Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Sunset, FL
Gate installation in Sunset means working with Miami-Dade’s High Velocity Hurricane Zone rules, 1970s – 1990s subdivision lots, and sliding aluminum or wrought-iron driveway gates that have to hold up to wind loads and salt air. That is not a standard suburban gate job. Archway Gate Repair installs, repairs, and services gate systems throughout Sunset, FL, and we know the specific product approvals, anchoring requirements, and operator specs this area demands. If you need a new gate or a replacement for one that has failed, call us at (855) 360-5306 for a free estimate.
Why Sunset Homes Are Different
Sunset sits in southwest Miami-Dade, and most of the housing stock in the 33173 ZIP was built between the 1970s and 1990s. These are planned subdivisions with wide driveways and CBS construction, and a lot of backyards open onto lakes or canals. That layout shapes the gate work here. Long sliding gates are the standard front driveway setup, and rear property-line gates often double as pool-safety barriers under Florida building code. A gate on a canal-front lot is not just a gate: it is a wind-load assembly that has to meet NOA product-approval standards. We regularly see first-generation openers with corroded control boards and tracks that have drifted out of alignment after years of heat and humidity. Salt-laden air from coastal exposure speeds up hinge and fastener corrosion even on newer installations. Archway Gate Repair has served Sunset since 2011, and the calls we take here are usually not simple: the gate failed, the opener stopped responding, or a hurricane inspection flagged the anchoring.
Styles & brands we work with
Our Main Sunset Services
The two calls we answer most in Sunset are for mechanical gate failures and for electric systems that stopped responding. Here is what each one involves around here.
Gate Repair in Sunset
Sliding gate tracks, rollers, and hinges on Sunset driveways take a beating from humidity and storm-driven debris. We repair manual and automated gates, from a sagging wrought-iron panel to a track that binds halfway open. On canal-adjacent lots we check anchoring and post condition as part of the repair, because a loose post in a wind event is a failure waiting to happen. For a closer look at what mechanical gate repair costs and how we diagnose it, see our dedicated Gate Repair in Sunset page.
Electric Gate Repair in Sunset
Electric gate repair is the heavier share of our Sunset calls. Control boards corrode, safety sensors misalign, and motors that have run for fifteen years simply stop. We work on LiftMaster, FAAC, Mighty Mule, and Elite systems that are common in 33173, and we diagnose from the power supply through the limit switches rather than swapping parts on a guess. Read the full breakdown on our Electric Gate Repair in Sunset page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Sunset
New gate installation in Sunset is usually driven by one of two situations: an original 1980s gate has reached the end of its service life, or a property owner wants to convert a manual sliding gate to an automated system that meets current wind-load standards. In 33173, any new install has to work with Miami-Dade product-approval requirements, and on canal or lakefront lots the rear gate has to satisfy pool-barrier code at the same time. Archway Gate Repair handles the full installation, including the operator, track, anchors, and safety edges. Our Gate Installation service covers new builds and full replacements.
Sliding Gate Installation
Signs you need it
Your existing sliding gate binds, jumps the track, or has panel damage beyond a re-weld, and the track and rollers are original to the home.
What it costs in Sunset
Sliding gate installation in Sunset typically runs $2,800 – $6,200 depending on length, material, and whether the existing track can be reused or needs replacement.
How we do it
We remove the old panel, set new or reset existing track and rollers to spec, hang the new gate, and adjust travel and guide wheels so it rolls without binding.
Automatic Gate Installation
Signs you need it
You are still opening a heavy sliding gate by hand, or your old opener failed and the panel itself is still sound but the operator needs a full replacement.
What it costs in Sunset
Automatic gate installation in Sunset, including the operator, safety edges, and control wiring, generally falls between $3,400 and $7,800 with the operator brand and gate weight driving the spread.
How we do it
We mount the operator on a proper concrete pad, run power and low-voltage wiring, install safety edges and photo eyes, and program travel limits and force settings for the specific gate.
