Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Palm Beach
Gate repair in Palm Beach usually runs $240 – $680 for hinge, sag, and realignment work, while electric gate motor and control board repairs typically land between $450 and $1,400 depending on the operator and access. Most Palm Beach calls are answered same day or next morning. If your gate is sagging, grinding, or stuck, call Archway Gate Repair at (855) 360-5306. We work on the brand already on your property, and the price is quoted and agreed before any work starts.
Palm Beach is unlike most repair territories we cover. The gates along Ocean Boulevard, Via Mizner, and the estate streets around 33480 aren’t off-the-shelf aluminum panels. They’re original ornamental iron, coral-stone, and period wood fabrications, many of them dating to the 1910s and 1920s. A seized hinge on a Mizner-era gate isn’t a hardware-swap job. It’s a preservation decision. We approach it that way from the first inspection.
Why Archway Gate Repair Is Palm Beach’s Preferred Gate Repair Company
Palm Beach property owners, HOA managers, and estate staff tend to spot a generalist within the first two minutes of a service call. We know because we’ve followed plenty of them. Our team is factory-familiar with LiftMaster, FAAC, Elite, and Mighty Mule systems, and we carry the diagnostic habits that come from working on those brands constantly. That means when we roll up to a La Puerta del Sol property or an estate off South County Road, we recognize the operator and its typical failure points before we unload the truck.
We also understand what this specific town demands. Gate Repair in Palm Beach means working on gates that are original architectural features, many of them protected by the town’s landmark review process. A repair that alters visible hardware or changes the footprint of a gate pier can trigger Architectural Commission approval. We’ve worked through that process with property owners and know when a repair qualifies as in-kind maintenance versus when it needs an application. That local knowledge saves weeks of delay.
Our response time to Palm Beach is same day for emergencies and next morning for scheduled repair work throughout 33480. Every quote is written, itemized, and agreed before work begins. Nelson Arrieta founded Archway Gate Repair on a repair-first philosophy: diagnose the actual failure, fix what’s broken, and replace only what can’t be restored.
Styles & brands we work with
Wood Gate Repair in Palm Beach
Wood Gate Repair in Palm Beach often means saving something that predates the current owner’s grandparents. The town’s Mediterranean Revival and Spanish Colonial estates are full of solid mahogany, cypress, and teak gates, many built as original architectural features on Mizner-designed properties. Salt-laden ocean air works on the hardware while humidity works on the wood itself, loosening mortise joints and warping stiles. Most wood gate repairs in Palm Beach run $320 – $750 for sag correction, hinge replacement, and localized rot repair, with full stile or panel refabrication running higher when period lumber must be matched.
Matching Original Period Fabrication
You can’t buy a replacement stile for a 1920s cypress gate at a lumberyard. The grain, the joinery, the finish, they have to match what’s already there. We source period-appropriate wood and replicate the original joinery so the repair disappears into the gate.
Sag Correction on Heavy Estate Gates
A solid wood gate on a historic property can weigh hundreds of pounds. When hinges pull or posts settle, the latch stops meeting the receiver. We drop the gate, repair the hinge mortises, reinforce the post, and rehang it square. That’s the full repair, not a shim job that lasts a season.
Driveway Gate Repair in Palm Beach
Driveway Gate Repair in Palm Beach usually involves an automated system that has stopped cooperating: a swing gate that’s lost its arc, a slide gate grinding on a bent track, or a cantilever gate refusing to move at all. The typical driveway gate repair call in 33480 runs $380 – $950 for mechanical and alignment work, while operator replacement on a large estate gate lands between $1,100 and $2,800 depending on the system. We quote the full number before touching the gate.
Operators and Track Systems
On Billionaires’ Row, we repaired a 1920s wrought-iron swing gate whose LiftMaster operator had seized from salt corrosion. The hinge post footing had also shifted, causing the gate to sag and bind. We corrected the sag, rebuilt the post footing to its original depth, and installed a sealed operator rated for coastal exposure. The gate ran silent within a day.
Cantilever and Slide Gate Failures
Palm Beach’s 150+ mph design wind requirements mean slide and cantilever systems carry heavier bracing and tighter tolerances than inland installs. When a track bends or an anchor pulls loose, the gate doesn’t just slow down, it binds mid-travel. We reset anchors, straighten or replace track sections, and re-level the entire run.
Trusted Brands We Service in Palm Beach
We repair the system already on your property, and in Palm Beach that usually means a LiftMaster, FAAC, Elite, or Mighty Mule operator driving a custom gate. Our techs know the wiring, control board, and sensor layouts on these systems without a learning curve. We stock common boards, motors, safety loops, and remotes in our service vehicles, so most Palm Beach repairs don’t wait on parts. Nelson Arrieta built the company around brand-specific diagnosis: we know what a FAAC board failure looks like versus a Mighty Mule limit switch problem, and we don’t guess.
