hinge. That means electric gate repair, automatic gate repair, hinge and post repair, gate realignment, lock repair, and weld and rust repair. If a full replacement makes more sense than a patch, we handle new gate installation too, so you never have to coordinate two companies. For Fort Lauderdale’s walled waterfront estates and older coral-rock walls, that full-system view saves real money.
Styles & brands we work with
Driveway Gate Repair in Fort Lauderdale
Driveway Gate Repair in Fort Lauderdale is rarely a simple hinge swap. Along the Intracoastal and canal-front streets from Las Olas to Coral Ridge, the salt-air side of a gate corrodes noticeably faster than the inland side. That means the hinge that looks fine from the house might be seized on the street side, and the post holding it might be weakening inside masonry that was never designed for salt exposure. In Fort Lauderdale, we see this pattern constantly: one side of the gate fails years before the other.
A typical driveway gate repair here runs $180 to $520 for hinge replacement, realignment, or post stabilization, depending on the gate’s weight and whether the post needs an independent footing. If the operator motor or control board has failed, the range shifts to $320 to $780 for a board replacement or motor swap on a common residential system. We quote the exact price before any work starts, and that number does not change unless we find structural damage we could not see during the initial estimate, which we discuss with you first.
Post and hinge work on older Fort Lauderdale walls
Many Fort Lauderdale homes built before the 1970s have gate posts mounted to coral-rock or block boundary walls. Those walls were not built for the wind loads we now code for, and after decades of salt exposure, the masonry crumbles around the anchor bolts. We often install an independent concrete footing for the hinge post rather than re-mounting to the old wall. This keeps the gate swinging true through hurricane season.
Electric opener repair on coastal properties
Electric gate repair is our core specialty, not an add-on. In Fort Lauderdale, we regularly replace corroded control boards and surge-damaged power supplies inside operators. If your opener works in the morning but trips a GFCI circuit after an afternoon storm, that’s a familiar Fort Lauderdale failure mode to us.
Gate Welding in Fort Lauderdale
Gate Welding in Fort Lauderdale has to account for what the finished weld will face: salt-laden onshore breezes, year-round humidity, and a June-to-November hurricane season. A welded repair that would hold for a decade inland can rust through in three years on a canal-front property if the wrong filler metal or paint is used. We have repaired rusted-through gate frames along the Intracoastal where the original weld was fine structurally but had never been treated for marine exposure.
Weld and rust repair on a Fort Lauderdale gate typically runs $150 to $410, depending on whether we’re patching a rusted section, re-welding a cracked hinge bracket, or rebuilding a corner joint. If the rust has compromised the gate frame’s structural integrity, we tell you straight: sometimes the honest fix is replacing the gate panel rather than chasing rust forever. We repair first, replace only when necessary, and we always quote before cutting any metal.
Rust repair on galvanized versus painted steel
Most Fort Lauderdale gates are either galvanized steel with a powder coat, or painted steel. Painted steel looks fine until the first scratch lets salt water reach bare metal, then the rust spreads under the paint film. Galvanized steel lasts longer, but even galvanization sacrifices itself over time near the Intracoastal. We always use stainless steel fasteners on coastal repairs, because a zinc-plated bolt will rust before the gate does.
Welding on old estate gates
Fort Lauderdale’s walled waterfront estates often have heavy custom gates that were welded to match the architecture. Those gates are worth repairing properly. We re-weld cracked joints, reinforce hinge points, and treat the repaired areas with marine-grade primer and paint.
Trusted Brands We Service in Fort Lauderdale
We are factory-familiar with nine of the most widely installed gate brands in Fort Lauderdale and Broward County: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means we know each system’s failure points before we open the panel. A LiftMaster swing operator on a Fort Lauderdale canal-front property tends to fail at the control board first, while an Elite slide gate more often needs limit switch adjustment. We keep common parts for these brands on hand for Fort Lauderdale jobs, which shortens repair time significantly. Diagnosed, not guessed.
Common Gate Repair Problems We See in Fort Lauderdale Homes
- Salt-air hinge seizure. On the Intracoastal side of a property, hinges pit and bind years before the inland side shows any wear. We replace them with stainless steel hardware rated for marine exposure.
