Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Miami, FL
Gate installation in Miami means working with salt air, hurricane code, and housing stock that runs from 1950s CBS-block homes in Little Havana to newer aluminum-fitted builds out west. Archway Gate Repair handles the full job: new automatic gate systems, driveway gates, and sliding gates, sized and anchored for Miami-Dade’s high-velocity hurricane zone requirements. We’re a gate-only specialist, so the crew that welds your frame is the same crew that wires your operator. Call (855) 360-5306 for a free estimate and a written price before any work starts.
Why Miami Homes Are Different
Miami’s pre-1960s masonry homes create a specific set of gate problems. In the 33125 and 33101 corridor, original wrought-iron gates from the 1950s through the 70s hang on thin lags driven into 60-year-old CBS block. When we pull those anchors, the block often crumbles around them, so through-bolts or epoxy anchors become the only reliable fix. A gate that looked solid for decades suddenly needs structural work because the wall behind it gave out, not the gate itself.
Then there’s the climate. Salt-laden humidity off Biscayne Bay works on steel year round, pitting operator housings and seizing hinges that would last decades inland. Summer rain accelerates it. By June, we’re replacing corroded control boards and freeing rust-welded hinges across Miami. During hurricane season, from June through November, every named storm brings a wave of bent tracks, stripped operators, and anchors pulled clean out of concrete. Miami-Dade’s post-1992 building code also requires exterior gates and operators to meet wind-borne debris standards, which means permitted gate work here is evaluated differently than in Broward. Non-compliant gate repairs get flagged at inspection or by insurers, so the anchoring and hardware choices matter before the first bolt goes in.
In Little Havana and along the 33125/33101 corridor specifically, many gates sit within a few feet of mature royal palms. Those roots heave driveways and rack tracks out of alignment slowly, year after year. By the time a gate jams, the track has usually been fighting the slab for a long time. We see it constantly.
Styles & brands we work with
Our Main Miami Services
Most Miami homeowners and property managers call us for two reasons: a gate that stopped working, or an electric gate that works sometimes and fails others. Both are covered in depth on their own Miami pages.
Gate Repair in Miami
Wrought-iron gates on older Miami homes fail at the hinges and anchors first, not the operator. We repair sagging gates, rust-seized posts, bent tracks, and latch failures on the original equipment whenever possible. Our repair-first approach means we quote the fix before we quote the replacement. For the full breakdown of mechanical gate work in Miami, including what common failures cost, see Gate Repair in Miami.
Electric Gate Repair in Miami
Miami’s humidity and storm surges are hard on control boards, motors, safety loops, and wiring. Electric gate repair is a core specialty for us, not a referred-out job. We carry boards and parts for LiftMaster, FAAC, BFT, Linear, and other common brands so diagnosis doesn’t become a week of waiting. For motor failures, sensor issues, and operator troubleshooting specific to Miami, see Electric Gate Repair in Miami.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Miami
Gate installation in Miami means anchoring a new system to survive hurricane wind loads and salt air, not just setting posts. On pre-1960s CBS homes in the 33125 and 33101 corridor, that often means through-bolting or epoxying into block that has already started to break down around the old gate’s anchors. On newer west and southwest Miami builds, aluminum and vinyl gates call for different hardware and bolt-on service capability, so we plan the install around the wall or slab we’re actually working with. Every new gate we install in Miami is quoted and agreed before work begins, and we anchor to current Miami-Dade high-velocity hurricane zone specs. For service details beyond installation, see Gate Installation.
Automatic Gate Installation
Signs you need it
Your current gate opens by hand, or the old operator has failed enough times that repair no longer makes sense.
What it costs in Miami
Automatic gate installation in Miami typically runs $2,400 to $5,800 for a complete single driveway system, including the operator, safety edges, and control board.
How we do it
We assess the existing gate weight and span, set or reinforce the posts, mount the operator, run power and safety loops, and program travel limits before testing full cycles.
