Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Sunrise
Gate repair in Sunrise usually means one of two things: a swing gate that’s sagging or a slide gate that won’t move. We fix both. Archway Gate Repair is a gate-only specialist, which means every technician who arrives at your Sunrise property already knows the failure points on LiftMaster, FAAC, BFT, and Linear systems before they open the service panel. If your gate is stuck open, stuck closed, grinding, or dead at the keypad, call (855) 360-5306 and we’ll get it diagnosed.
Why Archway Gate Repair Is Sunrise’s Preferred Gate Repair Company
Sunrise keeps us busy with a specific kind of call. This city is full of 1970s through 1990s homes in master-planned and 55+ communities, and the original gate operators from that era are reaching the end of their service life all at once. We see the same failing control boards, the same corroded hinge posts, the same sagging gate leaves across Sunrise Lakes, Sunrise on the Green, and the neighborhoods east of Sawgrass. That repetition is an advantage. We know what the problem is before we pull into the driveway.
Nelson Arrieta built Archway around a simple idea: a gate company should work on gates, not fences or garage doors as a side hustle. That focus shows in how we diagnose. A generalist replaces parts until something works. We identify the failed component, explain it in plain language, and fix it correctly the first time. Sunrise property managers and HOA board members call us because we show up knowing the equipment and the approval process.
Styles & brands we work with
Iron Gate Repair in Sunrise
Iron gate repair in Sunrise starts with the hinge post, not the panel. Most ornamental iron gates in this city were installed decades ago on steel posts set in concrete, and after thirty years of South Florida humidity, those posts corrode at the base and the gate begins to sag. A typical iron gate hinge and post repair in Sunrise runs $250 – $650 depending on whether we’re shimming and re-welding the existing post or cutting it out and setting a new one. Realignment of a sagging double leaf adds another $150 – $350.
Hinge and Post Work
Worn barrel hinges on an iron gate don’t just squeak. They drop the leaf, which drags the latch out of alignment and stresses the operator. We weld, replace, or rebuild hinges and reinforce the post footing so the gate swings true. The goal is a gate that feels weightless when you push it, because the hinges are actually carrying the load.
Weld and Rust Repair
Salt-laden air in Sunrise eats iron fast. We see rust blooms around weld seams and at the bottom rail where sprinkler water hits the metal. We grind out the rot, weld in new steel, prime, and match the finish so the repair doesn’t look like a patch job. Powder-coated panels get matched to the original color, which matters when your HOA’s architectural review committee is watching.
Sliding Gate Repair in Sunrise
Sliding gate repair in Sunrise is most often a track and roller problem disguised as a motor problem. A cantilever or V-track slide gate that shudders, binds, or stops halfway is usually fighting a bent track or seized rollers, and the operator burns out trying to overcome it. A typical sliding gate roller and track repair in Sunrise runs $200 – $500. If the operator itself has failed, retrofitting a new LiftMaster or BFT slide operator typically runs $900 – $1,800 installed.
Track, Roller, and Rack Alignment
After hurricane season, we get a wave of Sunrise slide gates with bent mid-rail tracks and pinion gears that have jumped teeth. The fix is rarely just tightening bolts. We straighten or replace the track section, set the rollers to the correct height, and realign the rack so the drive gear meshes cleanly. Skipping that alignment work is how a new motor dies in eighteen months.
Operator and Control Board Retrofit
The 1990s slide gate operators still running in Sunrise’s older communities are on borrowed time. Control boards fail, replacement parts are discontinued, and retrofitting a current operator is usually cheaper than patching a 30-year-old motor. We handle the full retrofit: new operator, new safety photocells, compatible keypad or loop detector, and a clean handoff to your property manager.