- GFCI trips during summer squalls. Fort Lauderdale’s afternoon thunderstorms dump rain and lightning in 20 minutes flat. Gate operators that ran fine all dry season suddenly trip their GFCI circuit because moisture has found its way into a junction box or keypad housing.
- Surge-damaged control boards. Hurricane-season power surges and nearby lightning strikes fry circuit boards inside gate openers. The gate may work intermittently, beep without moving, or go completely dark.
- Sagging gates on old coral-rock walls. Many Fort Lauderdale homes from the 1950s and 60s have gate posts anchored into coral-rock or block walls that were never designed for modern cantilevered gate loads. The post leans, the gate sags, and the latch stops lining up.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Fort Lauderdale, FL
Fort Lauderdale gate repair pricing runs from $150 for a small weld or rust patch up to $780 for a board or motor replacement on a common residential operator. A full driveway gate realignment with hinge replacement lands between $180 and $520. A new operator installed on an existing gate, which we quote as a replacement only when a repair will not hold, typically runs $900 to $2,200 including labor. The biggest cost drivers in Fort Lauderdale are salt exposure, which determines whether we repair or replace hardware, and wind-load anchoring, which determines whether a leaning post needs an independent footing. We quote the exact price before any work begins. Call (855) 360-5306 for a free estimate.
We Also Serve Cities Near Fort Lauderdale
Our Gate Repair team covers Fort Lauderdale and the surrounding Broward communities, including Plantation, Broadview Park, Broward Estates, and Lauderhill. If your gate is in any of these areas, call us for the same specialist attention we give every Fort Lauderdale job. For details on the areas we cover, see Gate Repair in Fort Lauderdale and nearby service pages.
Serving Fort Lauderdale, FL — Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Fort Lauderdale
The salt-air side of your property, typically the side facing the Intracoastal or the ocean breeze, exposes your operator to a constant fine salt spray that settles on circuit boards, terminals, and wiring harnesses. Salt draws moisture and accelerates corrosion, so a control board that would last 10 years inland may fail in four or five on a canal-front Fort Lauderdale lot. We waterproof the board housing, seal connectors, and use stainless fasteners when we repair or replace these units. Call (855) 360-5306 if your operator is acting up.
The first thing to check is the hinge post, not the hinges themselves. In Fort Lauderdale, sagging usually means the post has leaned or the masonry around its anchor bolts has cracked. That’s especially true on older coral-rock or block walls built before modern anchoring standards. We inspect the post with a level, check the footing, and only then adjust or replace hinges. Free estimates: (855) 360-5306.
Yes. Automatic gates in Fort Lauderdale and across Broward County must have entrapment protection, meaning safety sensors, edge sensors, or both, and they must be properly wired to reverse or stop the gate if an obstruction is detected. This is a safety requirement, not an optional add-on. If your gate is missing or has failed sensors, we install and test the correct protection for your gate type. Call (855) 360-5306 for a safety check.
It trips because moisture is entering a junction box, keypad, or the operator housing, creating a ground fault. Fort Lauderdale’s summer storms combine heavy rain, wind-driven water, and high humidity, and the first place water finds is often a seal that has aged out. We locate the water entry point, dry the circuit, and replace the gaskets or housing seals so the GFCI stops tripping. Call (855) 360-5306 and we’ll sort it out.
Yes, but the repair often involves more than the operator. Old coral-rock walls crumble around anchor bolts, and mounting a working operator to unstable masonry just means the next failure is already scheduled. We install an independent concrete footing or steel post for the operator mount, then wire the repaired or replaced unit to it. This is common on Fort Lauderdale homes built in the 1950s and 60s. Call (855) 360-5306 for a site visit and a quote.
Call Archway Gate Repair for Fort Lauderdale Gate Repair
If your gate is sticking, sagging, tripping its breaker, or dead after a storm, call us. Nelson Arrieta and our team know Fort Lauderdale’s specific failure modes, from salt-corrosion on Las Olas Isles operators to wind-load anchoring in Coral Ridge. We quote the price before any work starts, and we repair first. Call (855) 360-5306 for a free estimate on gate repair in Fort Lauderdale, FL.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Fort Lauderdale and all of Broward County.