Common Gate Repair Problems We See in Palm Beach Homes
- Seized hinges from salt air: Ocean air on South Ocean Boulevard and the lakefront streets accelerates corrosion fast. Hinges that would last decades inland seize solid in a few years here, which is why we use sealed marine-grade bearings on coastal repairs.
- Crumbling coral-stone piers: Anchoring a new operator into a century-old coral-stone pier often cracks the masonry. We see this constantly on Mizner-era properties. The fix requires masonry stabilization before the operator goes in, which is a restoration project, not a quick mount.
- Bent slide-gate tracks from storm winds: Hurricane-season wind loads bend track sections and pull anchors loose on slide gates. The gate then binds mid-travel or refuses to close fully. We re-level the run and replace damaged track rather than forcing the rollers.
- Operator failures from humidity and power surges: Year-round humidity and storm-season power fluctuations shorten control board life. We see blown relays and corroded terminals far more often than dead motors, so we trace the board and wiring before quoting any part.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Palm Beach, FL
Here’s what Palm Beach homeowners can expect for common repair work:
- Hinge and post repair: $240 – $620
- Gate realignment and sag correction: $280 – $680
- Lock and latch replacement: $180 – $420
- Weld and rust repair on ornamental iron: $350 – $1,100 per section
- Wood gate repair, stile or panel: $320 – $750
- Electric operator or control board replacement: $450 – $1,400
- Full operator replacement on a large estate gate: $1,100 – $2,800
Prices stay within these ranges for most Palm Beach jobs. Coral-stone pier stabilization where masonry has crumbled adds restoration scope and is quoted separately after inspection. Every estimate is free, written, and agreed before any work starts. Call (855) 360-5306 for a precise quote on your gate.
We Also Serve Cities Near Palm Beach
Our team covers Palm Beach and the surrounding coastal communities. We handle Gate Repair in Mangonia Park, West Gate, West Palm Beach, and Palm Beach Shores. If you’re in any of these nearby towns and your gate is down, call us, response time across the area is typically same day or next morning.
Serving Palm Beach, FL — Our Local Coverage Area
We’re based in the Palm Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Palm Beach
In-kind repairs that preserve the original design, materials, and operator location generally don’t require Palm Beach Architectural Commission review. What triggers a review is any change to visible hardware, gate footprint, pier location, or material that alters the gate’s appearance from the street. If your repair falls into that second category, we’ll tell you before any work starts and help you through the application. Call (855) 360-5306 and we’ll assess which path applies to your gate.
Coral stone is soft and porous, and century-old piers have often degraded internally even when the face looks intact. Drilling anchor holes for a new operator introduces vibration and point-load stress that the stone can’t absorb, so the face spalls or the anchor pulls free. We stabilize the pier first with masonry consolidation, then mount the operator to a reinforced base plate so the load spreads across the pier instead of concentrated on four anchor points.
We use marine-grade sealed bearings, corrosion-resistant fasteners, and coastal-rated operators on any Palm Beach repair. For ornamental iron, we remove active rust, treat the steel, and apply a zinc-rich primer and marine finish system designed for salt exposure. Ongoing maintenance, usually an annual hinge and bearing service, is worth its cost within half a mile of the ocean. Call (855) 360-5306 to schedule an assessment.
Swing gate failures here are usually hinge, post, or operator-arm issues caused by salt corrosion and heavy ornamental gates. Slide and cantilever gate failures are more often track, anchor, or roller problems tied to wind loading and uneven settling. We diagnose both from experience with the specific operator brand and the gate’s fabrication, then quote the repair the system actually needs rather than the one that’s easiest to sell.
Yes. We integrate new intercom, keypad, and camera entry equipment into existing operator housings and keep wiring concealed within the gate or pier, which matters on landmark-district properties where visible hardware changes trigger review. We typically work with your existing access control brand and wire new equipment to match the original layout. Call (855) 360-5306 and we’ll walk your gate and give you a written scope.
Contact Archway Gate Repair in Palm Beach
If your gate is sagging, stuck, or refusing to open, we’ll diagnose it and give you a free written estimate before any work starts. Our team knows Palm Beach’s gates, from the landmark iron on Via Mizner to the modern operators on newer infill off Royal Palm Way. We repair first, replace only when the gate can’t be saved, and we quote the full price up front. Call Nelson Arrieta and the team at Archway Gate Repair at (855) 360-5306 to schedule a service call.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Palm Beach and the surrounding coastal communities.