Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Delray Beach, FL
Gate installation in Delray Beach runs anywhere from $1,800 for a basic single swing gate to $9,500+ for a heavy sliding or custom automatic system, with most mid-range driveway jobs landing between $3,000 and $6,500. What makes Delray Beach different is the split between the gated communities west of I-95, where 1980s and 1990s operators are reaching the end of their service life, and the historic districts near Atlantic Avenue, where sandy soil shifts posts and throws everything out of plumb. Call Archway Gate Repair at (855) 360-5306 and we’ll tell you whether you need a full install or a retrofit.
Why Delray Beach Homes Are Different
Delray Beach gate work is really two separate trades sharing one ZIP code. West of I-95 in the country-club communities like the ones off Atlantic Avenue’s western stretch, you’re dealing with community perimeter walls, pedestrian gates, and driveway gates from the 1980s and 1990s. A lot of those original slide and swing operators use control boards and gearboxes that manufacturers stopped supporting years ago. We end up retrofitting LiftMaster and FAAC operators into legacy tracks and posts instead of tearing out the whole gate, which saves thousands on steel work that doesn’t need replacing.
East of I-95, especially in the historic districts near downtown and beachside in 33483, the problem is usually the ground, not the electronics. Those 1920s-era bungalows and mid-century ranch homes often have decorative wrought-iron pedestrian gates hung on original masonry or concrete posts. The sandy soil Delray Beach sits on shifts, posts lean, and the gate binds. You can’t just adjust hinges. The gate has to come down, get re-plumbed, and go back up square. Add year-round humidity, salt-laden onshore breezes, and June-through-November wind loads, and every hinge, fastener, and operator housing here needs to be treated as storm-readiness hardware, not just convenience hardware.
Styles & brands we work with
Our Main Delray Beach Services
Most Delray Beach callers reach out for one of two reasons: a gate that stopped moving, or a gate that moves but shouldn’t. Here’s what each service actually covers.
Gate Repair in Delray Beach
We repair the mechanical side of any gate: hinges, posts, frames, latches, wheels, and tracks. In Delray Beach’s beachside ZIP codes, salt air accelerates fastener corrosion to the point where stainless replacement hardware is the norm, not an upgrade. In the western gated communities, we often find original 1980s slide gates with worn wheels and deformed track. Gate Repair in Delray Beach covers the diagnosis, the hardware, and the honest call on whether a repair will hold or an install makes more sense.
Electric Gate Repair in Delray Beach
This is the specialty: motors, control boards, safety loops, photo eyes, and the wiring in between. Delray Beach’s humidity and lightning season are hard on circuit boards, and many western communities still run older DoorKing and Mighty Mule systems that fail progressively. We work on the board, the capacitor, the limit switches, and the receiver before we ever talk replacement. Electric Gate Repair in Delray Beach is diagnosis-first work, and most calls are back online the same visit.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Delray Beach
Gate installation in Delray Beach means matching the new system to the property: a wind-load-rated aluminum driveway gate for a country-club villa west of I-95, a galvanized steel sliding gate for a commercial lot off Congress Avenue, or a decorative pedestrian gate for a historic bungalow near Swinton. The climate here punishes anything short of coated or stainless hardware, and the wrong operator on a heavy gate fails within two seasons. We do the full install, from the concrete work to the final operator programming, so the gate meets current wind-load code and doesn’t bind on a sandy, shifting post line. If you’re weighing a full replacement, see Gate Installation for what’s involved.
Automatic Gate Installation
Signs you need it
You’re still opening the gate by hand after every delivery, visitor, or storm check, and the property needs controlled access that doesn’t depend on who’s home.
What it costs in Delray Beach
Automatic gate installation in Delray Beach typically runs $3,200 to $8,000, depending on gate weight, operator type, and how much electrical work the control run requires.
How we do it
We confirm the post and hinge load rating, set the operator and control box, pull the low-voltage run from the nearest power source, wire the safety loops and photo eyes, and program remotes and keypad codes on site.
Driveway Gate Installation
Signs you need it
Your current driveway gate sags, drags on the apron, or has been patched with shims and washers so many times that it no longer closes square against the stop.
What it costs in Delray Beach
A single swing driveway gate in Delray Beach runs $1,800 to $4,500 installed, while a sliding driveway gate on a track runs $3,000 to $7,500.
How we do it
We remove the old gate, set or reuse posts after checking plumb and footing depth, hang the new gate with adjustable stainless hinges or fit the new track assembly, and then align the latch or operator pickup point.
