Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Tamarac, FL
Gate installation in Tamarac, FL typically runs $1,500 to $8,400 depending on whether you need a simple swing gate on a ranch home or a full automated sliding entry for an HOA community. We’re Archway Gate Repair, and we’ve served Tamarac since 2011, focusing on gates alone: manual gates, electric gates, and new installations. Most Tamarac homes were built between the 1960s and 1990s inside planned communities, so the gates we install must handle South Florida humidity, hurricane wind load, and daily use by residents who expect the system to work without fuss. Call (855) 360-5306 for a free estimate on any gate project in Tamarac.
Why Tamarac Homes Are Different
Tamarac is a buildout-era Broward city of mostly 55+ and family HOA communities. Virtually every single-family home sits behind a private driveway gate or within a gated subdivision entrance. That means gate work here is as much about keeping HOA and community-association access control running and compliant as it is about fixing the gate itself. We regularly coordinate with HOA boards in Kings Point and other 55+ communities, where gate operators and keypads are often original to the 1980s or 1990s build and bake in the Florida sun all day.
The housing stock matters too. Tamarac’s homes are overwhelmingly ranch-style and villa properties from the 1960s through 1990s, many with decorative metal driveway gates, aluminum entry gates, and shared community entrance gates mounted on masonry or stucco walls. These older posts have settled over decades, which changes how a new gate must be hung and squared. Add South Florida’s year-round humidity, salt-laden air from the nearby coast, and heavy summer thunderstorms, and you get accelerated corrosion on steel and hinges plus regular water intrusion into gate operators. Installation here is never a bolt-and-go job.
Styles & brands we work with
Our Main Tamarac Services
Two gate services dominate calls from Tamarac homeowners and HOA managers: repair of existing gates and repair of electric gate systems that have stopped opening reliably. Each has its own dedicated Tamarac page below.
Gate Repair in Tamarac
Most Tamarac repair calls come from aging gate hardware: hinges that have rusted through from humidity, sagging gates pulling against old posts, and latch systems that no longer align. We work on the brand already on your property, whether that’s a decorative steel driveway gate from the 1980s or a newer aluminum entry gate. In Tamarac’s gated communities, we also handle shared entrance gates where a single failure affects dozens of homes. Repair first, replace only when necessary. For full details on repair work in Tamarac, see our Gate Repair in Tamarac page.
Electric Gate Repair in Tamarac
Electric gate repair in Tamarac is a year-round need because storm outages kill backup batteries and control boards on systems that are decades old. We handle motors, openers, control boards, safety loops, and wiring on brands including LiftMaster, FAAC, BFT, and Linear. When a Tamarac HOA entrance gate stops responding to a keypad during snowbird season, the board doesn’t have time for trial-and-error troubleshooting; they need a tech who arrives already knowing the system’s failure points. Diagnosed, not guessed. Read more on our Electric Gate Repair in Tamarac page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Tamarac
Gate installation in Tamarac means building for a climate that punishes hardware. The 1960s-to-1990s housing stock has settled posts, masonry walls, and HOA design standards that a new gate must match, and South Florida’s humidity and hurricane-season wind loads mean we spec materials and anchors differently here than we would inland. Whether you’re replacing a rusted driveway gate or adding an automated entry for a Tamarac community, the job starts with a site visit and an honest assessment of what the existing structure can carry. For the full scope of our installation work, see our Gate Installation hub.
Automatic Gate Installation
Signs you need it
You’re getting out of the car to swing the gate open in the rain, or your existing opener is original to the home and no longer holds up to daily cycles, or the gate just stopped responding to remotes and keypads.
What it costs in Tamarac
Automatic gate installation in Tamarac typically runs $2,250 to $8,400 depending on gate length, operator type, and whether we’re retrofitting an existing gate or hanging a new one.
How we do it
We survey the gate and posts, specify an operator matched to the gate’s weight and cycle count, then install the motor, arms, safety sensors, and control wiring before testing the full open-close cycle repeatedly.
Sliding Gate Installation
Signs you need it
Your driveway is too short for a swing gate, or the existing swing gate has been hit by cars or storm wind enough times that a sliding configuration would be more reliable.
What it costs in Tamarac
Sliding gate installation in Tamarac generally runs $2,250 to $8,400, with final cost driven by track length, gate weight, and whether we need to pour a new concrete track bed in the drive.
How we do it
We set the track and posts level on the existing concrete, hang and square the gate, then install the operator, rack or chain drive, and safety edges before load-testing the system.
