Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Juno Beach
Gate repair in Juno Beach most often comes down to two things: salt corrosion and legacy equipment that predates modern safety sensors. We fix both. If your gate won’t latch, sags at the hinge, or the motor cycles but the panel won’t move, call (855) 360-5306 and we’ll send a brand-familiar technician to your property, usually within one business day. Our team works across all of Juno Beach, from the oceanfront estates along Ocean Drive to the Intracoastal side north of Donald Ross Road.
We’re Archway Gate Repair, a gate-only specialist. We don’t build fences. We don’t hang drywall. We diagnose and repair gate systems, and that narrow focus is why Juno Beach property managers and homeowners call us when a Gate Repair job needs to be handled correctly the first time. Nelson Arrieta built this company around one principle: repair first, replace only when necessary. That matters here because many Juno Beach gates are custom ornamental iron, and a correct repair preserves what’s already on the property.
Why Archway Gate Repair Is Juno Beach’s Preferred Gate Repair Company
Juno Beach residential gates are not off-the-shelf. Many of the homes here, particularly the mid-century ranches off Ocean Drive and the newer luxury estates on the Intracoastal, have custom driveway gates with operators that were installed decades ago. A general handyman might recognize the brand name. Our technicians know the failure points specific to each system.
We carry the parts that Juno Beach gates actually need: marine-grade stainless hinges, corrosion-resistant control board enclosures, and safety photocells that hold up to humidity and salt spray. That local parts stock means less waiting. When a gate fails on a Friday afternoon on Celestial Way, the homeowner wants it diagnosed and functional before the weekend, not a two-week wait for a shipped part.
Reputation in Juno Beach comes from showing up, naming the actual problem, and fixing it without padding the invoice. Nelson Arrieta expects every tech to explain what failed, why it failed, and what the honest fix costs. That transparency is why property managers along A1A keep our number on file.
Styles & brands we work with
Gate Welding in Juno Beach
Gate welding in Juno Beach is usually structural: cracked hinge plates on heavy ornamental swing gates, broken welds where the panel meets the post, or rust-eaten lower rails on oceanfront gates that have absorbed years of salt air. A typical weld crack or hinge plate repair on a residential gate runs $275 – $550 in Juno Beach. Full post-to-panel re-welding for a larger ornamental gate, where the gate must be removed and bench-welded, typically lands between $600 – $1,100. Every welding quote is agreed before we strike an arc.
Hinge Plate and Post Welding
On Juno Beach properties within a block of the ocean, hinge plates pit and thin out. We grind back to clean steel, weld the plate, and coat with a marine-grade primer and paint. If the hinge post itself has rotted below grade, welding alone won’t hold, and that’s when we reset the footing.
Panel and Rail Repair
Cracked lower rails on aluminum and steel driveway gates are common after a storm. We weld the rail closed, grind it smooth, and match paint as closely as the existing finish allows. A rusted-through rail on a gate that’s already sagging may make replacement the cheaper answer, and we’ll tell you so in plain terms before you spend on a temporary patch.
Commercial Gate Repair in Juno Beach
Commercial gate repair in Juno Beach covers a different set of demands: gates that cycle dozens or hundreds of times per day, access-control systems, safety loop detectors, and operators that must work during power outages. Typical commercial gate service calls in Juno Beach run $350 – $650 for troubleshooting and mechanical adjustment. Control board replacement on a commercial LiftMaster or FAAC operator generally runs $800 – $1,400 depending on the board and the access-control integration. We quote the full number before any work begins.
Loop Detector and Access Control Diagnostics
Commercial gates won’t open reliably when the ground loop detector has failed or the access-control relay is corroded. We diagnose the full circuit, from the card reader and keypad to the loop wire and the operator control board. We test each link so the fix addresses the failure, not the symptom.
High-Cycle Operator Service
Gates at Juno Beach HOA entrances and condo associations see more cycles in a month than a residential gate sees in a year. That wear shows up in motor bearings, limit switches, and V-belts. We service the operator, replace worn components, and recalibrate open and close limits so the gate stops slamming or creeping.
