Gate Repair in Tequesta — Fixed Today, No Surprise Invoice

Fast, Reliable Gate Repair Across Tequesta

Gate repair in Tequesta usually costs between $185 and $620 depending on whether we’re replacing a rusted hinge, swapping a control board, or re-hanging a sagging panel. Most repairs on this side of the Loxahatchee are done same-day or next-day, because we know the driveways and the operators on them before we arrive. If your gate won’t open, sags, or cycles erratically, call (855) 360-5306 and we’ll give you a straight answer and a written quote before any work starts.

Call (855) 360-5306

We cover all of 33469, from the riverfront streets off Beach Road to the older ranches west of US-1, and we stock parts locally for the brands most common across Tequesta. Nelson Arrieta built Archway Gate Repair to be one thing: a gate-only specialist. That means when we pull up to your property, the diagnosis starts with the brand on your post, not a guess.

Why Archway Gate Repair Is Tequesta’s Preferred Gate Repair Company

Tequesta homeowners keep calling us back because we already know their gate. We service BFT, Linear, Viking, and Ghost Controls operators regularly, and most of the time the problem is a part we’ve replaced a hundred times on similar systems along the Intracoastal. There’s no trial-and-error labor billed while we figure out an unfamiliar board.

Nelson Arrieta’s team has worked gates on Country Club Drive, along the Loxahatchee riverfront, and in the older neighborhoods off Tequesta Drive. That local route knowledge means we schedule Tequesta calls in a tight window and show up ready. We’re not a general handyman fitting your gate between fence jobs. Every call we take is a gate call.

Our repair-first approach is the reason Tequesta customers trust the quote we put in front of them. If a hinge post can be reset and a marine-grade arm swapped in, we’ll say so. If a 1980s operator has no drop-in board and you’d spend more retrofitting than replacing, we’ll tell you that too, with numbers.

Metal Gate Repair in Tequesta

Metal Gate Repair in Tequesta is our most common call, and salt air is the reason. The onshore breeze off the Atlantic and the river mouth pushes a fine, corrosive mist across properties from North Beach Road down to the village, and that mist eats steel hardware faster than the electronics ever wear out. A metal gate here typically needs hinge replacement, post re-setting, or an operator arm swap long before the motor quits.

Rust is the main failure. We cut out seized pins, re-sleeve hinges, and re-hang panels so they swing level again. For riverfront properties where the salt spray never stops, we recommend marine-grade stainless hardware instead of galvanized steel. It costs more up front, but it’s the difference between a 3-year fix and a 15-year fix on a swing gate that faces the water.

Hinge and Post Work on Tequesta’s Waterfront Lots

The saturated, sandy soil along the river and Intracoastal causes fence and gate posts to shift with heavy rain. A gate that dragged last week may bind completely after a summer storm pulls the post off plumb. We reset posts in concrete, correct the sag, and re-align the latch so the gate cycles clean without forcing it.

Metal gate repair in Tequesta typically runs $190 to $430 for hinge and post work on a standard driveway swing gate. Larger ornamental aluminum gates with decorative panels or custom cedar inserts will run higher because the panel has to come down, get re-hung, and be adjusted for clearance.

Welding and Rust Repair on Older Wrought Iron Gates

Many of the mid-century ranches west of US-1 still have original wrought-iron gates with rusted bottom rails and cracked welds. We weld in new steel sections where the rust has thinned the frame, grind back the corrosion, and repaint the repair to match. If the frame has lost too much material, we’ll say so plainly. Some gates are worth saving; some are past it.

Wood Gate Repair in Tequesta

Wood Gate Repair in Tequesta usually means a cedar or pressure-treated driveway gate that’s absorbed months of humidity and now sags, drags, or won’t latch. Tequesta’s subtropical climate keeps wood swollen through summer, then dry-season contraction loosens every joint. Add salt air and you get hinge screws that strip out of softwood and corner brackets that pull loose.

We rebuild sagging wood gates by re-securing the frame with structural brackets, replacing rotted sections, and re-hanging the panel on hinges rated for the gate’s actual weight, not the hardware that came with the kit. If the wood is soft to the core, we’ll quote a rebuild before we try to patch it. The honest answer saves you a second repair six months later.