Driveway Gate Installation
Signs you need it
The old driveway gate has rusted through at the hinges, sags badly enough to drag, or no longer matches the look your HOA or you expect.
What it costs in Tamarac
Driveway gate installation in Tamarac typically runs $700 to $2,250 for a manual decorative gate, and higher when an operator and access controls are included.
How we do it
We measure the drive opening, choose or build a gate sized to it, set posts and hinges square on the existing masonry, and hang the gate so it clears and latches cleanly.
Electric Gate Installation
Signs you need it
You want keypad or remote access for a driveway or community entrance, or the existing electric operator is beyond repair and needs a full replacement including wiring and safety devices.
What it costs in Tamarac
Electric gate installation in Tamarac typically runs $1,500 to $8,400, with operators, control boards, safety loops, and access keypads all factored into the written quote.
How we do it
We mount the operator to a stable post or pad, run the power and control wiring properly, wire the keypad or intercom, install photoelectric sensors and safety loops, then cycle-test everything.
What Gate Installation Costs in Tamarac
| Item | Typical range in Tamarac |
|---|---|
| Manual driveway gate (installed) | $700 – $2,250 |
| Automatic swing gate (operator + gate) | $2,250 – $8,400 |
| Sliding gate (operator + track + gate) | $2,250 – $8,400 |
Does a new gate in Tamarac need HOA approval?
In most Tamarac HOA and 55+ communities, yes. Your community’s design standards often control gate height, material, and color before installation. We can build to the spec your board provides and coordinate access with the management company so the install day goes smoothly.
How long does gate installation take in Tamarac?
Most single-family driveway gate installations take one day on site. Custom or automated sliding gates in Tamarac can run two to three days when concrete or electrical work is involved. We always confirm the schedule and price before any work starts.
Brands We Service in Tamarac
We service LiftMaster, FAAC, BFT, and Linear equipment across Tamarac, and we carry common boards, remotes, and safety edges for these brands in our local stock. That means less waiting on parts and a faster turnaround when a gate is down. See our brands for the full list we work on.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Tamarac, FL
| Service | Typical range in Tamarac |
|---|---|
| Automatic gate installation | $2,250 – $8,400 |
| Sliding gate installation | $2,250 – $8,400 |
| Driveway gate installation (manual) | $700 – $2,250 |
| Electric gate installation | $1,500 – $8,400 |
| Gate opener motor replacement | $550 – $1,900 |
| Control board replacement | $350 – $900 |
| Hinge and weld repair | $275 – $600 |
| Gate safety device installation (sensors, loops) | $450 – $1,800 |
| Gate post reset and concrete | $450 – $1,200 |
In Tamarac, prices climb when a gate sits on a sagging old post or a masonry wall that needs work before anything new can hang, and when hurricane-season damage has compromised the anchors. Every Tamarac job gets a written price agreed before any work starts, so there’s no surprise on the invoice.
Neighborhoods We Serve in Tamarac
We cover all of Tamarac’s ZIP 33321, including community-led neighborhoods where gate access is managed by an HOA board rather than a single homeowner. We usually reach Tamarac addresses same-week for scheduled work, with same-day response for emergency gate failures.
- Kings Point
- Woodlands Country Club
- Mainlands of Tamarac
- Westwood Community
- Spring Lake
Service Area – Cities Near Tamarac
Archway Gate Repair also works in the cities around Tamarac, including North Lauderdale, FL, Palm Aire, FL, Coral Springs, FL, and Margate, FL. If your gate sits in a neighboring city, call (855) 360-5306 and we’ll confirm coverage and schedule a visit.
Serving Tamarac, FL — Our Local Coverage Area
We’re based in the Tamarac area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Tamarac
Yes. We coordinate directly with HOA boards and property managers in Tamarac’s gated and 55+ communities. We understand board approval processes, access scheduling, and the need for prompt status updates so an entrance gate gets back online without friction.
Yes. Most Tamarac calls are residential driveway gates and HOA community entrances, and we work on both. The equipment is often the same, and our approach is the same: diagnose the specific failure, fix it, and don’t replace a gate or operator unless it’s genuinely needed.
For a dead community entrance gate or a driveway gate stuck open, we respond same-day across Tamarac. For non-emergency replacement and installation work, we schedule within the week. Call (855) 360-5306 and we’ll give you an honest arrival window.
Call Archway Gate Repair at (855) 360-5306 for a free estimate on gate installation, repair, or service in Tamarac. We’ll diagnose the problem, quote the price, and fix it right the first time.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tamarac Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Chris Padgett"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Michelle Ackerman"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Veronica Mendoza