Trusted Brands We Service in Sunrise
We work on the brand already on your property. Most Sunrise gates run on LiftMaster, FAAC, BFT, or Linear, and our technicians are factory-familiar with the failure points on each. That means a FAAC hydraulic operator gets diagnosed differently than a BFT electromechanical slide operator, and we stock the common boards, remote receivers, and safety sensors for these brands so a Sunrise repair doesn’t stall on a parts order. When parts do need to ship, we know exactly which distributor in Broward has them.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Sunrise Homes
- Obsolete 1980s and 90s control boards. Original operators installed when Sunrise Lakes and the eastern 33304 neighborhoods were built are failing now, and most manufacturers no longer make the replacement boards. Retrofitting a current operator is usually the honest answer.
- Sagging gates misdiagnosed as panel problems. A gate leaf dropping at the latch side is almost always a worn hinge or a rusted post, not a bent panel. We fix the post and hinges, then realign the leaf.
- Post-hurricane track and latch damage. Every August through October we get Sunrise calls for slide gates that jumped the track and swing gates that no longer latch. Wind loads and flying debris bend hardware and shear weak welds.
- HOA and ARC approval stalls. In deed-restricted communities, a repair can’t start until the board or architectural review committee signs off. We know what spec documentation they need, which keeps the job moving.
Pricing for Gate Repair in Sunrise, FL
Gate repair in Sunrise runs a fairly predictable range once we know what’s failed. Hinge and post repairs: $250 – $650. Iron gate welding and rust repair: $180 – $450. Sliding gate roller and track work: $200 – $500. Operator retrofit with new LiftMaster or BFT unit: $900 – $1,800. A full new slide gate with operator and safety edges typically runs $2,800 – $6,500 depending on length and finish. Every job gets an upfront written quote at no cost, and we agree on the number before any work begins. Call (855) 360-5306 for a free estimate at your Sunrise property.
We Also Serve Cities Near Sunrise
Our Gate Repair team covers Sunrise and the surrounding Broward communities. We regularly send technicians to Wilton Manors, Boulevard Gardens, Rock Island, and Roosevelt Gardens for the same gate repair, electric gate repair, and gate installation work we do across Sunrise. If your property is nearby and the gate is down, call us.
Serving Sunrise, FL — Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Sunrise
Yes, in most cases we can repair the existing gate without triggering a new architectural review, because we’re restoring the original equipment and finish rather than changing the gate’s appearance. The key is matching paint, powder coat, and hardware exactly to what was originally approved, and we document that in our work summary for your board. If the gate itself needs replacing, that’s when ARC approval typically kicks in, and we can provide the spec sheets and samples your committee will want. Call (855) 360-5306 and we’ll tell you honestly which path your repair falls under.
Retrofitting is usually cheaper when the gate, posts, and track are still in good shape. A full operator retrofit runs $900 – $1,800, while replacing the entire gate and operator typically starts at $2,800 and climbs with size and finish. We recommend retrofit when the structure is sound, and replacement only when rust or wind damage has compromised the gate itself.
Tightening hinge bolts never fixes a sag, because the problem is almost always a worn hinge barrel or a rusted post that has lost its footing in the concrete. Once the post moves, no amount of bolt torque pulls the gate back up. We weld or replace the hinge and reinforce the post, then realign the leaf so the latch and the operator work again.
Yes. Any automatic gate operator in Sunrise must have functioning UL 325 entrapment protection, which means safety photocells, contact edges, or both, depending on the gate type and when it was installed. Older operators were frequently installed without these. When we retrofit a Sunrise gate, we bring the safety system up to current code as part of the job.
Hurricane season is the single biggest cause of sudden gate damage in Sunrise, mostly from wind gusts twisting panels and debris striking tracks. After a storm, check for a bent slide track, a latch that no longer aligns, a post that’s leaning, and any grinding sound from the operator. If you see any of those, call us before the operator burns itself out fighting the damage.
Need a gate fixed in Sunrise? Call Archway Gate Repair at (855) 360-5306 for a free estimate. We’ll diagnose the problem, give you an upfront price, and fix it right the first time.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Sunrise since our founding in Miami Gardens.