Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Juno Beach, FL
Gate installation in Juno Beach starts with understanding what salt air and hurricane gusts do to metal. We install driveway gates, pedestrian gates, and automated systems built for this coastline, from mid-century ranch homes to Intracoastal estates. Most Juno Beach properties need marine-grade fasteners and corrosion-resistant hardware on day one. If you’re planning a gate project or your current one has failed, call Archway Gate Repair at (855) 360-5306.
Why Juno Beach Homes Are Different
Juno Beach sits on a narrow barrier island where the Atlantic is never more than a few blocks east and the Intracoastal runs along the west edge. That geography means every gate here lives in salt-laden wind. Hinges rust faster. Control boards corrode at the terminals. Powder coating that would last a decade inland starts showing pitting in three or four years unless it’s marine-spec from the start.
The housing stock spans three eras. The mid-century ranches along the quieter streets often have original swing gates on steel posts that predate modern automation. The newer oceanfront and Intracoastal estates trend toward heavy ornamental gates, wrought-iron or aluminum, with custom driveway and pool enclosures. Those gates are beautiful but heavy, and weight matters when a motor has to move them through wind. Juno Beach also sits in a high-wind zone under Miami-Dade and Palm Beach County building codes, so gate posts need deeper footings and stronger anchoring than inland jobs. HOA rules in 33477 often dictate gate style, height, and even the finish color, particularly in waterfront communities. We quote every job with those realities in the number.
Styles & brands we work with
Our Main Juno Beach Services
Most calls from Juno Beach fall into two categories: a gate that won’t move and an operator that quit. Both have dedicated pages with the full detail.
Gate Repair in Juno Beach
Manual and automated gates in Juno Beach fail in predictable ways, and salt air is usually behind at least one of them. Hinges seize. Weld points crack under wind load. Gates that once swung clean start dragging because the post has shifted in sandy soil. Our repair work means fixing what’s broken, not rubber-stamping a replacement quote. We work on the brand already on your property. Gate Repair in Juno Beach covers the mechanical side, from hinge replacement to full gate re-hanging.
Electric Gate Repair in Juno Beach
An electric gate that won’t open in Juno Beach is an access problem, not just a noise complaint. We diagnose motors, control boards, safety loops, photo eyes, and wiring on every major brand before recommending a fix. Corrosion on board terminals and salt intrusion in the operator housing are the two most common calls we get after a storm or a long humid stretch. Electric Gate Repair in Juno Beach covers the electrical diagnosis in detail.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Juno Beach
Gate installation in Juno Beach means building for salt, wind, and access needs from the first footing. Whether it’s an automatic driveway gate for a new estate or a sliding gate for a narrow Intracoastal lot, the materials and anchoring have to match the coast. We handle the full project from measured site survey to final programming. Here’s the detail behind what we offer for Gate Installation.
Automatic Gate Installation
Signs you need it
A gate that swings by hand today but sits on a driveway too long to walk from the car is the classic trigger for automation, and in Juno Beach, gate automation also keeps the gate latched through wind gusts.
What it costs in Juno Beach
Automatic gate installation in Juno Beach typically runs from $3,200 to $7,900, with the operator often making up $800 to $2,400 of that as an add-on or replacement component.
How we do it
We mount and align the operator, set travel limits, install and test all external safety entrapment protection devices, and program remotes and keypads before we call the job done.
Driveway Gate Installation
Signs you need it
If the old gate has rusted through at the bottom rail or the post has leaned enough that the gate won’t close square, a new driveway gate installation is often cheaper than repeated repairs on failing steel.
What it costs in Juno Beach
New driveway gate installation in Juno Beach typically ranges from $2,400 to $6,100, depending on gate material, width, and whether automation is added.
How we do it
We measure the opening, check for grade slope and drainage, pour new posts or retrofit existing pillars, hang the gate with marine-grade hardware, and set hinges so the gate swings true in prevailing wind.