Sliding Gate Installation
Signs you need it
Your gate swings across a short driveway or narrow setback and you need the full opening without a gate leaf taking up swing radius, or a cantilever slide would jump a dragging track problem.
What it costs in Delray Beach
Sliding gate installation in Delray Beach typically starts around $3,000 and reaches $9,500 for heavy commercial gates or long cantilever spans.
How we do it
We set the track or cantilever rollers with proper concrete footings, hang the gate frame with anti-lift guides, attach the chain or rack drive, and dial in limit switches and safety edges.
What Gate Installation Costs in Delray Beach
| Item | Typical range in Delray Beach |
|---|---|
| Single swing gate (manual) | $1,800 – $4,500 |
| Automatic gate system (operator + gate) | $3,200 – $8,000 |
| Sliding gate (track or cantilever) | $3,000 – $9,500 |
How long does a gate installation take in Delray Beach?
Most residential installs take one to two days, including concrete cure time for new post footings or slide tracks. Commercial or custom work can run three to four days, especially when HOA approvals or permit inspections fall between the demo and the final programming.
Do I need HOA approval for a new gate in Delray Beach?
Yes, in nearly every gated community west of I-95. We can supply the gate spec sheet, wind-load rating, and operator details your board or property manager asks for. The install itself follows whatever approved style and finish the community documents specify. Call (855) 360-5306 and we’ll work to the HOA’s requirements.
Brands We Service in Delray Beach
We work on the brand already on your property. Across Delray Beach we service LiftMaster, FAAC, Mighty Mule, and Elite systems most often, and we carry the boards, remotes, loops, and safety edges for those brands in the truck. Most common repairs on those names can be quoted on the spot because we know the system’s failure points before we arrive. See our brands for the broader list we stock and service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Delray Beach, FL
| Service | Typical range in Delray Beach |
|---|---|
| Gate repair (mechanical, general) | $150 – $650 |
| Electric gate repair | $140 – $550 |
| Controls, wiring & safety systems | $140 – $500 |
| Hydraulic motor repair | $350 – $850 |
| Pneumatic operator valve rebuild | $200 – $500 |
| Wheel & idler replacement | $150 – $450 |
| Swing gate hinge replacement | $180 – $450 |
| Single swing gate installation (manual) | $1,800 – $4,500 |
| Automatic gate installation (operator + gate) | $3,200 – $8,000 |
| Sliding gate installation | $3,000 – $9,500 |
In Delray Beach, beachside and Intracoastal-adjacent jobs push price up when salt corrosion forces stainless or coated hardware throughout. Large custom gates in the western country-club communities cost more when spans exceed 14 feet and operators need to be upsized for wind-load weight. Regardless of the line item, we quote the full price before any work starts and confirm it by phone, so there is no surprise on the invoice.
Neighborhoods We Serve in Delray Beach
Archway Gate Repair covers all of Delray Beach from the historic districts east of Swinton to the gated communities west of I-95, and our response for much of the area is same-day for emergency gate issues. We’re regularly working in:
- Lake Ida and the neighborhoods around Swinton Avenue
- Historic districts near downtown and Atlantic Avenue
- Kings Point and the 55+ communities off West Atlantic
- Golf and country-club communities west of I-95
- Beachside and Intracoastal properties in 33483
Service Area – Cities Near Delray Beach
We cover the full Delray Beach area plus the neighboring communities just south and north. That includes Kings Point, FL directly to the west, Highland Beach, FL along the coast, Villages of Oriole, FL to the northwest, and Boynton Beach, FL one exit up I-95. If you’re not sure whether we cover your property line, call and we’ll tell you straight.
Serving Delray Beach, FL — Our Local Coverage Area
We’re based in the Delray Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Delray Beach
For a gate that’s stuck open or won’t close, we typically reach Delray Beach properties the same day. If your gate is holding a vehicle in or out, tell us that on the first call and we’ll prioritize the response. Call (855) 360-5306 and we’ll give you a real arrival window.
We handle the gate-specific paperwork. For gated communities west of I-95, that usually means supplying wind-load ratings and operator specs to the HOA and coordinating with the property manager on approved colors and styles. For new installs, we pull or confirm permits based on what the job requires.
Yes. We service residential driveway and pedestrian gates, plus commercial slide and swing gates at condos, storage facilities, and business lots throughout Delray Beach. The repair-first approach is the same: diagnose, quote, fix. Call (855) 360-5306 to schedule a diagnosis or get a free estimate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Delray Beach Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Danika Ellison"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Chris Padgett"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Michelle Ackerman