Trusted Brands We Service in Juno Beach
We work on the brand already on your property. That includes LiftMaster, FAAC, BFT, and Linear, plus several others, which means we arrive knowing the board layout on your operator, the typical failure points, and the parts most likely needed. For Juno Beach customers, we stock the most common replacement boards, hinges, and safety sensors locally, so the repair moves faster. Not every brand is a good candidate for repair, and we’ll tell you honestly when a board is obsolete and a retrofit is the better path.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Juno Beach Homes
- Hinge posts rotting below grade: On oceanfront and Intracoastal properties, the original pressure-treated or ungalvanized post soaks up ground moisture and storm surge. The gate sags even when the panel and hinges look intact, and the real fix is resetting the post footing, not cranking the hinge adjustment.
- Corroded control boards from saltwater intrusion: Juno Beach’s salt-laden onshore wind pushes fine salt particles into operator enclosures. Over several years, circuit boards corrode and gates start cycling erratically or fail to open from the keypad. A rebuild often costs less than a full operator replacement.
- Safety photocells out of alignment after storms: Wind gusts shift gate panels enough to misalign photo eyes. The gate refuses to close, or reverses halfway. This is usually a ten-minute adjustment, and it’s the first thing we check on emergency calls right after a nor’easter.
- Swing gates that stop latching cleanly: Salt air pits the latch and striker plates on ornamental gates. The gate closes but doesn’t secure, which matters when a hurricane warning is posted. We replace latch hardware with stainless or marine-grade components that don’t seize in the humidity.
Pricing for Gate Repair in Juno Beach, FL
Most residential gate repair calls in Juno Beach fall between $180 and $550. A simple hinge adjustment or latch replacement on a swing gate runs $180 – $300. Control board replacement on a residential operator is typically $450 – $900. Gate welding and post resetting run $275 – $1,100 depending on gate weight and access. What affects cost: proximity to the ocean (more corrosion means more prep work before welding), gate construction (ornamental iron versus aluminum), and whether the operator was installed before modern safety standards, which sometimes adds the cost of retrofitting photocells or a replacement board. Every Juno Beach customer receives a written, itemized quote before we begin. No surprises on the invoice. Call (855) 360-5306 for a free estimate.
We Also Serve Cities Near Juno Beach
Our technicians cover the northern Palm Beach County coastline, so if your property is in Juno Beach or nearby, you’re in our service area. We also handle gate repair in Jupiter, Tequesta, North Palm Beach, and Limestone Creek. Same level of brand familiarity and marine-grade hardware expertise, same repair-first approach.
Serving Juno Beach, FL — Our Local Coverage Area
We’re based in the Juno Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Juno Beach
If the control board is still manufactured, we can retrofit it directly, and that’s usually the cheaper fix at $450 – $900 on a residential operator. If the board is obsolete, which we see often on legacy LiftMaster and FAAC units in Juno Beach, we look at a modern retrofit board that works with your existing motor and limit switches. When the motor is also failing, replacement becomes the cheaper long-term answer. We’ll show you the numbers and let you decide. Call (855) 360-5306 and we’ll diagnose the board on site.
Because the problem is usually the hinge post, not the panel. In Juno Beach’s salt-laden onshore wind, the post rots below grade while the visible part above the ground still looks intact. The gate sags because the post is leaning, and no hinge adjustment will fix that. We reset the post footing with marine-grade anchoring and install stainless hinges so the sag doesn’t return after the next storm season.
Yes, and many older Juno Beach gates were hung before safety photocells were required. Current code and good practice call for a photo eye or safety edge that reverses the gate if a person, pet, or vehicle enters its path. We can retrofit a working photocell pair on most existing operators for $350 – $650, which is far less than a liability claim from a closing gate. We’ll confirm what your system needs during the estimate.
Yes, and we prioritize emergency calls when storm warnings are posted. After a nor’easter, we see gates that won’t latch because the panel twisted, hinges that seized from saltwater intrusion, and posts that loosened in saturated ground. We shore up, straighten, and secure the gate, then address the hardware so it will hold through the next wind event. Call (855) 360-5306 and we’ll give you our first available arrival in Juno Beach.
Yes. We service commercial gate operators, access control panels, safety loop detectors, and all associated wiring for HOA entrances, condominium complexes, and commercial properties throughout Juno Beach. Loop detector replacement and tuning is routine work for our technicians, not a referral out. We’ll quote the diagnostic and the repair before touching the system.
If your gate is stuck, sagging, or cycling erratically anywhere in Juno Beach, call (855) 360-5306 for a free estimate. Nelson Arrieta and the Archway Gate Repair team diagnose the actual failure, quote the honest fix, and stand behind the work. From the motor to the hinge, we fix gates right.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Juno Beach and the surrounding coastal communities.