Sliding Gate Installation
Signs you need it
Juno Beach lots on the Intracoastal often have driveways too short for a swing gate to arc open, which is when a sliding gate installation becomes the practical solution.
What it costs in Juno Beach
Sliding gate installation in Juno Beach typically falls between $2,800 and $6,700, with heavier cantilevered designs running toward the upper figure.
How we do it
We set the track or cantilever post base, install the gate with correct roller spacing, mount the operator if specified, and test full travel with the safety edges and photo eyes in place.
What Gate Installation Costs in Juno Beach
| Item | Typical range in Juno Beach |
|---|---|
| Driveway gate installation | $2,400 – $6,100 |
| Sliding gate installation | $2,800 – $6,700 |
| Automatic gate installation (complete) | $3,200 – $7,900 |
Do I need a permit for a new gate in Juno Beach?
Most automated gate projects in Juno Beach need a permit, especially for electrical work and for gates near the right-of-way. We confirm current Palm Beach County and Town of Juno Beach requirements before quoting, and the permit cost sits outside the gate itself.
How long does a Juno Beach gate installation take?
Most installations finish in one or two days once the gate and operator are on site. Custom gate fabrication adds lead time of two to four weeks. Call (855) 360-5306 and we’ll give you a written schedule with your quote.
Brands We Service in Juno Beach
We work on LiftMaster, FAAC, BFT, and Linear systems daily, and we know where each one fails in coastal conditions. Parts for these brands are stocked locally in our Miami Gardens shop, so most Juno Beach repairs don’t wait on shipping. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Juno Beach, FL
| Service | Typical range in Juno Beach |
|---|---|
| Gate repair diagnostic | $50 – $150 (waived with repair) |
| Driveway gate installation | $2,400 – $6,100 |
| Sliding gate installation | $2,800 – $6,700 |
| Automatic gate installation (complete) | $3,200 – $7,900 |
| Electric gate opener add-on | $800 – $2,400 |
| Electric gate motor replacement | $700 – $1,500 |
| Control board replacement | $500 – $1,200 |
| Gate hinge replacement | $250 – $650 |
| Gate safety sensor replacement | $300 – $750 |
Two things push prices higher in Juno Beach: marine-grade stainless hardware instead of standard zinc, and the deeper post footings required in this wind zone. You approve a written price before we start any work, and that’s the number on the invoice.
Neighborhoods We Serve in Juno Beach
We work across all of 33477, from the oceanfront streets east of A1A to the Intracoastal-side neighborhoods west of Ellison Wilson Road. Most repair calls in Juno Beach get a same-day or next-day visit, with installation work scheduled around permitting.
- Juno Dunes
- Juno Beach Oceanfront
- Juno Ridge
- North Juno Beach
- Intracoastal Juno Beach
Service Area – Cities Near Juno Beach
Archway Gate Repair runs a short route into Juno Beach from our Miami Gardens shop, and we serve the same corridor up and down the coast. If you’re just over the line, see our pages for Limestone Creek, FL, Jupiter, FL, Tequesta, FL, and North Palm Beach, FL.
Serving Juno Beach, FL — Our Local Coverage Area
We’re based in the Juno Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Juno Beach
We schedule same-day or next-day repair visits in Juno Beach for urgent failures, especially gates stuck open or stuck closed. Installations take a few days of lead time. Call (855) 360-5306 and we’ll confirm the next open slot.
Yes, many Juno Beach communities, particularly the waterfront HOAs, have standards for gate height, material, finish color, and even automation type. We ask for your governing documents or property manager contact before finalizing a quote so the job passes review the first time.
Yes. From the motor to the hinge, the operator, wiring, control board, safety loops, and the gate hardware itself are all in our scope. You don’t coordinate a separate electrician for the gate run.
If you need a gate specialist in Juno Beach, call Archway Gate Repair at (855) 360-5306. We’ll diagnose what’s actually wrong, price it fairly, and fix or install it so it holds up to the coast.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Juno Beach Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Craig Barrett"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Ernesto Flores"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Roger Ziegler