What Gate Installation Costs in Sunset
| Item | Typical range in Sunset |
|---|---|
| Sliding gate installation | $2,800 – $6,200 |
| Automatic gate installation (operator, edges, wiring) | $3,400 – $7,800 |
| Wrought-iron driveway gate installation | $3,200 – $6,700 |
Two factors push the top end of these ranges in Sunset: canal and lakefront lots often require deeper, code-reviewed anchoring, and gates that must pass a post-storm inspection get specified with heavier hardware and wind-rated assemblies. Every quote we give is the price you pay, agreed in writing before any work starts.
Can you install a gate that meets Miami-Dade hurricane code?
Yes. We install gate assemblies specified to Miami-Dade High Velocity Hurricane Zone requirements, including NOA-approved operators, wind-rated panels, and anchoring reviewed for post-storm inspection. We do not install anything that would fail a re-inspection.
How long does a new gate installation take in Sunset?
Most sliding gate installations finish in one to two days once materials arrive. Automatic systems can add a day for wiring, programming, and safety sensor setup. We schedule installs around HOA or property-management requirements and confirm the timeline before ordering parts.
Brands We Service in Sunset
We work on the brand already on your Sunset property. Our technicians are factory-familiar with LiftMaster, FAAC, Elite, and Mighty Mule systems, among others, and we stock common boards, remotes, and safety edges locally so we do not wait a week on parts. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Sunset, FL
| Service | Typical range in Sunset |
|---|---|
| Gate repair diagnostic | $85 – $135 |
| Gate hinge replacement | $175 – $365 |
| Gate track and roller replacement | $360 – $725 |
| Wrought-iron gate repair | $260 – $610 |
| Electric gate actuator repair | $340 – $760 |
| Control board replacement | $425 – $940 |
| Safety sensor replacement | $175 – $360 |
| Sliding gate installation | $2,800 – $6,200 |
| Automatic gate installation | $3,400 – $7,800 |
| Wrought-iron driveway gate installation | $3,200 – $6,700 |
In Sunset, prices push upward when a gate is on a canal lot and needs deeper anchoring or when the repair has to happen on a system that has already been patched several times and the corrosion is structural rather than cosmetic. Whatever the job, the number we quote is the number you approve before we start.
Neighborhoods We Serve in Sunset
We cover the full 33173 ZIP and the subdivisions that make up Sunset, from the wide-driveway ranch homes in the older sections to the lakefront and canal-front properties where rear barrier gates are common. In most of Sunset we can have a technician out the same day for a repair call.
- Sunset Lakes
- Hammocks area
- West Kendall corridor
- Canal-front subdivisions along SW 72nd Street
- Lakefront homes near Miller Drive
Service Area – Cities Near Sunset
From Sunset we work into the surrounding southwest Miami-Dade communities. We serve gate repair and installation customers in Olympia Heights, FL, Westwood Lake, FL, Richmond Heights, FL, and Kendale Lakes, FL. Each area has its own housing era and gate mix, but the wind-load and humidity issues stay consistent.
Serving Sunset, FL — Our Local Coverage Area
We’re based in the Sunset area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Sunset
For most repair calls in the 33173 ZIP we can be on site the same day, and we carry common LiftMaster, FAAC, and Mighty Mule parts in the truck so a diagnosis does not automatically mean a second visit. Call us early in the day and we will give you a straight arrival window.
Many Sunset subdivisions have architectural review requirements for any visible gate change, especially a full replacement or an operator addition. We provide the specs, drawings, and product-approval references the HOA or property management office asks for, and we schedule around their review timeline so the work does not get flagged later.
Yes. Along with residential sliding and swing gates, we work on commercial access systems throughout Sunset, including operator replacement, safety loop installation, and control board diagnostics for properties that need vehicle access management without a full gate tear-out.
If your gate is down or you are planning a replacement in Sunset, call Archway Gate Repair at (855) 360-5306. We will give you a free estimate, an honest diagnosis, and a price you approve before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Sunset Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Danika Ellison"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Chris Padgett"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Michelle Ackerman