Sliding Gate Installation
Signs you need it
Your property has a wide driveway or a gate that swings into a sloped or tree-rooted area where a swing arc keeps jamming.
What it costs in Miami
Sliding gate installation in Miami typically costs between $3,100 and $6,200, with the track, rollers, and motor as the main line items.
How we do it
We lay and level the track on a reinforced concrete pad, hang the gate on roller trucks, mount the motor, and set the open and close limits with safety sensors in place.
What Gate Installation Costs in Miami
| Item | Typical range in Miami |
|---|---|
| Automatic gate installation (complete single driveway system) | $2,400 – $5,800 |
| Sliding gate installation | $3,100 – $6,200 |
| Driveway gate installation | $2,800 – $5,500 |
How long does gate installation take in Miami?
Most single-driveway gate installations in Miami take one to two days on-site. Concrete work for sliding gate tracks adds a day for curing before the gate is hung and the operator is programmed.
Call (855) 360-5306 for an exact timeline and a written quote. Estimates are free.
Do I need a permit for a new gate in Miami?
In most of Miami-Dade, yes. Exterior gates and operators must meet post-1992 wind-borne debris standards, and permitted work gets inspected. We build to those specs from the first anchor.
Call (855) 360-5306 to confirm what your specific Miami property requires. Estimates are free.
Brands We Service in Miami
We work on the brand already on your property. In Miami, that’s most often LiftMaster, FAAC, BFT, or Linear on the operator side, with a mix of wrought-iron, aluminum, and vinyl gates on the structure side. We stock common boards, sensors, and remotes locally so a diagnosis can turn into a same-day fix. See our brands for the full list we carry and service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Miami, FL
| Service | Typical range in Miami |
|---|---|
| Automatic gate installation | $2,400 – $5,800 |
| Sliding gate installation | $3,100 – $6,200 |
| Driveway gate installation | $2,800 – $5,500 |
| Gate operator replacement | $850 – $2,100 |
| Control board replacement | $350 – $800 |
| Safety sensor replacement | $180 – $350 |
| Hinge and weld repair | $220 – $520 |
| Track realignment | $250 – $550 |
Prices in Miami push upward when a gate is anchored to crumbling CBS block, when salt corrosion has spread beyond the visible hinge, or when a hurricane code inspection requires upgraded anchorage. You’ll get the full price in writing and agreed to before we start, so there’s no surprise on the invoice.
Neighborhoods We Serve in Miami
We work across Miami’s older masonry corridors and the newer developments west and south. Most calls come from the 33125 and 33101 corridor, but our territory covers the full city. We typically respond within one business day for non-emergency calls, and we prioritize emergency gate failures that leave a property unsecured.
- Little Havana
- Allapattah
- Brownsville
- Coconut Grove
- Coral Gables
Service Area – Cities Near Miami
Archway Gate Repair serves Miami and the surrounding communities. If your property is in Allapattah, FL, we’re already working that corridor regularly. We also cover Brownsville, FL, Coconut Grove, FL, and Coral Gables, FL. Call (855) 360-5306 to confirm we cover your specific address.
Serving Miami, FL — Our Local Coverage Area
We’re based in the Miami area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Miami
For a gate that won’t close and leaves a property unsecured, we prioritize same-day response across Miami. Most non-emergency repairs are scheduled within one business day. Call (855) 360-5306 and tell us what the gate is doing, or not doing.
Yes. Archway Gate Repair is a state-licensed and insured gate specialist serving Miami. We build and repair to Miami-Dade’s high-velocity hurricane zone requirements, which matters for both safety and insurance. Estimates are always free.
Yes. From the motor to the hinge, we handle the full system: welding, track work, anchors, control boards, safety loops, and wiring. You don’t need a second company for the electric side. Call (855) 360-5306 for a free estimate on any gate problem in Miami.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Miami Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Craig Barrett"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Ernesto Flores"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Roger Ziegler