Coastal Humidity and Wood Gate Frames

Waterfront properties in 33469 get the worst of it: constant humidity, salt-laden morning air, and full sun on the south-facing panels. That cycles wood through expansion and contraction that breaks the original corner joints. We install longer stainless screws, steel corner ties, and real bracket supports so the gate frame stays square instead of slowly racking itself apart.

Re-Hanging and Latching Older Wood Gates

A wood gate that won’t stay latched is a security issue on a street where the gate is the first thing anyone sees from the curb. We align latch posts, replace rusted latch hardware, and adjust the reveal so the gate swings freely without scraping the driveway. Wood gate repair in Tequesta typically runs $165 to $380, depending on whether we’re re-hanging an existing panel or rebuilding a section of rotted frame.

Trusted Brands We Service in Tequesta

We work on the brand already on your property. Across Tequesta we see BFT swing operators on the newer Mediterranean-style builds, Linear and Viking openers on mid-2000s automatic driveway gates, and Ghost Controls retrofits on older manual gates that owners converted for remote access. Our techs know each system’s failure points before they arrive, which means the diagnosis doesn’t start with a guess or a parts manual we’ve never opened. For Tequesta customers, we keep common boards, arms, and safety sensors in stock for these brands, so a Tuesday repair doesn’t become a waiting game for a shipped part. Diagnosed, not guessed.

Common Gate Repair Problems We See in Tequesta Homes

• Salt-corroded hinges on riverfront properties: The onshore breeze off the Loxahatchee and the Intracoastal seizes hinge pins and rusts through operator arms within a few seasons. We replace standard steel hardware with marine-grade stainless and re-hang the gate so it cycles without binding.
• Lightning and storm-surge shorted control boards: Tequesta’s summer thunderstorms, especially the ones that knock out power along Beach Road and Riverside Drive, spike through openers and take out boards that weren’t grounded against the surge. We source replacement boards for existing operators or retrofit a compatible current model when the original is discontinued.
• Legacy gates without modern safety sensors: A lot of 1980s and 1990s gates in Tequesta have never been upgraded with UL 325 photo-eyes or edge sensors. On a repair call, we’ll test what’s there. If the sensors are missing or failed, installing a working pair is part of getting the gate compliant, not an afterthought.
• Shifted posts in sandy riverside soil: The ground along the Loxahatchee is loose and saturated, especially after hurricane-season rain events. Gate posts shift, panels sag, and the latch misses. We reset posts in concrete and re-align the gate so it actually closes and locks.

Pricing for Gate Repair in Tequesta, FL

We Also Serve Cities Near Tequesta

Archway Gate Repair handles calls throughout Tequesta and the surrounding area, including Jupiter, Limestone Creek, Juno Beach, and Hobe Sound. If you’re just outside the village limits, call us anyway. We’re a full-service Gate Repair specialist and we’ll let you know if we can reach you on the same route.

FAQs About Gate Repair in Tequesta

When to Retire a Tequesta Gate

Some gates in this village are worth restoring. Others aren’t. On a riverfront street off the Loxahatchee, our tech answered a call where a 1990s LiftMaster swing gate had seized after a thunderstorm. The operator arm was rusted solid and the hinge post had pulled loose in the saturated footing. We corrected the sag at the post, replaced the arm with marine-grade stainless, and added a working safety photocell pair before re-hanging the panel. The gate now cycles clean despite the salt breeze that killed the original hardware.

That repair made sense because the panel itself was still sound. But when a gate’s frame has rusted through in multiple places, the post is split below grade, or the operator board has no compatible replacement and the motor and gearbox are also worn, patching it together costs more than a new gate installed correctly the first time. We’ll show you the math on both options and let you decide. Repair first, replace only when necessary.

Call Archway Gate Repair for Gate Service in Tequesta, FL

If your gate is stuck open, sagging, or refusing to cycle, call (855) 360-5306 for a free estimate from a gate-only specialist. Nelson Arrieta and our team cover all of Tequesta, 33469, and the nearby communities with same-day or next-day scheduling whenever possible. We’ll tell you what’s wrong, what it costs to fix, and whether that gate is worth saving. No pressure and no guesswork.

Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Tequesta and the surrounding area.